linux.git/drivers/net/wireless/ath, branch v5.4.64 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Revert "ath10k: fix DMA related firmware crashes on multiple devices" 2020-09-03T09:26:49+00:00 Zhi Chen zhichen@codeaurora.org 2020-01-14T04:35:21+00:00 93709d8ade000d8b28bfdcfe6fa51d7d21074693 [ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ] This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ]

This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e.
PCIe hung issue was observed on multiple platforms. The issue was reproduced
when DUT was configured as AP and associated with 50+ STAs.

For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size
of the RD/WR access to the HOST MEM.
0 - No split , RAW read/write transfer size from MAC is put out on bus
    as burst length
1 - Split at 256 byte boundary
2,3 - Reserved

With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when
issue happened. It broke PCIe spec and caused PCIe stuck. So revert
the default value from 0 to 1.

Tested:  IPQ8064 + QCA9984 with firmware 10.4-3.10-00047
         QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044
         Synaptics AS370 + QCA9888  with firmware 10.4-3.9.0.2--00040

Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ath10k: Acquire tx_lock in tx error paths 2020-08-19T06:16:06+00:00 Evan Green evgreen@chromium.org 2020-06-04T17:59:11+00:00 b4a09e491d38cbc048a6123a200ac9d8f522dc18 [ Upstream commit a738e766e3ed92c4ee5ec967777276b5ce11dd2c ] ath10k_htt_tx_free_msdu_id() has a lockdep assertion that htt->tx_lock is held. Acquire the lock in a couple of error paths when calling that function to ensure this condition is met. Fixes: 6421969f248fd ("ath10k: refactor tx pending management") Fixes: e62ee5c381c59 ("ath10k: Add support for htt_data_tx_desc_64 descriptor") Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604105901.1.I5b8b0c7ee0d3e51a73248975a9da61401b8f3900@changeid Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a738e766e3ed92c4ee5ec967777276b5ce11dd2c ]

ath10k_htt_tx_free_msdu_id() has a lockdep assertion that htt->tx_lock
is held. Acquire the lock in a couple of error paths when calling that
function to ensure this condition is met.

Fixes: 6421969f248fd ("ath10k: refactor tx pending management")
Fixes: e62ee5c381c59 ("ath10k: Add support for htt_data_tx_desc_64 descriptor")
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604105901.1.I5b8b0c7ee0d3e51a73248975a9da61401b8f3900@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
ath10k: enable transmit data ack RSSI for QCA9884 2020-08-05T07:59:41+00:00 Abhishek Ambure aambure@codeaurora.org 2019-10-03T13:45:22+00:00 2ff65580d477d4275b652799c472e763bd09992a commit cc78dc3b790619aa05f22a86a9152986bd73698c upstream. For all data packets transmitted, host gets htt tx completion event. Some QCA9984 firmware releases support WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data ack rssi values to host through htt event of data tx completion. Data ack rssi values are valid if A0 bit is set in HTT rx message. So enable the feature also for QCA9884. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00044 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> [kvalo@codeaurora.org: improve commit log] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cc78dc3b790619aa05f22a86a9152986bd73698c upstream.

For all data packets transmitted, host gets htt tx completion event. Some QCA9984
firmware releases support WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data
ack rssi values to host through htt event of data tx completion. Data ack rssi
values are valid if A0 bit is set in HTT rx message. So enable the feature also
for QCA9884.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
[kvalo@codeaurora.org: improve commit log]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath9k: Fix regression with Atheros 9271 2020-07-29T08:18:46+00:00 Mark O'Donovan shiftee@posteo.net 2020-07-11T04:33:24+00:00 c15d59b9451129395ebeb6984409c3017fd42342 commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream. This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan <shiftee@posteo.net> Reported-by: Roman Mamedov <rm@romanrm.net> Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream.

This fix allows ath9k_htc modules to connect to WLAN once again.

Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Roman Mamedov <rm@romanrm.net>
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb 2020-07-29T08:18:46+00:00 Qiujun Huang hqjagain@gmail.com 2020-04-04T04:18:38+00:00 e6eb815beccca7018ce7b7c4b52059712dd1232d commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb" 2020-07-16T06:16:45+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-07-14T12:03:44+00:00 5a046d75acf74b7fd889dca11120e42733f6f46d This reverts commit b5c8896bc14f54e5c4dd5a6e42879f125b8abd2d which is commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. It is being reverted upstream, just hasn't made it there yet and is causing lots of problems. Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit b5c8896bc14f54e5c4dd5a6e42879f125b8abd2d which is
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

It is being reverted upstream, just hasn't made it there yet and is
causing lots of problems.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
carl9170: remove P2P_GO support 2020-06-22T07:31:18+00:00 Christian Lamparter chunkeey@gmail.com 2020-05-05T07:42:09+00:00 bda6ebf290fa3bedacb3ba0f32c1fcb38ee5ad55 commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream. This patch follows up on a bug-report by Frank Schäfer that discovered P2P GO wasn't working with wpa_supplicant. This patch removes part of the broken P2P GO support but keeps the vif switchover code in place. Cc: <stable@vger.kernel.org> Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com> Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream.

This patch follows up on a bug-report by Frank Schäfer that
discovered P2P GO wasn't working with wpa_supplicant.
This patch removes part of the broken P2P GO support but
keeps the vif switchover code in place.

Cc: <stable@vger.kernel.org>
Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com>
Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wcn36xx: Fix error handling path in 'wcn36xx_probe()' 2020-06-22T07:31:05+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2020-05-08T02:56:03+00:00 5099a9c22dbfd623922d1d4044e2cc3c4ad9de3d [ Upstream commit a86308fc534edeceaf64670c691e17485436a4f4 ] In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to 'rpmsg_destroy_ept()', as already done in the remove function. Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a86308fc534edeceaf64670c691e17485436a4f4 ]

In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to
'rpmsg_destroy_ept()', as already done in the remove function.

Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
ath10k: Remove msdu from idr when management pkt send fails 2020-06-22T07:31:05+00:00 Rakesh Pillai pillair@codeaurora.org 2020-05-08T02:55:18+00:00 dbf2fab3f54008afa81999cefe7fd092e4f0b937 [ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ] Currently when the sending of any management pkt via wmi command fails, the packet is being unmapped freed in the error handling. But the idr entry added, which is used to track these packet is not getting removed. Hence, during unload, in wmi cleanup, all the entries in IDR are removed and the corresponding buffer is attempted to be freed. This can cause a situation where one packet is attempted to be freed twice. Fix this error by rmeoving the msdu from the idr list when the sending of a management packet over wmi fails. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ]

Currently when the sending of any management pkt
via wmi command fails, the packet is being unmapped
freed in the error handling. But the idr entry added,
which is used to track these packet is not getting removed.

Hence, during unload, in wmi cleanup, all the entries
in IDR are removed and the corresponding buffer is
attempted to be freed. This can cause a situation where
one packet is attempted to be freed twice.

Fix this error by rmeoving the msdu from the idr
list when the sending of a management packet over
wmi fails.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
ath10k: add flush tx packets for SDIO chip 2020-06-22T07:30:59+00:00 Wen Gong wgong@codeaurora.org 2020-04-21T12:09:35+00:00 c5edfe811b4ad37c309ec1eca313e74cb7c7e373 [ Upstream commit dd7fc5545bbafdbd6c1efdc996b61883b285bdc5 ] When station connected to AP, and run TX traffic such as TCP/UDP, and system enter suspend state, then mac80211 call ath10k_flush with set drop flag, recently it only send wmi peer flush to firmware and firmware will flush all pending TX packets, for PCIe, firmware will indicate the TX packets status to ath10k, and then ath10k indicate to mac80211 TX complete with the status, then all the packets has been flushed at this moment. For SDIO chip, it is different, its TX complete indication is disabled by default, and it has a tx queue in ath10k, and its tx credit control is enabled, total tx credit is 96, when its credit is not sufficient, then the packets will buffered in the tx queue of ath10k, max packets is TARGET_TLV_NUM_MSDU_DESC_HL which is 1024, for SDIO, when mac80211 call ath10k_flush with set drop flag, maybe it have pending packets in tx queue of ath10k, and if it does not have sufficient tx credit, the packets will stay in queue untill tx credit report from firmware, if it is a noisy environment, tx speed is low and the tx credit report from firmware will delay more time, then the num_pending_tx will remain > 0 untill all packets send to firmware. After the 1st ath10k_flush, mac80211 will call the 2nd ath10k_flush without set drop flag immediately, then it will call to ath10k_mac_wait_tx_complete, and it wait untill num_pending_tx become to 0, in noisy environment, it is esay to wait about near 5 seconds, then it cause the suspend take long time. 1st and 2nd callstack of ath10k_flush [ 303.740427] ath10k_sdio mmc1:0001:1: ath10k_flush drop:1, pending:0-0 [ 303.740495] ------------[ cut here ]------------ [ 303.740739] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core] [ 303.740757] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer [ 303.740914] kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core] [ 303.741009] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 #2 [ 303.741027] Hardware name: MediaTek krane sku176 board (DT) [ 303.741061] Workqueue: events_unbound async_run_entry_fn [ 303.741086] pstate: 60000005 (nZCv daif -PAN -UAO) [ 303.741166] pc : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.741244] lr : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.741260] sp : ffffffdf080e77a0 [ 303.741276] x29: ffffffdf080e77a0 x28: ffffffdef3730040 [ 303.741300] x27: ffffff907c2240a0 x26: ffffffde6ff39afc [ 303.741321] x25: ffffffdef3730040 x24: ffffff907bf61018 [ 303.741343] x23: ffffff907c2240a0 x22: ffffffde6ff39a50 [ 303.741364] x21: 0000000000000001 x20: ffffffde6ff39a50 [ 303.741385] x19: ffffffde6bac2420 x18: 0000000000017200 [ 303.741407] x17: ffffff907c24a000 x16: 0000000000000037 [ 303.741428] x15: ffffff907b49a568 x14: ffffff907cf332c1 [ 303.741476] x13: 00000000000922e4 x12: 0000000000000000 [ 303.741497] x11: 0000000000000001 x10: 0000000000000007 [ 303.741518] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00 [ 303.741539] x7 : ffffff907ab5e764 x6 : 0000000000000000 [ 303.741560] x5 : 0000000000000080 x4 : 0000000000000001 [ 303.741582] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244 [ 303.741603] x1 : ffffffdf080e74a8 x0 : 0000000000000024 [ 303.741624] Call trace: [ 303.741701] ath10k_flush+0x54/0x104 [ath10k_core] [ 303.741941] __ieee80211_flush_queues+0x1dc/0x358 [mac80211] [ 303.742098] ieee80211_flush_queues+0x34/0x44 [mac80211] [ 303.742253] ieee80211_set_disassoc+0xc0/0x5ec [mac80211] [ 303.742399] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211] [ 303.742535] ieee80211_deauth+0x24/0x30 [mac80211] [ 303.742720] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211] [ 303.742849] cfg80211_mlme_down+0x90/0xd0 [cfg80211] [ 303.742971] cfg80211_disconnect+0x340/0x3a0 [cfg80211] [ 303.743087] __cfg80211_leave+0xe4/0x17c [cfg80211] [ 303.743203] cfg80211_leave+0x38/0x50 [cfg80211] [ 303.743319] wiphy_suspend+0x84/0x5bc [cfg80211] [ 303.743335] dpm_run_callback+0x170/0x304 [ 303.743346] __device_suspend+0x2dc/0x3e8 [ 303.743356] async_suspend+0x2c/0xb0 [ 303.743370] async_run_entry_fn+0x48/0xf8 [ 303.743383] process_one_work+0x304/0x604 [ 303.743394] worker_thread+0x248/0x3f4 [ 303.743403] kthread+0x120/0x130 [ 303.743416] ret_from_fork+0x10/0x18 [ 303.743812] ath10k_sdio mmc1:0001:1: ath10k_flush drop:0, pending:0-0 [ 303.743858] ------------[ cut here ]------------ [ 303.744057] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core] [ 303.744075] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core] [ 303.744256] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 #2 [ 303.744273] Hardware name: MediaTek krane sku176 board (DT) [ 303.744301] Workqueue: events_unbound async_run_entry_fn [ 303.744325] pstate: 60000005 (nZCv daif -PAN -UAO) [ 303.744403] pc : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.744480] lr : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.744496] sp : ffffffdf080e77a0 [ 303.744512] x29: ffffffdf080e77a0 x28: ffffffdef3730040 [ 303.744534] x27: ffffff907c2240a0 x26: ffffffde6ff39afc [ 303.744556] x25: ffffffdef3730040 x24: ffffff907bf61018 [ 303.744577] x23: ffffff907c2240a0 x22: ffffffde6ff39a50 [ 303.744598] x21: 0000000000000000 x20: ffffffde6ff39a50 [ 303.744620] x19: ffffffde6bac2420 x18: 000000000001831c [ 303.744641] x17: ffffff907c24a000 x16: 0000000000000037 [ 303.744662] x15: ffffff907b49a568 x14: ffffff907cf332c1 [ 303.744683] x13: 00000000000922ea x12: 0000000000000000 [ 303.744704] x11: 0000000000000001 x10: 0000000000000007 [ 303.744747] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00 [ 303.744768] x7 : ffffff907ab5e764 x6 : 0000000000000000 [ 303.744789] x5 : 0000000000000080 x4 : 0000000000000001 [ 303.744810] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244 [ 303.744831] x1 : ffffffdf080e74a8 x0 : 0000000000000024 [ 303.744853] Call trace: [ 303.744929] ath10k_flush+0x54/0x104 [ath10k_core] [ 303.745098] __ieee80211_flush_queues+0x1dc/0x358 [mac80211] [ 303.745277] ieee80211_flush_queues+0x34/0x44 [mac80211] [ 303.745424] ieee80211_set_disassoc+0x108/0x5ec [mac80211] [ 303.745569] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211] [ 303.745706] ieee80211_deauth+0x24/0x30 [mac80211] [ 303.745853] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211] [ 303.745979] cfg80211_mlme_down+0x90/0xd0 [cfg80211] [ 303.746103] cfg80211_disconnect+0x340/0x3a0 [cfg80211] [ 303.746219] __cfg80211_leave+0xe4/0x17c [cfg80211] [ 303.746335] cfg80211_leave+0x38/0x50 [cfg80211] [ 303.746452] wiphy_suspend+0x84/0x5bc [cfg80211] [ 303.746467] dpm_run_callback+0x170/0x304 [ 303.746477] __device_suspend+0x2dc/0x3e8 [ 303.746487] async_suspend+0x2c/0xb0 [ 303.746498] async_run_entry_fn+0x48/0xf8 [ 303.746510] process_one_work+0x304/0x604 [ 303.746521] worker_thread+0x248/0x3f4 [ 303.746530] kthread+0x120/0x130 [ 303.746542] ret_from_fork+0x10/0x18 one sample's debugging log: it wait 3190 ms(5000 - 1810). 1st ath10k_flush, it has 120 packets in tx queue of ath10k: <...>-1513 [000] .... 25374.786005: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:1, pending:120-0 <...>-1513 [000] ...1 25374.788375: ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_htt_tx_mgmt_inc_pending htt->num_pending_mgmt_tx:0 <...>-1500 [001] .... 25374.790143: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121 2st ath10k_flush, it has 121 packets in tx queue of ath10k: <...>-1513 [000] .... 25374.790571: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:0, pending:121-0 <...>-1513 [000] .... 25374.791990: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete state:1 pending:121-0 <...>-1508 [001] .... 25374.792696: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:46 <...>-1508 [001] .... 25374.792700: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:46 <...>-1508 [001] .... 25374.792729: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121 <...>-1508 [001] .... 25374.792937: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:88, count:32, len:49792 <...>-1508 [001] .... 25374.793031: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:75, count:14, len:21784 kworker/u16:0-25773 [003] .... 25374.793701: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:46 <...>-1881 [000] .... 25375.073178: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:24 <...>-1881 [000] .... 25375.073182: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:24 <...>-1881 [000] .... 25375.073429: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:75 <...>-1879 [001] .... 25375.074090: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:24 <...>-1881 [000] .... 25375.074123: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:51, count:24, len:37344 <...>-1879 [001] .... 25375.270126: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:26 <...>-1879 [001] .... 25375.270130: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:26 <...>-1488 [000] .... 25375.270174: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:51 <...>-1488 [000] .... 25375.270529: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:25, count:26, len:40456 <...>-1879 [001] .... 25375.270693: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:26 <...>-1488 [001] .... 25377.775885: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:12 <...>-1488 [001] .... 25377.775890: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:12 <...>-1488 [001] .... 25377.775933: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:25 <...>-1488 [001] .... 25377.776059: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:13, count:12, len:18672 <...>-1879 [001] .... 25377.776100: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:12 <...>-1488 [001] .... 25377.878079: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:15 <...>-1488 [001] .... 25377.878087: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:15 <...>-1879 [000] .... 25377.878323: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:13 <...>-1879 [000] .... 25377.878487: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:0, count:13, len:20228 <...>-1879 [000] .... 25377.878497: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:13 <...>-1488 [001] .... 25377.919927: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:11 <...>-1488 [001] .... 25377.919932: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:13 <...>-1488 [001] .... 25377.919976: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:0 <...>-1881 [000] .... 25377.982645: ath10k_log_warn: ath10k_sdio mmc1:0001:1 HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION status:0 <...>-1513 [001] .... 25377.982973: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete time_left:1810, pending:0-0 Flush all pending TX packets for the 1st ath10k_flush reduced the wait time of the 2nd ath10k_flush and then suspend take short time. This Patch only effect SDIO chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200415233730.10581-1-wgong@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dd7fc5545bbafdbd6c1efdc996b61883b285bdc5 ]

When station connected to AP, and run TX traffic such as TCP/UDP, and
system enter suspend state, then mac80211 call ath10k_flush with set
drop flag, recently it only send wmi peer flush to firmware and
firmware will flush all pending TX packets, for PCIe, firmware will
indicate the TX packets status to ath10k, and then ath10k indicate to
mac80211 TX complete with the status, then all the packets has been
flushed at this moment. For SDIO chip, it is different, its TX
complete indication is disabled by default, and it has a tx queue in
ath10k, and its tx credit control is enabled, total tx credit is 96,
when its credit is not sufficient, then the packets will buffered in
the tx queue of ath10k, max packets is TARGET_TLV_NUM_MSDU_DESC_HL
which is 1024, for SDIO, when mac80211 call ath10k_flush with set drop
flag, maybe it have pending packets in tx queue of ath10k, and if it
does not have sufficient tx credit, the packets will stay in queue
untill tx credit report from firmware, if it is a noisy environment,
tx speed is low and the tx credit report from firmware will delay more
time, then the num_pending_tx will remain > 0 untill all packets send
to firmware. After the 1st ath10k_flush, mac80211 will call the 2nd
ath10k_flush without set drop flag immediately, then it will call to
ath10k_mac_wait_tx_complete, and it wait untill num_pending_tx become
to 0, in noisy environment, it is esay to wait about near 5 seconds,
then it cause the suspend take long time.

1st and 2nd callstack of ath10k_flush
[  303.740427] ath10k_sdio mmc1:0001:1: ath10k_flush drop:1, pending:0-0
[  303.740495] ------------[ cut here ]------------
[  303.740739] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[  303.740757] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer
[  303.740914]  kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[  303.741009] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G        W         4.19.95 #2
[  303.741027] Hardware name: MediaTek krane sku176 board (DT)
[  303.741061] Workqueue: events_unbound async_run_entry_fn
[  303.741086] pstate: 60000005 (nZCv daif -PAN -UAO)
[  303.741166] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.741244] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.741260] sp : ffffffdf080e77a0
[  303.741276] x29: ffffffdf080e77a0 x28: ffffffdef3730040
[  303.741300] x27: ffffff907c2240a0 x26: ffffffde6ff39afc
[  303.741321] x25: ffffffdef3730040 x24: ffffff907bf61018
[  303.741343] x23: ffffff907c2240a0 x22: ffffffde6ff39a50
[  303.741364] x21: 0000000000000001 x20: ffffffde6ff39a50
[  303.741385] x19: ffffffde6bac2420 x18: 0000000000017200
[  303.741407] x17: ffffff907c24a000 x16: 0000000000000037
[  303.741428] x15: ffffff907b49a568 x14: ffffff907cf332c1
[  303.741476] x13: 00000000000922e4 x12: 0000000000000000
[  303.741497] x11: 0000000000000001 x10: 0000000000000007
[  303.741518] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00
[  303.741539] x7 : ffffff907ab5e764 x6 : 0000000000000000
[  303.741560] x5 : 0000000000000080 x4 : 0000000000000001
[  303.741582] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244
[  303.741603] x1 : ffffffdf080e74a8 x0 : 0000000000000024
[  303.741624] Call trace:
[  303.741701]  ath10k_flush+0x54/0x104 [ath10k_core]
[  303.741941]  __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[  303.742098]  ieee80211_flush_queues+0x34/0x44 [mac80211]
[  303.742253]  ieee80211_set_disassoc+0xc0/0x5ec [mac80211]
[  303.742399]  ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[  303.742535]  ieee80211_deauth+0x24/0x30 [mac80211]
[  303.742720]  cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[  303.742849]  cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[  303.742971]  cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[  303.743087]  __cfg80211_leave+0xe4/0x17c [cfg80211]
[  303.743203]  cfg80211_leave+0x38/0x50 [cfg80211]
[  303.743319]  wiphy_suspend+0x84/0x5bc [cfg80211]
[  303.743335]  dpm_run_callback+0x170/0x304
[  303.743346]  __device_suspend+0x2dc/0x3e8
[  303.743356]  async_suspend+0x2c/0xb0
[  303.743370]  async_run_entry_fn+0x48/0xf8
[  303.743383]  process_one_work+0x304/0x604
[  303.743394]  worker_thread+0x248/0x3f4
[  303.743403]  kthread+0x120/0x130
[  303.743416]  ret_from_fork+0x10/0x18

[  303.743812] ath10k_sdio mmc1:0001:1: ath10k_flush drop:0, pending:0-0
[  303.743858] ------------[ cut here ]------------
[  303.744057] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[  303.744075] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[  303.744256] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G        W         4.19.95 #2
[  303.744273] Hardware name: MediaTek krane sku176 board (DT)
[  303.744301] Workqueue: events_unbound async_run_entry_fn
[  303.744325] pstate: 60000005 (nZCv daif -PAN -UAO)
[  303.744403] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.744480] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[  303.744496] sp : ffffffdf080e77a0
[  303.744512] x29: ffffffdf080e77a0 x28: ffffffdef3730040
[  303.744534] x27: ffffff907c2240a0 x26: ffffffde6ff39afc
[  303.744556] x25: ffffffdef3730040 x24: ffffff907bf61018
[  303.744577] x23: ffffff907c2240a0 x22: ffffffde6ff39a50
[  303.744598] x21: 0000000000000000 x20: ffffffde6ff39a50
[  303.744620] x19: ffffffde6bac2420 x18: 000000000001831c
[  303.744641] x17: ffffff907c24a000 x16: 0000000000000037
[  303.744662] x15: ffffff907b49a568 x14: ffffff907cf332c1
[  303.744683] x13: 00000000000922ea x12: 0000000000000000
[  303.744704] x11: 0000000000000001 x10: 0000000000000007
[  303.744747] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00
[  303.744768] x7 : ffffff907ab5e764 x6 : 0000000000000000
[  303.744789] x5 : 0000000000000080 x4 : 0000000000000001
[  303.744810] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244
[  303.744831] x1 : ffffffdf080e74a8 x0 : 0000000000000024
[  303.744853] Call trace:
[  303.744929]  ath10k_flush+0x54/0x104 [ath10k_core]
[  303.745098]  __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[  303.745277]  ieee80211_flush_queues+0x34/0x44 [mac80211]
[  303.745424]  ieee80211_set_disassoc+0x108/0x5ec [mac80211]
[  303.745569]  ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[  303.745706]  ieee80211_deauth+0x24/0x30 [mac80211]
[  303.745853]  cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[  303.745979]  cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[  303.746103]  cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[  303.746219]  __cfg80211_leave+0xe4/0x17c [cfg80211]
[  303.746335]  cfg80211_leave+0x38/0x50 [cfg80211]
[  303.746452]  wiphy_suspend+0x84/0x5bc [cfg80211]
[  303.746467]  dpm_run_callback+0x170/0x304
[  303.746477]  __device_suspend+0x2dc/0x3e8
[  303.746487]  async_suspend+0x2c/0xb0
[  303.746498]  async_run_entry_fn+0x48/0xf8
[  303.746510]  process_one_work+0x304/0x604
[  303.746521]  worker_thread+0x248/0x3f4
[  303.746530]  kthread+0x120/0x130
[  303.746542]  ret_from_fork+0x10/0x18

one sample's debugging log: it wait 3190 ms(5000 - 1810).

1st ath10k_flush, it has 120 packets in tx queue of ath10k:
<...>-1513  [000] .... 25374.786005: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:1, pending:120-0
<...>-1513  [000] ...1 25374.788375: ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_htt_tx_mgmt_inc_pending htt->num_pending_mgmt_tx:0
<...>-1500  [001] .... 25374.790143: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121

2st ath10k_flush, it has 121 packets in tx queue of ath10k:
<...>-1513  [000] .... 25374.790571: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:0, pending:121-0
<...>-1513  [000] .... 25374.791990: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete state:1 pending:121-0
<...>-1508  [001] .... 25374.792696: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:46
<...>-1508  [001] .... 25374.792700: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:46
<...>-1508  [001] .... 25374.792729: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121
<...>-1508  [001] .... 25374.792937: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:88, count:32, len:49792
<...>-1508  [001] .... 25374.793031: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:75, count:14, len:21784
kworker/u16:0-25773 [003] .... 25374.793701: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:46
<...>-1881  [000] .... 25375.073178: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:24
<...>-1881  [000] .... 25375.073182: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:24
<...>-1881  [000] .... 25375.073429: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:75
<...>-1879  [001] .... 25375.074090: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:24
<...>-1881  [000] .... 25375.074123: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:51, count:24, len:37344
<...>-1879  [001] .... 25375.270126: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:26
<...>-1879  [001] .... 25375.270130: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:26
<...>-1488  [000] .... 25375.270174: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:51
<...>-1488  [000] .... 25375.270529: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:25, count:26, len:40456
<...>-1879  [001] .... 25375.270693: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:26
<...>-1488  [001] .... 25377.775885: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:12
<...>-1488  [001] .... 25377.775890: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:12
<...>-1488  [001] .... 25377.775933: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:25
<...>-1488  [001] .... 25377.776059: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:13, count:12, len:18672
<...>-1879  [001] .... 25377.776100: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:12
<...>-1488  [001] .... 25377.878079: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:15
<...>-1488  [001] .... 25377.878087: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:15
<...>-1879  [000] .... 25377.878323: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:13
<...>-1879  [000] .... 25377.878487: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:0, count:13, len:20228
<...>-1879  [000] .... 25377.878497: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:13
<...>-1488  [001] .... 25377.919927: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:11
<...>-1488  [001] .... 25377.919932: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:13
<...>-1488  [001] .... 25377.919976: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:0
<...>-1881  [000] .... 25377.982645: ath10k_log_warn: ath10k_sdio mmc1:0001:1 HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION status:0
<...>-1513  [001] .... 25377.982973: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete time_left:1810, pending:0-0

Flush all pending TX packets for the 1st ath10k_flush reduced the wait
time of the 2nd ath10k_flush and then suspend take short time.

This Patch only effect SDIO chips.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200415233730.10581-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>