linux.git/drivers/net/wireless/cisco, branch v4.9.242

airo: Fix read overflows sending packets

2020-06-11T07:22:21+00:00

commit 11e7a91994c29da96d847f676be023da6a2c1359 upstream.

The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from
skb->data even when skb->len is less than ETH_ZLEN so it leads to a read
overflow.

The fix is to pad skb->data to at least ETH_ZLEN bytes.

Cc: 
Reported-by: Hu Jiahui 
Signed-off-by: Dan Carpenter 
Reviewed-by: Eric Dumazet 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwanda
Signed-off-by: Greg Kroah-Hartman

airo: Add missing CAP_NET_ADMIN check in AIROOLDIOCTL/SIOCDEVPRIVATE

2020-02-05T13:05:52+00:00

[ Upstream commit 78f7a7566f5eb59321e99b55a6fdb16ea05b37d1 ]

The driver for Cisco Aironet 4500 and 4800 series cards (airo.c),
implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().

The ioctl handler copies an aironet_ioctl struct from userspace, which
includes a command. Some of the commands are handled in readrids(),
where the user controlled command is converted into a driver-internal
value called "ridcode".

There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which
correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM
respectively. These commands both have checks that the user has
CAP_NET_ADMIN, with the comment that "Only super-user can read WEP
keys", otherwise they return -EPERM.

However there is another command value, AIRORRID, that lets the user
specify the ridcode value directly, with no other checks. This means
the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and
AIROGWEPKNV.

Fix it by moving the CAP_NET_ADMIN check out of the command handling
and instead do it later based on the ridcode. That way regardless of
whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed
in using AIRORID, we always do the CAP_NET_ADMIN check.

Found by Ilja by code inspection, not tested as I don't have the
required hardware.

Reported-by: Ilja Van Sprundel 
Signed-off-by: Michael Ellerman 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

airo: Fix possible info leak in AIROOLDIOCTL/SIOCDEVPRIVATE

2020-02-05T13:05:52+00:00

[ Upstream commit d6bce2137f5d6bb1093e96d2f801479099b28094 ]

The driver for Cisco Aironet 4500 and 4800 series cards (airo.c),
implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().

The ioctl handler copies an aironet_ioctl struct from userspace, which
includes a command and a length. Some of the commands are handled in
readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes.

That buffer is then passed to PC4500_readrid(), which has two cases.
The else case does some setup and then reads up to RIDSIZE bytes from
the hardware into the kmalloc()'ed buffer.

Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer:

	// read the rid length field
	bap_read(ai, pBuf, 2, BAP1);
	// length for remaining part of rid
	len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2;
	...
	// read remainder of the rid
	rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1);

PC4500_readrid() then returns to readrids() which does:

	len = comp->len;
	if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) {

Where comp->len is the user controlled length field.

So if the "rid length field" returned by the hardware is < 2048, and
the user requests 2048 bytes in comp->len, we will leak the previous
contents of the kmalloc()'ed buffer to userspace.

Fix it by kzalloc()'ing the buffer.

Found by Ilja by code inspection, not tested as I don't have the
required hardware.

Reported-by: Ilja Van Sprundel 
Signed-off-by: Michael Ellerman 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

wireless: airo: potential buffer overflow in sprintf()

2019-11-28T17:28:57+00:00

[ Upstream commit 3d39e1bb1c88f32820c5f9271f2c8c2fb9a52bac ]

It looks like we wanted to print a maximum of BSSList_rid.ssidLen bytes
of the ssid, but we accidentally use "%*s" (width) instead of "%.*s"
(precision) so if the ssid doesn't have a NUL terminator this could lead
to an overflow.

Static analysis.  Not tested.

Fixes: e174961ca1a0 ("net: convert print_mac to %pM")
Signed-off-by: Dan Carpenter 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

wireless: airo: rename 'register' variable

2016-06-29T15:56:20+00:00

'register' is a keyword in C and cannot be used in place of a
variable name, as shown by this -Wextra warning:

drivers/net/wireless/cisco/airo.c:1105:29: error: 'register' is not at beginning of declaration [-Werror=old-style-declaration]

This replaces the 'register' keyword with a 'reg' identifier in
the declaration, which matches the definition and has the intended
meaning.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Kalle Valo

Merge tag 'wireless-drivers-next-for-davem-2016-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

2016-05-20T23:40:35+00:00

Kalle Valo says:

====================
wireless-drivers patches for 4.7

Major changes:

iwlwifi

* remove IWLWIFI_DEBUG_EXPERIMENTAL_UCODE kconfig option
* work for RX multiqueue continues
* dynamic queue allocation work continues
* add Luca as maintainer
* a bunch of fixes and improvements all over

brcmfmac

* add 4356 sdio support

ath6kl

* add ability to set debug uart baud rate with a module parameter

wil6210

* add debugfs file to configure firmware led functionality
====================

Signed-off-by: David S. Miller

airo: prevent potential underflow in airo_set_freq()

2016-05-11T19:01:38+00:00

I'm not sure if this can underflow but Smatch complains.  It seems
harmless to add a check for negatives.

Signed-off-by: Dan Carpenter 
Signed-off-by: Kalle Valo

treewide: replace dev->trans_start update with helper

2016-05-04T18:16:49+00:00

Replace all trans_start updates with netif_trans_update helper.
change was done via spatch:

struct net_device *d;
@@
- d->trans_start = jiffies
+ netif_trans_update(d)

Compile tested only.

Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Florian Westphal 
Acked-by: Felipe Balbi 
Acked-by: Mugunthan V N 
Acked-by: Antonio Quartulli 
Signed-off-by: David S. Miller

cfg80211: remove enum ieee80211_band

2016-04-12T13:56:15+00:00

This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.

Signed-off-by: Johannes Berg

wireless: airo: re-use mac_pton()

2015-11-30T12:59:28+00:00

mac_pton() converts 6-byte MAC / BSSID to binary format. Change an open coded
variant by the generic one.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Kalle Valo