linux.git/drivers/net/wireless/intersil, branch v4.9.242 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git p54: avoid accessing the data mapped to streaming DMA 2020-11-10T09:23:51+00:00 Jia-Ju Bai baijiaju@tsinghua.edu.cn 2020-08-02T13:29:49+00:00 ad3394d7f62b30afb824116a07dfe7b1b9900c85 commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream. In p54p_tx(), skb->data is mapped to streaming DMA on line 337: mapping = pci_map_single(..., skb->data, ...); Then skb->data is accessed on line 349: desc->device_addr = ((struct p54_hdr *)skb->data)->req_id; This access may cause data inconsistency between CPU cache and hardware. To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in a local variable before DMA mapping, and then the driver accesses this local variable instead of skb->data. Cc: <stable@vger.kernel.org> Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream.

In p54p_tx(), skb->data is mapped to streaming DMA on line 337:
  mapping = pci_map_single(..., skb->data, ...);

Then skb->data is accessed on line 349:
  desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;

This access may cause data inconsistency between CPU cache and hardware.

To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in
a local variable before DMA mapping, and then the driver accesses this
local variable instead of skb->data.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p54usb: add AirVasT USB stick device-id 2020-06-11T07:22:20+00:00 Giuseppe Marco Randazzo gmrandazzo@gmail.com 2020-04-05T22:06:59+00:00 5ac8ff17970490105f23f32074306518beab67b0 commit 63e49a9fdac1b4e97ac26cb3fe953f210d83bc53 upstream. This patch adds the AirVasT USB wireless devices 124a:4026 to the list of supported devices. It's using the ISL3886 usb firmware. Without this modification, the wiki adapter is not recognized. Cc: <stable@vger.kernel.org> Signed-off-by: Giuseppe Marco Randazzo <gmrandazzo@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200405220659.45621-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 63e49a9fdac1b4e97ac26cb3fe953f210d83bc53 upstream.

This patch adds the AirVasT USB wireless devices 124a:4026
to the list of supported devices. It's using the ISL3886
usb firmware. Without this modification, the wiki adapter
is not recognized.

Cc: <stable@vger.kernel.org>
Signed-off-by: Giuseppe Marco Randazzo <gmrandazzo@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200405220659.45621-1-chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hostap: Adjust indentation in prism2_hostapd_add_sta 2020-02-28T14:42:38+00:00 Nathan Chancellor natechancellor@gmail.com 2019-12-18T01:15:46+00:00 5dc3a54d0deab4ea01c7693baa666a81f50e22d4 [ Upstream commit b61156fba74f659d0bc2de8f2dbf5bad9f4b8faf ] Clang warns: ../drivers/net/wireless/intersil/hostap/hostap_ap.c:2511:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (sta->tx_supp_rates & WLAN_RATE_5M5) ^ ../drivers/net/wireless/intersil/hostap/hostap_ap.c:2509:2: note: previous statement is here if (sta->tx_supp_rates & WLAN_RATE_2M) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: ff1d2767d5a4 ("Add HostAP wireless driver.") Link: https://github.com/ClangBuiltLinux/linux/issues/813 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b61156fba74f659d0bc2de8f2dbf5bad9f4b8faf ]

Clang warns:

../drivers/net/wireless/intersil/hostap/hostap_ap.c:2511:3: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        if (sta->tx_supp_rates & WLAN_RATE_5M5)
        ^
../drivers/net/wireless/intersil/hostap/hostap_ap.c:2509:2: note:
previous statement is here
        if (sta->tx_supp_rates & WLAN_RATE_2M)
        ^
1 warning generated.

This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: ff1d2767d5a4 ("Add HostAP wireless driver.")
Link: https://github.com/ClangBuiltLinux/linux/issues/813
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
orinoco: avoid assertion in case of NULL pointer 2020-02-28T14:42:26+00:00 Aditya Pakki pakki001@umn.edu 2019-12-15T19:58:58+00:00 5704974eb30050cd1758b5ab280d04cb56651596 [ Upstream commit c705f9fc6a1736dcf6ec01f8206707c108dca824 ] In ezusb_init, if upriv is NULL, the code crashes. However, the caller in ezusb_probe can handle the error and print the failure message. The patch replaces the BUG_ON call to error return. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c705f9fc6a1736dcf6ec01f8206707c108dca824 ]

In ezusb_init, if upriv is NULL, the code crashes. However, the caller
in ezusb_probe can handle the error and print the failure message.
The patch replaces the BUG_ON call to error return.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
orinoco_usb: fix interface sanity check 2020-02-05T13:05:34+00:00 Johan Hovold johan@kernel.org 2019-12-10T11:44:23+00:00 b6efe27457170867ae3163c36d41f71b08fb3af5 commit b73e05aa543cf8db4f4927e36952360d71291d41 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 9afac70a7305 ("orinoco: add orinoco_usb driver") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b73e05aa543cf8db4f4927e36952360d71291d41 upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 9afac70a7305 ("orinoco: add orinoco_usb driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.35
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p54usb: Fix race between disconnect and firmware loading 2019-07-21T07:06:01+00:00 Alan Stern stern@rowland.harvard.edu 2019-05-20T14:44:21+00:00 feca0ce34518f69447d0d13cd431d0eef647a794 commit 6e41e2257f1094acc37618bf6c856115374c6922 upstream. The syzbot fuzzer found a bug in the p54 USB wireless driver. The issue involves a race between disconnect and the firmware-loader callback routine, and it has several aspects. One big problem is that when the firmware can't be loaded, the callback routine tries to unbind the driver from the USB _device_ (by calling device_release_driver) instead of from the USB _interface_ to which it is actually bound (by calling usb_driver_release_interface). The race involves access to the private data structure. The driver's disconnect handler waits for a completion that is signalled by the firmware-loader callback routine. As soon as the completion is signalled, you have to assume that the private data structure may have been deallocated by the disconnect handler -- even if the firmware was loaded without errors. However, the callback routine does access the private data several times after that point. Another problem is that, in order to ensure that the USB device structure hasn't been freed when the callback routine runs, the driver takes a reference to it. This isn't good enough any more, because now that the callback routine calls usb_driver_release_interface, it has to ensure that the interface structure hasn't been freed. Finally, the driver takes an unnecessary reference to the USB device structure in the probe function and drops the reference in the disconnect handler. This extra reference doesn't accomplish anything, because the USB core already guarantees that a device structure won't be deallocated while a driver is still bound to any of its interfaces. To fix these problems, this patch makes the following changes: Call usb_driver_release_interface() rather than device_release_driver(). Don't signal the completion until after the important information has been copied out of the private data structure, and don't refer to the private data at all thereafter. Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. During the firmware loading process, take a reference to the USB interface instead of the USB device. Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6e41e2257f1094acc37618bf6c856115374c6922 upstream.

The syzbot fuzzer found a bug in the p54 USB wireless driver.  The
issue involves a race between disconnect and the firmware-loader
callback routine, and it has several aspects.

One big problem is that when the firmware can't be loaded, the
callback routine tries to unbind the driver from the USB _device_ (by
calling device_release_driver) instead of from the USB _interface_ to
which it is actually bound (by calling usb_driver_release_interface).

The race involves access to the private data structure.  The driver's
disconnect handler waits for a completion that is signalled by the
firmware-loader callback routine.  As soon as the completion is
signalled, you have to assume that the private data structure may have
been deallocated by the disconnect handler -- even if the firmware was
loaded without errors.  However, the callback routine does access the
private data several times after that point.

Another problem is that, in order to ensure that the USB device
structure hasn't been freed when the callback routine runs, the driver
takes a reference to it.  This isn't good enough any more, because now
that the callback routine calls usb_driver_release_interface, it has
to ensure that the interface structure hasn't been freed.

Finally, the driver takes an unnecessary reference to the USB device
structure in the probe function and drops the reference in the
disconnect handler.  This extra reference doesn't accomplish anything,
because the USB core already guarantees that a device structure won't
be deallocated while a driver is still bound to any of its interfaces.

To fix these problems, this patch makes the following changes:

	Call usb_driver_release_interface() rather than
	device_release_driver().

	Don't signal the completion until after the important
	information has been copied out of the private data structure,
	and don't refer to the private data at all thereafter.

	Lock udev (the interface's parent) before unbinding the driver
	instead of locking udev->parent.

	During the firmware loading process, take a reference to the
	USB interface instead of the USB device.

	Don't take an unnecessary reference to the device during probe
	(and then don't drop it during disconnect).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p54: drop device reference count if fails to enable device 2019-05-25T16:26:46+00:00 Pan Bian bianpan2016@163.com 2019-04-17T09:41:23+00:00 224354c0a492fac1ecb01a685b139417ab242ca3 commit 8149069db81853570a665f5e5648c0e526dc0e43 upstream. The function p54p_probe takes an extra reference count of the PCI device. However, the extra reference count is not dropped when it fails to enable the PCI device. This patch fixes the bug. Cc: stable@vger.kernel.org Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8149069db81853570a665f5e5648c0e526dc0e43 upstream.

The function p54p_probe takes an extra reference count of the PCI
device. However, the extra reference count is not dropped when it fails
to enable the PCI device. This patch fixes the bug.

Cc: stable@vger.kernel.org
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p54: don't unregister leds when they are not initialized 2017-11-30T08:39:06+00:00 Andrey Konovalov andreyknvl@google.com 2017-09-26T15:11:33+00:00 7d159bf2afcfed2ca2557180e1166bc88f41fb06 commit fc09785de0a364427a5df63d703bae9a306ed116 upstream. ieee80211_register_hw() in p54_register_common() may fail and leds won't get initialized. Currently p54_unregister_common() doesn't check that and always calls p54_unregister_leds(). The fix is to check priv->registered flag before calling p54_unregister_leds(). Found by syzkaller. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 1404 Comm: kworker/1:1 Not tainted 4.14.0-rc1-42251-gebb2c2437d80-dirty #205 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769 __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385 lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002 flush_work+0xf0/0x8c0 kernel/workqueue.c:2886 __cancel_work_timer+0x51d/0x870 kernel/workqueue.c:2961 cancel_delayed_work_sync+0x1f/0x30 kernel/workqueue.c:3081 p54_unregister_leds+0x6c/0xc0 drivers/net/wireless/intersil/p54/led.c:160 p54_unregister_common+0x3d/0xb0 drivers/net/wireless/intersil/p54/main.c:856 p54u_disconnect+0x86/0x120 drivers/net/wireless/intersil/p54/p54usb.c:1073 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423 __device_release_driver drivers/base/dd.c:861 device_release_driver_internal+0x4f4/0x5c0 drivers/base/dd.c:893 device_release_driver+0x1e/0x30 drivers/base/dd.c:918 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565 device_del+0x5c4/0xab0 drivers/base/core.c:1985 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124 hub_port_connect drivers/usb/core/hub.c:4754 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 process_scheduled_works kernel/workqueue.c:2179 worker_thread+0xb2b/0x1850 kernel/workqueue.c:2255 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc09785de0a364427a5df63d703bae9a306ed116 upstream.

ieee80211_register_hw() in p54_register_common() may fail and leds won't
get initialized. Currently p54_unregister_common() doesn't check that and
always calls p54_unregister_leds(). The fix is to check priv->registered
flag before calling p54_unregister_leds().

Found by syzkaller.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1404 Comm: kworker/1:1 Not tainted
4.14.0-rc1-42251-gebb2c2437d80-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x292/0x395 lib/dump_stack.c:52
 register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
 __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
 lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
 flush_work+0xf0/0x8c0 kernel/workqueue.c:2886
 __cancel_work_timer+0x51d/0x870 kernel/workqueue.c:2961
 cancel_delayed_work_sync+0x1f/0x30 kernel/workqueue.c:3081
 p54_unregister_leds+0x6c/0xc0 drivers/net/wireless/intersil/p54/led.c:160
 p54_unregister_common+0x3d/0xb0 drivers/net/wireless/intersil/p54/main.c:856
 p54u_disconnect+0x86/0x120 drivers/net/wireless/intersil/p54/p54usb.c:1073
 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
 __device_release_driver drivers/base/dd.c:861
 device_release_driver_internal+0x4f4/0x5c0 drivers/base/dd.c:893
 device_release_driver+0x1e/0x30 drivers/base/dd.c:918
 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
 device_del+0x5c4/0xab0 drivers/base/core.c:1985
 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
 hub_port_connect drivers/usb/core/hub.c:4754
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
 process_scheduled_works kernel/workqueue.c:2179
 worker_thread+0xb2b/0x1850 kernel/workqueue.c:2255
 kthread+0x3a1/0x470 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p54: memset(0) whole array 2017-09-02T05:07:53+00:00 Jiri Slaby jslaby@suse.cz 2016-10-14T09:23:09+00:00 f71996c3ce5d3b7ee0f581f6c2c37a19d50d72e8 commit 6f17581788206444cbbcdbc107498f85e9765e3d upstream. gcc 7 complains: drivers/net/wireless/intersil/p54/fwio.c: In function 'p54_scan': drivers/net/wireless/intersil/p54/fwio.c:491:4: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] Fix that by passing the correct size to memset. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6f17581788206444cbbcdbc107498f85e9765e3d upstream.

gcc 7 complains:
drivers/net/wireless/intersil/p54/fwio.c: In function 'p54_scan':
drivers/net/wireless/intersil/p54/fwio.c:491:4: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]

Fix that by passing the correct size to memset.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
orinoco: Use shash instead of ahash for MIC calculations 2017-01-19T19:18:03+00:00 Andrew Lutomirski luto@kernel.org 2016-12-12T20:55:55+00:00 4a940d6503e1ac6c6ba235a8f4c9b4fd61934fee commit 570b90fa230b8021f51a67fab2245fe8df6fe37d upstream. Eric Biggers pointed out that the orinoco driver pointed scatterlists at the stack. Fix it by switching from ahash to shash. The result should be simpler, faster, and more correct. kvalo: cherry picked from commit 1fef293b8a9850cfa124a53c1d8878d355010403 as I accidentally applied this patch to wireless-drivers-next when I was supposed to apply this wireless-drivers Reported-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 570b90fa230b8021f51a67fab2245fe8df6fe37d upstream.

Eric Biggers pointed out that the orinoco driver pointed scatterlists
at the stack.

Fix it by switching from ahash to shash.  The result should be
simpler, faster, and more correct.

kvalo: cherry picked from commit 1fef293b8a9850cfa124a53c1d8878d355010403 as I
accidentally applied this patch to wireless-drivers-next when I was supposed to
apply this wireless-drivers

Reported-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>