linux.git/drivers/net/wireless, branch v6.12.81

wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free

2026-04-11T12:24:51+00:00

commit 789b06f9f39cdc7e895bdab2c034e39c41c8f8d6 upstream.

Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for
the virt_wifi net devices. However, unregistering a virt_wifi device in
netdev_run_todo() can happen together with the device referenced by
SET_NETDEV_DEV().

It can result in use-after-free during the ethtool operations performed
on a virt_wifi device that is currently being unregistered. Such a net
device can have the `dev.parent` field pointing to the freed memory,
but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`.

Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this:

 ==================================================================
 BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0
 Read of size 2 at addr ffff88810cfc46f8 by task pm/606

 Call Trace:
  
  dump_stack_lvl+0x4d/0x70
  print_report+0x170/0x4f3
  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
  kasan_report+0xda/0x110
  ? __pm_runtime_resume+0xe2/0xf0
  ? __pm_runtime_resume+0xe2/0xf0
  __pm_runtime_resume+0xe2/0xf0
  ethnl_ops_begin+0x49/0x270
  ethnl_set_features+0x23c/0xab0
  ? __pfx_ethnl_set_features+0x10/0x10
  ? kvm_sched_clock_read+0x11/0x20
  ? local_clock_noinstr+0xf/0xf0
  ? local_clock+0x10/0x30
  ? kasan_save_track+0x25/0x60
  ? __kasan_kmalloc+0x7f/0x90
  ? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0
  genl_family_rcv_msg_doit+0x1e7/0x2c0
  ? __pfx_genl_family_rcv_msg_doit+0x10/0x10
  ? __pfx_cred_has_capability.isra.0+0x10/0x10
  ? stack_trace_save+0x8e/0xc0
  genl_rcv_msg+0x411/0x660
  ? __pfx_genl_rcv_msg+0x10/0x10
  ? __pfx_ethnl_set_features+0x10/0x10
  netlink_rcv_skb+0x121/0x380
  ? __pfx_genl_rcv_msg+0x10/0x10
  ? __pfx_netlink_rcv_skb+0x10/0x10
  ? __pfx_down_read+0x10/0x10
  genl_rcv+0x23/0x30
  netlink_unicast+0x60f/0x830
  ? __pfx_netlink_unicast+0x10/0x10
  ? __pfx___alloc_skb+0x10/0x10
  netlink_sendmsg+0x6ea/0xbc0
  ? __pfx_netlink_sendmsg+0x10/0x10
  ? __futex_queue+0x10b/0x1f0
  ____sys_sendmsg+0x7a2/0x950
  ? copy_msghdr_from_user+0x26b/0x430
  ? __pfx_____sys_sendmsg+0x10/0x10
  ? __pfx_copy_msghdr_from_user+0x10/0x10
  ___sys_sendmsg+0xf8/0x180
  ? __pfx____sys_sendmsg+0x10/0x10
  ? __pfx_futex_wait+0x10/0x10
  ? fdget+0x2e4/0x4a0
  __sys_sendmsg+0x11f/0x1c0
  ? __pfx___sys_sendmsg+0x10/0x10
  do_syscall_64+0xe2/0x570
  ? exc_page_fault+0x66/0xb0
  entry_SYSCALL_64_after_hwframe+0x77/0x7f
  

This fix may be combined with another one in the ethtool subsystem:
https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u

Fixes: d43c65b05b848e0b ("ethtool: runtime-resume netdev parent in ethnl_ops_begin")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Popov 
Acked-by: Greg Kroah-Hartman 
Reviewed-by: Breno Leitao 
Link: https://patch.msgid.link/20260324224607.374327-1-alex.popov@linux.com
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler()

2026-04-11T12:24:40+00:00

commit 744fabc338e87b95c4d1ff7c95bc8c0f834c6d99 upstream.

The memcpy function assumes the dynamic array notif->matches is at least
as large as the number of bytes to copy. Otherwise, results->matches may
contain unwanted data. To guarantee safety, extend the validation in one
of the checks to ensure sufficient packet length.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Cc: stable@vger.kernel.org
Fixes: 5ac54afd4d97 ("wifi: iwlwifi: mvm: Add handling for scan offload match info notification")
Signed-off-by: Alexey Velichayshiy 
Link: https://patch.msgid.link/20260207150335.1013646-1-a.velichayshiy@ispras.ru
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation

2026-04-11T12:24:39+00:00

commit d049e56b1739101d1c4d81deedb269c52a8dbba0 upstream.

The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.

This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.

Widen valuesize from u8 to u32 to accommodate the full range.

Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Yasuaki Torimaru 
Link: https://patch.msgid.link/20260324100624.983458-1-yasuakitorimaru@gmail.com
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wifi: ath11k: Pass the correct value of each TID during a stop AMPDU session

2026-04-11T12:24:30+00:00

[ Upstream commit e225b36f83d7926c1f2035923bb0359d851fdb73 ]

During ongoing traffic, a request to stop an AMPDU session
for one TID could incorrectly affect other active sessions.
This can happen because an incorrect TID reference would be
passed when updating the BA session state, causing the wrong
session to be stopped. As a result, the affected session would
be reduced to a minimal BA size, leading to a noticeable
throughput degradation.

Fix this issue by passing the correct argument from
ath11k_dp_rx_ampdu_stop() to ath11k_peer_rx_tid_reo_update()
during a stop AMPDU session. Instead of passing peer->tx_tid, which
is the base address of the array, corresponding to TID 0; pass
the value of &peer->rx_tid[params->tid], where the different TID numbers
are accounted for.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1

Fixes: d5c65159f2895 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Reshma Immaculate Rajkumar 
Reviewed-by: Baochen Qiang 
Reviewed-by: Vasanthakumar Thiagarajan 
Link: https://patch.msgid.link/20260319065608.2408179-1-reshma.rajkumar@oss.qualcomm.com
Signed-off-by: Jeff Johnson 
Signed-off-by: Sasha Levin

wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom

2026-03-25T10:08:54+00:00

[ Upstream commit deb353d9bb009638b7762cae2d0b6e8fdbb41a69 ]

Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.

Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.

The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.

Assisted-by: Gemini:gemini-3.1-pro
Fixes: e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push")
Cc: Peter Astrand 
Signed-off-by: Guenter Roeck 
Link: https://patch.msgid.link/20260318064636.3065925-1-linux@roeck-us.net
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: libertas: fix use-after-free in lbs_free_adapter()

2026-03-25T10:08:40+00:00

[ Upstream commit 03cc8f90d0537fcd4985c3319b4fafbf2e3fb1f0 ]

The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.

If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.

Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.

Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.

This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written.

Fixes: 8f641d93c38a ("libertas: detect TX lockups and reset hardware")
Fixes: 954ee164f4f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges 
Link: https://patch.msgid.link/20260206195356.15647-1-git@danielhodges.dev
Signed-off-by: Johannes Berg 
[ del_timer() => timer_delete_sync() ]
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()

2026-03-13T16:20:42+00:00

[ Upstream commit 4e10a730d1b511ff49723371ed6d694dd1b2c785 ]

Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.

Fixes: 577dbc6c656d ("mt76: mt7915: enable offloading of sequence number assignment")
Signed-off-by: Lorenzo Bianconi 
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-3-b0f6d1ad4850@kernel.org
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag]
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()

2026-03-13T16:20:42+00:00

[ Upstream commit c41a9abd6ae31d130e8f332e7c8800c4c866234b ]

Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.

Fixes: c948b5da6bbec ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Lorenzo Bianconi 
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-2-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()

2026-03-13T16:20:41+00:00

[ Upstream commit 60862846308627e9e15546bb647a00de44deb27b ]

Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.

Fixes: 98686cd21624c ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi 
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-1-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin

wifi: wlcore: Fix a locking bug

2026-03-13T16:20:41+00:00

[ Upstream commit 72c6df8f284b3a49812ce2ac136727ace70acc7c ]

Make sure that wl->mutex is locked before it is unlocked. This has been
detected by the Clang thread-safety analyzer.

Fixes: 45aa7f071b06 ("wlcore: Use generic runtime pm calls for wowlan elp configuration")
Signed-off-by: Bart Van Assche 
Link: https://patch.msgid.link/20260223220102.2158611-26-bart.vanassche@linux.dev
Signed-off-by: Johannes Berg 
Signed-off-by: Sasha Levin