linux.git/drivers/net, branch v5.4.63

net: gianfar: Add of_node_put() before goto statement

2020-09-03T09:27:00+00:00

[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ]

Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.

Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.

Issue found with Coccinelle.

Signed-off-by: Sumera Priyadarsini 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

macvlan: validate setting of multiple remote source MAC addresses

2020-09-03T09:27:00+00:00

[ Upstream commit 8b61fba503904acae24aeb2bd5569b4d6544d48f ]

Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.

iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:

 # ip link add link eth0 name macvlan0 type macvlan mode source
 # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
 RTNETLINK answers: Cannot assign requested address
 # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
 # ip -d link show macvlan0
 5: macvlan0@eth0:  mtu 1500 ...
     link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
     macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...

With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.

Signed-off-by: Alvin Šipraga 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

scsi: fcoe: Fix I/O path allocation

2020-09-03T09:26:59+00:00

[ Upstream commit fa39ab5184d64563cd36f2fb5f0d3fbad83a432c ]

ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called
with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of
GFP_KERNEL.

Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie@oracle.com
cc: Hannes Reinecke 
Reviewed-by: Lee Duncan 
Signed-off-by: Mike Christie 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Sasha Levin

Revert "ath10k: fix DMA related firmware crashes on multiple devices"

2020-09-03T09:26:49+00:00

[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ]

This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e.
PCIe hung issue was observed on multiple platforms. The issue was reproduced
when DUT was configured as AP and associated with 50+ STAs.

For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size
of the RD/WR access to the HOST MEM.
0 - No split , RAW read/write transfer size from MAC is put out on bus
    as burst length
1 - Split at 256 byte boundary
2,3 - Reserved

With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when
issue happened. It broke PCIe spec and caused PCIe stuck. So revert
the default value from 0 to 1.

Tested:  IPQ8064 + QCA9984 with firmware 10.4-3.10-00047
         QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044
         Synaptics AS370 + QCA9888  with firmware 10.4-3.9.0.2--00040

Signed-off-by: Zhi Chen 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin

brcmfmac: Set timeout value when configuring power save

2020-09-03T09:26:49+00:00

[ Upstream commit 3dc05ffb04436020f63138186dbc4f37bd938552 ]

Set the timeout value as per cfg80211's set_power_mgmt() request. If the
requested value value is left undefined we set it to 2 seconds, the
maximum supported value.

Signed-off-by: Nicolas Saenz Julienne 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200721112302.22718-1-nsaenzjulienne@suse.de
Signed-off-by: Sasha Levin

rtlwifi: rtl8192cu: Prevent leaking urb

2020-09-03T09:26:45+00:00

[ Upstream commit 03128643eb5453a798db5770952c73dc64fcaf00 ]

If usb_submit_urb fails the allocated urb should be unanchored and
released.

Signed-off-by: Reto Schneider 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch
Signed-off-by: Sasha Levin

ipvlan: fix device features

2020-09-03T09:26:41+00:00

[ Upstream commit d0f5c7076e01fef6fcb86988d9508bf3ce258bd4 ]

Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().

--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#

--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar 
Cc: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ena: Make missed_tx stat incremental

2020-09-03T09:26:40+00:00

[ Upstream commit ccd143e5150f24b9ba15145c7221b61dd9e41021 ]

Most statistics in ena driver are incremented, meaning that a stat's
value is a sum of all increases done to it since driver/queue
initialization.

This patch makes all statistics this way, effectively making missed_tx
statistic incremental.
Also added a comment regarding rx_drops and tx_drops to make it
clearer how these counters are calculated.

Fixes: 11095fdb712b ("net: ena: add statistics for missed tx packets")
Signed-off-by: Shay Agroskin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: check for timeout

2020-08-26T08:41:06+00:00

[ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ]

clang static analysis reports this problem

b53_common.c:1583:13: warning: The left expression of the compound
  assignment is an uninitialized value. The computed value will
  also be garbage
        ent.port &= ~BIT(port);
        ~~~~~~~~ ^

ent is set by a successful call to b53_arl_read().  Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.

So add -ETIMEDOUT to the switch statement.  Because
b53_arl_op_wait() already prints out a message, do not add another
one.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

2020-08-26T08:41:06+00:00

[ Upstream commit c3d897e01aef8ddc43149e4d661b86f823e3aae7 ]

netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.

Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.

Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF")
Signed-off-by: Haiyang Zhang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin