daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.

saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX
port is flooded on all other user ports if the DSA switch is configured
without VLAN support since PORT_MATRIX in PCR regs contains all user
ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue
defining default VLAN-ID 0 for MT7530 MMIO devices.

Fixes: 110c18bfed414 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the
ppp driver not initializing a 2-byte header when using socket filter.

The following code can generate a PPP filter BPF program:
'''
struct bpf_program fp;
pcap_t *handle;
handle = pcap_open_dead(DLT_PPP_PPPD, 65535);
pcap_compile(handle, &fp, "ip and outbound", 0, 0);
bpf_dump(&fp, 1);
'''
Its output is:
'''
(000) ldh [2]
(001) jeq #0x21 jt 2 jf 5
(002) ldb [0]
(003) jeq #0x1 jt 4 jf 5
(004) ret #65535
(005) ret #0
'''
Wen can find similar code at the following link:
https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680
The maintainer of this code repository is also the original maintainer
of the ppp driver.

As you can see the BPF program skips 2 bytes of data and then reads the
'Protocol' field to determine if it's an IP packet. Then it read the first
byte of the first 2 bytes to determine the direction.

The issue is that only the first byte indicating direction is initialized
in current ppp driver code while the second byte is not initialized.

For normal BPF programs generated by libpcap, uninitialized data won't be
used, so it's not a problem. However, for carefully crafted BPF programs,
such as those generated by syzkaller [2], which start reading from offset
0, the uninitialized data will be used and caught by KMSAN.

[1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791
[2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000

Cc: Paul Mackerras <paulus@samba.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enable the checksum option for these two endpoints in order to allow
mobile data to actually work. Without this, no packets seem to make it
through the IPA.

Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As per downstream reference, max_writes should be 12 and max_reads
should be 13.

Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the downstream IPA driver there's only one group defined for source
and destination, and the destination group doesn't have a _DPL suffix.

Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
bugfixes for 6.14:

 * regressions from this cycle:
   - mac80211: fix sparse warning for monitor
   - nl80211: disable multi-link reconfiguration (needs fixing)
 * older issues:
   - cfg80211: reject badly combined cooked monitor,
               fix regulatory hint validity checks
   - mac80211: handle TXQ flush w/o driver per-sta flush,
               fix debugfs for monitor, fix element inheritance
   - iwlwifi: fix rfkill, dead firmware handling, rate API
              version, free A-MSDU handling, avoid large
              allocations, fix string format
   - brcmfmac: fix power handling on some boards

* tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: nl80211: disable multi-link reconfiguration
  wifi: cfg80211: regulatory: improve invalid hints checking
  wifi: brcmfmac: keep power during suspend if board requires it
  wifi: mac80211: Fix sparse warning for monitor_sdata
  wifi: mac80211: fix vendor-specific inheritance
  wifi: mac80211: fix MLE non-inheritance parsing
  wifi: iwlwifi: Fix A-MSDU TSO preparation
  wifi: iwlwifi: Free pages allocated when failing to build A-MSDU
  wifi: iwlwifi: limit printed string from FW file
  wifi: iwlwifi: mvm: use the right version of the rate API
  wifi: iwlwifi: mvm: don't try to talk to a dead firmware
  wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend
  wifi: iwlwifi: mvm: clean up ROC on failure
  wifi: iwlwifi: fw: avoid using an uninitialized variable
  wifi: iwlwifi: fw: allocate chained SG tables for dump
  wifi: mac80211: remove debugfs dir for virtual monitor
  wifi: mac80211: Cleanup sta TXQs on flush
  wifi: nl80211: reject cooked mode if it is set along with other flags
====================

Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

During the initialization of ptp, hclge_ptp_get_cycle might return an error
and returned directly without unregister clock and free it. To avoid that,
call hclge_ptp_destroy_clock to unregist and free clock if
hclge_ptp_get_cycle failed.

Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol.
It seems very unlikely user would want to intentionally
disable it.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Partially revert commit b71724147e73 ("be2net: replace polling with
sleeping in the FW completion path") w.r.t mcc mutex it introduces and the
use of usleep_range. The be2net be_ndo_bridge_getlink() callback is
called with rcu_read_lock, so this code has been broken for a long time.
Both the mutex_lock and the usleep_range can cause the issue Ian Kumlien
reported[1]. The call path is:
be_ndo_bridge_getlink -> be_cmd_get_hsw_config -> be_mcc_notify_wait ->
be_mcc_wait_compl -> usleep_range()

[1] https://lore.kernel.org/netdev/CAA85sZveppNgEVa_FD+qhOMtG_AavK9_mFiU+jWrMtXmwqefGA@mail.gmail.com/

Tested-by: Ian Kumlien <ian.kumlien@gmail.com>
Fixes: b71724147e73 ("be2net: replace polling with sleeping in the FW completion path")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250227164129.1201164-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>