linux.git/drivers/pci/controller/dwc, branch v6.6.13

PCI: exynos: Don't discard .remove() callback

2023-11-28T17:20:01+00:00

commit 83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream.

With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

  WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Alim Akhtar 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: kirin: Don't discard .remove() callback

2023-11-28T17:20:01+00:00

commit 3064ef2e88c1629c1e67a77d7bc20020b35846f2 upstream.

With CONFIG_PCIE_KIRIN=y and kirin_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

  drivers/pci/controller/dwc/pcie-kirin: section mismatch in reference: kirin_pcie_driver+0x8 (section: .data) -> kirin_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 000f60db784b ("PCI: kirin: Add support for a PHY layer")
Link: https://lore.kernel.org/r/20231001170254.2506508-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers

2023-11-28T17:20:01+00:00

commit a07d2497ed657eb2efeb967af47e22f573dcd1d6 upstream.

The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.

On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.

So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.

Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.

[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin 
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Krzysztof Wilczyński 
Reviewed-by: Serge Semin 
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Don't discard .probe() callback

2023-11-28T17:20:00+00:00

commit 7994db905c0fd692cf04c527585f08a91b560144 upstream.

The __init annotation makes the ks_pcie_probe() function disappear after
booting completes. However a device can also be bound later. In that case,
we try to call ks_pcie_probe(), but the backing memory is likely already
overwritten.

The right thing to do is do always have the probe callback available.  Note
that the (wrong) __refdata annotation prevented this issue to be noticed by
modpost.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Don't discard .remove() callback

2023-11-28T17:20:00+00:00

commit 200bddbb3f5202bbce96444fdc416305de14f547 upstream.

With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
Note that this driver cannot be compiled as a module, so ks_pcie_remove()
was always discarded before this change and modpost couldn't warn about
this issue. Furthermore the __ref annotation also prevents a warning.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling

2023-11-28T17:19:44+00:00

[ Upstream commit 89db0793c9f2da265ecb6c1681f899d9af157f37 ]

Update dw_pcie_link_set_max_link_width() to set PCI_EXP_LNKCAP_MLW.

In accordance with the DW PCIe RC/EP HW manuals [1,2,3,...] aside with
the PORT_LINK_CTRL_OFF.LINK_CAPABLE and GEN2_CTRL_OFF.NUM_OF_LANES[8:0]
field there is another one which needs to be updated.

It's LINK_CAPABILITIES_REG.PCIE_CAP_MAX_LINK_WIDTH. If it isn't done at
the very least the maximum link-width capability CSR won't expose the
actual maximum capability.

[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.60a, March 2015, p.1032
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.70a, March 2016, p.1065
[3] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
    Version 4.90a, March 2016, p.1057
...
[X] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
      Version 5.40a, March 2019, p.1396
[X+1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
      Version 5.40a, March 2019, p.1266

Suggested-by: Serge Semin 
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Krzysztof Wilczyński 
Reviewed-by: Manivannan Sadhasivam 
Reviewed-by: Serge Semin 
Signed-off-by: Sasha Levin

PCI: dwc: Add dw_pcie_link_set_max_link_width()

2023-11-28T17:19:44+00:00

[ Upstream commit a9a1bcba90254975d4adbcca53f720318cf81c0c ]

This is a preparation before adding the Max-Link-width capability
setup which would in its turn complete the max-link-width setup
procedure defined by Synopsys in the HW-manual.

Seeing there is a max-link-speed setup method defined in the DW PCIe
core driver it would be good to have a similar function for the link
width setup.

That's why we need to define a dedicated function first from already
implemented but incomplete link-width setting up code.

Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Krzysztof Wilczyński 
Reviewed-by: Manivannan Sadhasivam 
Reviewed-by: Serge Semin 
Signed-off-by: Sasha Levin

PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields

2023-11-28T17:19:43+00:00

[ Upstream commit 759574abd78e3b47ec45bbd31a64e8832cf73f97 ]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.

Similarly, change custom code that misleadingly used
PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write
to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW).

Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

PCI: qcom: Fix IPQ8074 enumeration

2023-09-29T20:47:25+00:00

PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is used by qcom_pcie_post_init_2_3_3().
This PCIe slave address space size register offset is 0x358 but was
incorrectly changed to 0x16c by 39171b33f652 ("PCI: qcom: Remove PCIE20_
prefix from register definitions").

This prevented access to slave address space registers like iATU, etc.,
so the IPQ8074 PCIe controller was not enumerated.

Revert back to the correct 0x358 offset and remove the unused
PARF_SLV_ADDR_SPACE_SIZE_2_3_3.

Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
Link: https://lore.kernel.org/r/20230919102948.1844909-1-quic_srichara@quicinc.com
Tested-by: Robert Marko 
Signed-off-by: Sricharan Ramabadhran 
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Manivannan Sadhasivam 
Reviewed-by: Konrad Dybcio 
Cc: stable@vger.kernel.org	# v6.4+

Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-08-31T03:23:07+00:00

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Add locking to read/modify/write PCIe Capability Register accessors
     for Link Control and Root Control
   - Use pci_dev_id() when possible instead of manually composing ID
     from dev->bus->number and dev->devfn

  Resource management:
   - Move prototypes for __weak sysfs resource files to linux/pci.h to
     fix 'no previous prototype' warnings
   - Make more I/O port accesses depend on HAS_IOPORT
   - Use devm_platform_get_and_ioremap_resource() instead of open-coding
     platform_get_resource() followed by devm_ioremap_resource()

  Power management:
   - Ensure devices are powered up while accessing VPD
   - If device is powered-up, keep it that way while polling for PME
   - Only read PCI_PM_CTRL register when available, to avoid reading the
     wrong register and corrupting dev->current_state

  Virtualization:
   - Avoid Secondary Bus Reset on NVIDIA T4 GPUs

  Error handling:
   - Remove unused pci_disable_pcie_error_reporting()
   - Unexport pci_enable_pcie_error_reporting(), used only by aer.c
   - Unexport pcie_port_bus_type, used only by PCI core

  VGA:
   - Simplify and clean up typos in VGA arbiter

  Apple PCIe controller driver:
   - Initialize pcie->nvecs (number of available MSIs) before use

  Broadcom iProc PCIe controller driver:
   - Use of_property_read_bool() instead of low-level accessors for
     boolean properties

  Broadcom STB PCIe controller driver:
   - Assert PERST# when probing BCM2711 because some bootloaders don't
     do it

  Freescale i.MX6 PCIe controller driver:
   - Add .host_deinit() callback so we can clean up things like
     regulators on probe failure or driver unload

  Freescale Layerscape PCIe controller driver:
   - Add support for link-down notification so the endpoint driver can
     process LINK_DOWN events
   - Add suspend/resume support, including manual
     PME_Turn_off/PME_TO_Ack handshake
   - Save Link Capabilities during probe so they can be restored when
     handling a link-up event, since the controller loses the Link Width
     and Link Speed values during reset

  Intel VMD host bridge driver:
   - Fix disable of bridge windows during domain reset; previously we
     cleared the base/limit registers, which actually left the windows
     enabled

  Marvell MVEBU PCIe controller driver:
   - Remove unused busn member

  Microchip PolarFlare PCIe controller driver:
   - Fix interrupt bit definitions so the SEC and DED interrupt handlers
     work correctly
   - Make driver buildable as a module
   - Read FPGA MSI configuration parameters from hardware instead of
     hard-coding them

  Microsoft Hyper-V host bridge driver:
   - To avoid a NULL pointer dereference, skip MSI restore after
     hibernate if MSI/MSI-X hasn't been enabled

  NVIDIA Tegra194 PCIe controller driver:
   - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
     Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
     endpoints below a switch (because other devices below the switch
     might already be operating), which leads to 'Malformed TLP' errors

  Qualcomm PCIe controller driver:
   - Add DT and driver support for interconnect bandwidth voting for
     'pcie-mem' and 'cpu-pcie' interconnects
   - Fix broken SDX65 'compatible' DT property
   - Configure controller so MHI bus master clock will be switched off
     while in ASPM L1.x states
   - Use alignment restriction from EPF core in EPF MHI driver
   - Add Endpoint eDMA support
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driversupport
   - Add MHI eDMA support
   - Add Snapdragon SM8450 support to the EPF MHI driver
   - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
     latency
   - Add sa8775p DT binding and driver support

  Rockchip PCIe controller driver:
   - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
     upper 32 bits

  SiFive FU740 PCIe controller driver:
   - Set the supported number of MSI vectors so we can use all available
     MSI interrupts

  Synopsys DesignWare PCIe controller driver:
   - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
     dw_pcie_resume_noirq()) to be called by controller driver
     suspend/resume ops, and a controller callback to send PME_Turn_Off

  MicroSemi Switchtec management driver:
   - Add support for PCIe Gen5 devices

  Miscellaneous:
   - Reorder and compress to reduce size of struct pci_dev
   - Fix race in DOE destroy_work_on_stack()
   - Add stubs to avoid casts between incompatible function types
   - Explicitly include correct DT includes to untangle headers"

* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
  PCI: qcom-ep: Add ICC bandwidth voting support
  dt-bindings: PCI: qcom: ep: Add interconnects path
  PCI: qcom-ep: Treat unknown IRQ events as an error
  dt-bindings: PCI: qcom: Fix SDX65 compatible
  PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
  PCI: epf-mhi: Use iATU for small transfers
  PCI: epf-mhi: Add support for SM8450
  PCI: epf-mhi: Add eDMA support
  PCI: qcom-ep: Add eDMA support
  PCI: epf-mhi: Make use of the alignment restriction from EPF core
  PCI/PM: Only read PCI_PM_CTRL register when available
  PCI: qcom: Add support for sa8775p SoC
  dt-bindings: PCI: qcom: Add sa8775p compatible
  PCI: qcom-ep: Pass alignment restriction to the EPF core
  PCI: Simplify pcie_capability_clear_and_set_word() control flow
  PCI: Tidy config space save/restore messages
  PCI: Fix code formatting inconsistencies
  PCI: Fix typos in docs and comments
  PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
  PCI: Simplify pci_dev_driver()
  ...