[ Upstream commit 7d815f4afa87f2032b650ae1bba7534b550a6b8b ]

Add check for hv_is_hyperv_initialized() at the top of
init_hv_pci_drv(), so if the pci-hyperv driver is force-loaded on non
Hyper-V platforms, the init_hv_pci_drv() will exit immediately, without
any side effects, like assignments to hvpci_block_ops, etc.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-and-tested-by: Mohammad Alqayeem <mohammad.alqyeem@nutanix.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1621984653-1210-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...

Pull networking updates from David Miller:

 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.

 2) Use bio_vec in the networking instead of custom skb_frag_t, from
    Matthew Wilcox.

 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.

 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.

 5) Support all variants of 5750X bnxt_en chips, from Michael Chan.

 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
    Buslov.

 7) Add TCP syn cookies bpf helper, from Petar Penkov.

 8) Add 'nettest' to selftests and use it, from David Ahern.

 9) Add extack support to drop_monitor, add packet alert mode and
    support for HW drops, from Ido Schimmel.

10) Add VLAN offload to stmmac, from Jose Abreu.

11) Lots of devm_platform_ioremap_resource() conversions, from
    YueHaibing.

12) Add IONIC driver, from Shannon Nelson.

13) Several kTLS cleanups, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
  mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
  mlxsw: spectrum: Register CPU port with devlink
  mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
  net: ena: fix incorrect update of intr_delay_resolution
  net: ena: fix retrieval of nonadaptive interrupt moderation intervals
  net: ena: fix update of interrupt moderation register
  net: ena: remove all old adaptive rx interrupt moderation code from ena_com
  net: ena: remove ena_restore_ethtool_params() and relevant fields
  net: ena: remove old adaptive interrupt moderation code from ena_netdev
  net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
  net: ena: enable the interrupt_moderation in driver_supported_features
  net: ena: reimplement set/get_coalesce()
  net: ena: switch to dim algorithm for rx adaptive interrupt moderation
  net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
  net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
  ethtool: implement Energy Detect Powerdown support via phy-tunable
  xen-netfront: do not assume sk_buff_head list is empty in error handling
  s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
  net: ena: don't wake up tx queue when down
  drop_monitor: Better sanitize notified packets
  ...

As recommended by Azure host team, the bytes 4, 5 have more uniqueness
(info entropy) than bytes 8, 9 so use them as the PCI domain numbers.

On older hosts, bytes 4, 5 can also be used -- no backward compatibility
issues are introduced and the chance of collision is greatly reduced.

In the rare cases of collision, the driver code detects and finds
another number that is not in use.

Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Sasha Levin <sashal@kernel.org>

This interface driver is a helper driver allows other drivers to
have a common interface with the Hyper-V PCI frontend driver.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Windows SR-IOV provides a backchannel mechanism in software for communication
between a VF driver and a PF driver.  These "configuration blocks" are
similar in concept to PCI configuration space, but instead of doing reads and
writes in 32-bit chunks through a very slow path, packets of up to 128 bytes
can be sent or received asynchronously.

Nearly every SR-IOV device contains just such a communications channel in
hardware, so using this one in software is usually optional.  Using the
software channel, however, allows driver implementers to leverage software
tools that fuzz the communications channel looking for vulnerabilities.

The usage model for these packets puts the responsibility for reading or
writing on the VF driver.  The VF driver sends a read or a write packet,
indicating which "block" is being referred to by number.

If the PF driver wishes to initiate communication, it can "invalidate" one or
more of the first 64 blocks.  This invalidation is delivered via a callback
supplied by the VF driver by this driver.

No protocol is implied, except that supplied by the PF and VF drivers.

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently in Azure cloud, for passthrough devices, the host sets the
device instance ID's bytes 8 - 15 to a value derived from the host HWID,
which is the same on all devices in a VM. So, the device instance ID's
bytes 8 and 9 provided by the host are no longer unique. This affects
all Azure hosts since July 2018, and can cause device passthrough to VMs
to fail because the bytes 8 and 9 are used as PCI domain number.
Collision of domain numbers will cause the second device with the same
domain number fail to load.

In the cases of collision, we will detect and find another number that is
not in use.

Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Sasha Levin <sashal@kernel.org>

The slot must be removed before the pci_dev is removed, otherwise a panic
can happen due to use-after-free.

Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org

To allocate its fwnode that is then used to allocate an irqdomain,
the driver uses irq_domain_alloc_fwnode(), passing it a VA as an
identifier. This is a rather bad idea, as this address ends up
published in debugfs (and we want to move away from VAs there
anyway).

Instead, let's allocate a named fwnode by using the device GUID as
an identifier. It is allegedly unique, and can be traced back to
the original device.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Fix a use-after-free in hv_eject_device_work().

Fixes: 05f151a73ec2 ("PCI: hv: Fix a memory leak in hv_eject_device_work()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org