linux.git/drivers/pci, branch v4.19.259 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git PCI: Add ACS quirk for Broadcom BCM5750x NICs 2022-08-25T09:15:42+00:00 Pavan Chebbi pavan.chebbi@broadcom.com 2022-06-09T17:41:47+00:00 68bdac3184f9315a1dabe29903ffe8e98717c9b8 [ Upstream commit afd306a65cedb9589564bdb23a0c368abc4215fd ] The Broadcom BCM5750x NICs may be multi-function devices. They do not advertise ACS capability. Peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for these devices so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit afd306a65cedb9589564bdb23a0c368abc4215fd ]

The Broadcom BCM5750x NICs may be multi-function devices.  They do not
advertise ACS capability. Peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.

Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: hv: Fix interrupt mapping for multi-MSI 2022-07-29T15:10:38+00:00 Jeffrey Hugo quic_jhugo@quicinc.com 2022-07-25T16:32:40+00:00 ae5e8a3f52cccbc1654f578a7fe29ff79ecf6e1f commit a2bad844a67b1c7740bda63e87453baf63c3a7f7 upstream. According to Dexuan, the hypervisor folks beleive that multi-msi allocations are not correct. compose_msi_msg() will allocate multi-msi one by one. However, multi-msi is a block of related MSIs, with alignment requirements. In order for the hypervisor to allocate properly aligned and consecutive entries in the IOMMU Interrupt Remapping Table, there should be a single mapping request that requests all of the multi-msi vectors in one shot. Dexuan suggests detecting the multi-msi case and composing a single request related to the first MSI. Then for the other MSIs in the same block, use the cached information. This appears to be viable, so do it. 4.19 backport - add hv_msi_get_int_vector helper function. Fixed merge conflict due to delivery_mode name change (APIC_DELIVERY_MODE_FIXED is the value given to dest_Fixed). Removed unused variable in hv_compose_msi_msg. Fixed reference to msi_desc->pci to point to the same is_msix variable. Removed changes to compose_msi_req_v3 since it doesn't exist yet. Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quicinc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a2bad844a67b1c7740bda63e87453baf63c3a7f7 upstream.

According to Dexuan, the hypervisor folks beleive that multi-msi
allocations are not correct.  compose_msi_msg() will allocate multi-msi
one by one.  However, multi-msi is a block of related MSIs, with alignment
requirements.  In order for the hypervisor to allocate properly aligned
and consecutive entries in the IOMMU Interrupt Remapping Table, there
should be a single mapping request that requests all of the multi-msi
vectors in one shot.

Dexuan suggests detecting the multi-msi case and composing a single
request related to the first MSI.  Then for the other MSIs in the same
block, use the cached information.  This appears to be viable, so do it.

4.19 backport - add hv_msi_get_int_vector helper function. Fixed merge
conflict due to delivery_mode name change (APIC_DELIVERY_MODE_FIXED
is the value given to dest_Fixed). Removed unused variable in
hv_compose_msi_msg. Fixed reference to msi_desc->pci to point to
the same is_msix variable. Removed changes to compose_msi_req_v3 since
it doesn't exist yet.

Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg() 2022-07-29T15:10:38+00:00 Jeffrey Hugo quic_jhugo@quicinc.com 2022-07-25T16:32:39+00:00 c51ff8cf04b1b1eb5bb41b35ec71fbc86cc1ff3b commit b4b77778ecc5bfbd4e77de1b2fd5c1dd3c655f1f upstream. Currently if compose_msi_msg() is called multiple times, it will free any previous IRTE allocation, and generate a new allocation. While nothing prevents this from occurring, it is extraneous when Linux could just reuse the existing allocation and avoid a bunch of overhead. However, when future IRTE allocations operate on blocks of MSIs instead of a single line, freeing the allocation will impact all of the lines. This could cause an issue where an allocation of N MSIs occurs, then some of the lines are retargeted, and finally the allocation is freed/reallocated. The freeing of the allocation removes all of the configuration for the entire block, which requires all the lines to be retargeted, which might not happen since some lines might already be unmasked/active. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1652282582-21595-1-git-send-email-quic_jhugo@quicinc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b4b77778ecc5bfbd4e77de1b2fd5c1dd3c655f1f upstream.

Currently if compose_msi_msg() is called multiple times, it will free any
previous IRTE allocation, and generate a new allocation.  While nothing
prevents this from occurring, it is extraneous when Linux could just reuse
the existing allocation and avoid a bunch of overhead.

However, when future IRTE allocations operate on blocks of MSIs instead of
a single line, freeing the allocation will impact all of the lines.  This
could cause an issue where an allocation of N MSIs occurs, then some of
the lines are retargeted, and finally the allocation is freed/reallocated.
The freeing of the allocation removes all of the configuration for the
entire block, which requires all the lines to be retargeted, which might
not happen since some lines might already be unmasked/active.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652282582-21595-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI 2022-07-29T15:10:38+00:00 Jeffrey Hugo quic_jhugo@quicinc.com 2022-07-25T16:32:38+00:00 d1091f1a84ecb1af451016827f09492ae9f6ade7 commit 455880dfe292a2bdd3b4ad6a107299fce610e64b upstream. In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first MSI of the N allocated. This is because only the first msi_desc is cached and it is shared by all the MSIs of the multi-MSI block. This means that hv_arch_irq_unmask() gets the correct address, but the wrong data (always 0). This can break MSIs. Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0. hv_arch_irq_unmask() is called on MSI0. It uses a hypercall to configure the MSI address and data (0) to vector 34 of CPU0. This is correct. Then hv_arch_irq_unmask is called on MSI1. It uses another hypercall to configure the MSI address and data (0) to vector 33 of CPU0. This is wrong, and results in both MSI0 and MSI1 being routed to vector 33. Linux will observe extra instances of MSI1 and no instances of MSI0 despite the endpoint device behaving correctly. For the multi-MSI case, we need unique address and data info for each MSI, but the cached msi_desc does not provide that. However, that information can be gotten from the int_desc cached in the chip_data by compose_msi_msg(). Fix the multi-MSI case to use that cached information instead. Since hv_set_msi_entry_from_desc() is no longer applicable, remove it. 4.19 backport - hv_set_msi_entry_from_desc doesn't exist to be removed. int_entry replaces msi_entry for location int_desc is written to. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quicinc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 455880dfe292a2bdd3b4ad6a107299fce610e64b upstream.

In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first
MSI of the N allocated.  This is because only the first msi_desc is cached
and it is shared by all the MSIs of the multi-MSI block.  This means that
hv_arch_irq_unmask() gets the correct address, but the wrong data (always
0).

This can break MSIs.

Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0.

hv_arch_irq_unmask() is called on MSI0.  It uses a hypercall to configure
the MSI address and data (0) to vector 34 of CPU0.  This is correct.  Then
hv_arch_irq_unmask is called on MSI1.  It uses another hypercall to
configure the MSI address and data (0) to vector 33 of CPU0.  This is
wrong, and results in both MSI0 and MSI1 being routed to vector 33.  Linux
will observe extra instances of MSI1 and no instances of MSI0 despite the
endpoint device behaving correctly.

For the multi-MSI case, we need unique address and data info for each MSI,
but the cached msi_desc does not provide that.  However, that information
can be gotten from the int_desc cached in the chip_data by
compose_msi_msg().  Fix the multi-MSI case to use that cached information
instead.  Since hv_set_msi_entry_from_desc() is no longer applicable,
remove it.

4.19 backport - hv_set_msi_entry_from_desc doesn't exist to be removed.
int_entry replaces msi_entry for location int_desc is written to.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hv: Fix multi-MSI to allow more than one MSI vector 2022-07-29T15:10:37+00:00 Jeffrey Hugo quic_jhugo@quicinc.com 2022-07-25T16:32:37+00:00 d6e41a92a8935b9d3deacee32766e8332aaba44f commit 08e61e861a0e47e5e1a3fb78406afd6b0cea6b6d upstream. If the allocation of multiple MSI vectors for multi-MSI fails in the core PCI framework, the framework will retry the allocation as a single MSI vector, assuming that meets the min_vecs specified by the requesting driver. Hyper-V advertises that multi-MSI is supported, but reuses the VECTOR domain to implement that for x86. The VECTOR domain does not support multi-MSI, so the alloc will always fail and fallback to a single MSI allocation. In short, Hyper-V advertises a capability it does not implement. Hyper-V can support multi-MSI because it coordinates with the hypervisor to map the MSIs in the IOMMU's interrupt remapper, which is something the VECTOR domain does not have. Therefore the fix is simple - copy what the x86 IOMMU drivers (AMD/Intel-IR) do by removing X86_IRQ_ALLOC_CONTIGUOUS_VECTORS after calling the VECTOR domain's pci_msi_prepare(). 4.19 backport - adds the hv_msi_prepare wrapper function. X86_IRQ_ALLOC_TYPE_PCI_MSI changed to X86_IRQ_ALLOC_TYPE_MSI (same value). Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1649856981-14649-1-git-send-email-quic_jhugo@quicinc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 08e61e861a0e47e5e1a3fb78406afd6b0cea6b6d upstream.

If the allocation of multiple MSI vectors for multi-MSI fails in the core
PCI framework, the framework will retry the allocation as a single MSI
vector, assuming that meets the min_vecs specified by the requesting
driver.

Hyper-V advertises that multi-MSI is supported, but reuses the VECTOR
domain to implement that for x86.  The VECTOR domain does not support
multi-MSI, so the alloc will always fail and fallback to a single MSI
allocation.

In short, Hyper-V advertises a capability it does not implement.

Hyper-V can support multi-MSI because it coordinates with the hypervisor
to map the MSIs in the IOMMU's interrupt remapper, which is something the
VECTOR domain does not have.  Therefore the fix is simple - copy what the
x86 IOMMU drivers (AMD/Intel-IR) do by removing
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS after calling the VECTOR domain's
pci_msi_prepare().

4.19 backport - adds the hv_msi_prepare wrapper function.
X86_IRQ_ALLOC_TYPE_PCI_MSI changed to X86_IRQ_ALLOC_TYPE_MSI
(same value).

Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1649856981-14649-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: qcom: Fix unbalanced PHY init on probe errors 2022-06-14T14:59:27+00:00 Johan Hovold johan+linaro@kernel.org 2022-04-01T13:38:54+00:00 c4cb6399f05642d2bac0eeaa4171e18dbc493d41 commit 83013631f0f9961416abd812e228c8efbc2f6069 upstream. Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83013631f0f9961416abd812e228c8efbc2f6069 upstream.

Undo the PHY initialisation (e.g. balance runtime PM) if host
initialisation fails during probe.

Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org      # 4.5
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: qcom: Fix runtime PM imbalance on probe errors 2022-06-14T14:59:27+00:00 Johan Hovold johan+linaro@kernel.org 2022-04-01T13:38:53+00:00 c23628d3d293d02eff5a595cb941d4a64673ba2e commit 87d83b96c8d6c6c2d2096bd0bdba73bcf42b8ef0 upstream. Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral. Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.20 Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 87d83b96c8d6c6c2d2096bd0bdba73bcf42b8ef0 upstream.

Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.

Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org
Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org      # 4.20
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299 2022-06-14T14:59:27+00:00 Bjorn Helgaas bhelgaas@google.com 2022-05-26T21:52:23+00:00 b49fcf02f54e322e0902fbac67ec5dcc1cfa6dc2 commit 12068bb346db5776d0ec9bb4cd073f8427a1ac92 upstream. 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted braces around the new Elo i2 entry, so it overwrote the existing Gigabyte X299 entry. Add the appropriate braces. Found by: $ make W=1 drivers/pci/pci.o CC drivers/pci/pci.o drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init] 2974 | .ident = "Elo i2", | ^~~~~~~~ Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas Fixes: 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 12068bb346db5776d0ec9bb4cd073f8427a1ac92 upstream.

92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
X299 entry.  Add the appropriate braces.

Found by:

  $ make W=1 drivers/pci/pci.o
    CC      drivers/pci/pci.o
  drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
   2974 |   .ident = "Elo i2",
        |            ^~~~~~~~

Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas
Fixes: 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org  # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: rockchip: Fix find_first_zero_bit() limit 2022-06-14T14:59:23+00:00 Dan Carpenter dan.carpenter@oracle.com 2022-03-15T06:59:44+00:00 d6ab310ecdb25efff4c74f13fba615a54aa95708 [ Upstream commit 096950e230b8d83645c7cf408b9f399f58c08b96 ] The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits. Link: https://lore.kernel.org/r/20220315065944.GB13572@kili Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 096950e230b8d83645c7cf408b9f399f58c08b96 ]

The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits.

Link: https://lore.kernel.org/r/20220315065944.GB13572@kili
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: cadence: Fix find_first_zero_bit() limit 2022-06-14T14:59:23+00:00 Dan Carpenter dan.carpenter@oracle.com 2022-03-15T06:58:29+00:00 5085bb8ae9b64e03211c40a4cc1ecd77d5a3cc67 [ Upstream commit 0aa3a0937feeb91a0e4e438c3c063b749b194192 ] The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits. Link: https://lore.kernel.org/r/20220315065829.GA13572@kili Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0aa3a0937feeb91a0e4e438c3c063b749b194192 ]

The ep->ob_region_map bitmap is a long and it has BITS_PER_LONG bits.

Link: https://lore.kernel.org/r/20220315065829.GA13572@kili
Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>