linux.git/drivers/phy/starfive, branch v6.12.80 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure 2025-06-04T12:43:53+00:00 Hal Feng hal.feng@starfivetech.com 2025-04-22T10:12:44+00:00 2c09a5cbc0100e88b8872b11f4da01a656c97fbc [ Upstream commit 3f097adb9b6c804636bcf8d01e0e7bc037bee0d3 ] JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a long time of debugging and testing, we found that setting Rx clock gating control signal to normal power consumption mode can solve this problem. Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3f097adb9b6c804636bcf8d01e0e7bc037bee0d3 ]

JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a
long time of debugging and testing, we found that setting Rx clock gating
control signal to normal power consumption mode can solve this problem.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: starfive: jh7110-usb: Fix link configuration to controller 2024-10-17T14:49:44+00:00 Jan Kiszka jan.kiszka@siemens.com 2024-10-15T07:04:44+00:00 e10c52e7e064038d9bd67b20bf4ce92077d7d84e In order to connect the USB 2.0 PHY to its controller, we also need to set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot versions did that, but upstream firmware does not, and the kernel must not rely on such behavior anyway. Failing to set this left the USB gadget port invisible to connected hosts behind. Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1] Fixes: 16d3a71c20cf ("phy: starfive: Add JH7110 USB 2.0 PHY driver") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241015070444.20972-2-minda.chen@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
In order to connect the USB 2.0 PHY to its controller, we also need to
set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot
versions did that, but upstream firmware does not, and the kernel must
not rely on such behavior anyway. Failing to set this left the USB
gadget port invisible to connected hosts behind.

Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1]
Fixes: 16d3a71c20cf ("phy: starfive: Add JH7110 USB 2.0 PHY driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241015070444.20972-2-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: Correct the dphy configure process 2024-07-02T13:19:14+00:00 Changhuang Liang changhuang.liang@starfivetech.com 2024-06-27T02:00:59+00:00 8d2a3539517dbf13e970b3aabdf94b04a65d276c We actually want to calculate the alignment values first, then use the alignment value to look up the data from reg_configs[]. Fixes: d3ab79553308 ("phy: starfive: Add mipi dphy tx support") Reviewed-by: Shengyang Chen <shengyang.chen@starfivetech.com> Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com> Link: https://lore.kernel.org/r/20240627020059.163535-1-changhuang.liang@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
We actually want to calculate the alignment values first, then
use the alignment value to look up the data from reg_configs[].

Fixes: d3ab79553308 ("phy: starfive: Add mipi dphy tx support")

Reviewed-by: Shengyang Chen <shengyang.chen@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20240627020059.163535-1-changhuang.liang@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: Add mipi dphy tx support 2024-06-15T12:08:30+00:00 Shengyang Chen shengyang.chen@starfivetech.com 2024-04-18T03:50:20+00:00 d3ab7955330843699cdcc413edd7993923e6c016 Add mipi dphy tx support for the StarFive JH7110 SoC. It is a module which is used to receive data from DSI driver and transfer data to DSI interface like mipi screen. Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com> Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com> Link: https://lore.kernel.org/r/20240418035020.47876-3-shengyang.chen@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add mipi dphy tx support for the StarFive JH7110 SoC.
It is a module which is used to receive data from DSI
driver and transfer data to DSI interface like mipi screen.

Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20240418035020.47876-3-shengyang.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: remove unused struct 'regval' 2024-06-03T13:59:01+00:00 Dr. David Alan Gilbert linux@treblig.org 2024-05-27T20:59:37+00:00 9d3799c3e807ab5777cda6ae48ebc127b83bc8b0 'regval' is unused since the original commit f8aa660841bc ("phy: starfive: Add mipi dphy rx support"). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com> Link: https://lore.kernel.org/r/20240527205937.165325-1-linux@treblig.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
'regval' is unused since the original
commit f8aa660841bc ("phy: starfive: Add mipi dphy rx support").

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20240527205937.165325-1-linux@treblig.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: StarFive PHYs should depend on ARCH_STARFIVE 2023-07-26T13:39:08+00:00 Geert Uytterhoeven geert+renesas@glider.be 2023-07-25T15:49:27+00:00 e7379477f4478c290be47cde3ad8a39d5ff561d2 The various StarFive PHYs are only present on StarFive SoCs. Hence add a dependency on ARCH_STARFIVE, to prevent asking the user about these drivers when configuring a kernel without StarFive SoC support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com> Link: https://lore.kernel.org/r/12097f6107a18e2f7cfb80f47ac7b27808e062c4.1690300076.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org> 
The various StarFive PHYs are only present on StarFive SoCs.  Hence add
a dependency on ARCH_STARFIVE, to prevent asking the user about these
drivers when configuring a kernel without StarFive SoC support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/12097f6107a18e2f7cfb80f47ac7b27808e062c4.1690300076.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: make phys depend on HAS_IOMEM 2023-07-25T13:52:11+00:00 Vinod Koul vkoul@kernel.org 2023-07-25T06:38:56+00:00 ec6beb82587c73cff52730567016cbc6c17822a8 the startfive phy drivers use devm_platform_ioremap_resource() which on some archs (s390) is not present. So make the drivers depend on HAS_IOMEM Fixes: f8aa660841bc ("phy: starfive: Add mipi dphy rx support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307250509.oeudxG28-lkp@intel.com/ Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230725063856.482696-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
the startfive phy drivers use devm_platform_ioremap_resource() which on
some archs (s390) is not present. So make the drivers depend on HAS_IOMEM

Fixes: f8aa660841bc ("phy: starfive: Add mipi dphy rx support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307250509.oeudxG28-lkp@intel.com/
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230725063856.482696-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: Add mipi dphy rx support 2023-07-24T10:43:03+00:00 Changhuang Liang changhuang.liang@starfivetech.com 2023-07-18T07:08:03+00:00 f8aa660841bca12aed51c967ed9bdaf1d97996ed Add mipi dphy rx support for the StarFive JH7110 SoC. It is used to transfer CSI camera data. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com> Reviewed-by: Minda Chen <minda.chen@starfivetech.com> Link: https://lore.kernel.org/r/20230718070803.16660-3-changhuang.liang@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add mipi dphy rx support for the StarFive JH7110 SoC. It is used to
transfer CSI camera data.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Minda Chen <minda.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230718070803.16660-3-changhuang.liang@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: fix error code in probe 2023-07-24T10:23:54+00:00 Dan Carpenter dan.carpenter@linaro.org 2023-07-18T07:02:49+00:00 86fe3e9f4c635cf740b31161ee35aed4a78e03f9 This is using the wrong pointer, "phy->regs" vs "phy->phy". Fixes: fd097f48eea9 ("phy: starfive: Add JH7110 PCIE 2.0 PHY driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/3cc81f2a-efd7-4ef7-ae6b-e38c91efe153@moroto.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> 
This is using the wrong pointer, "phy->regs" vs "phy->phy".

Fixes: fd097f48eea9 ("phy: starfive: Add JH7110 PCIE 2.0 PHY driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/3cc81f2a-efd7-4ef7-ae6b-e38c91efe153@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: starfive: Add JH7110 PCIE 2.0 PHY driver 2023-07-12T16:57:44+00:00 Minda Chen minda.chen@starfivetech.com 2023-06-29T07:51:14+00:00 fd097f48eea95c9776a8846edfe9e328e9eaf7e2 Add Starfive JH7110 SoC PCIe 2.0 PHY driver support. PCIe 2.0 PHY default connect to PCIe controller. PCIe PHY can connect to USB 3.0 controller. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230629075115.11934-5-minda.chen@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Add Starfive JH7110 SoC PCIe 2.0 PHY driver support.
PCIe 2.0 PHY default connect to PCIe controller.
PCIe PHY can connect to USB 3.0 controller.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230629075115.11934-5-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>