linux.git/drivers/phy, branch v4.14.82

phy: phy-mtk-tphy: use auto instead of force to bypass utmi signals

2018-08-15T16:12:48+00:00

commit 00c0092c5f62147b7d85f0c6f1cf245a0a1ff3b6 upstream.

When system is running, if usb2 phy is forced to bypass utmi signals,
all PLL will be turned off, and it can't detect device connection
anymore, so replace force mode with auto mode which can bypass utmi
signals automatically if no device attached for normal flow.
But keep the force mode to fix RX sensitivity degradation issue.

Signed-off-by: Chunfeng Yun 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

phy: qcom-qusb2: Fix crash if nvmem cell not specified

2018-06-16T07:45:16+00:00

commit 0b4555e776ba0712c6fafb98b226b21fd05d2427 upstream.

Driver currently crashes due to NULL pointer deference
while updating PHY tune register if nvmem cell is NULL.
Since, fused value for Tune1/2 register is optional,
we'd rather bail out.

Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Reviewed-by: Vivek Gautam 
Reviewed-by: Evan Green 
Cc: stable  # 4.14+
Signed-off-by: Manu Gautam 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Greg Kroah-Hartman

phy: qcom-qmp: Fix phy pipe clock gating

2018-05-30T05:52:36+00:00

[ Upstream commit f8ba22a39e985c93e278709b1d5f20857a26b49b ]

Pipe clock comes out of the phy and is available as long as
the phy is turned on. Clock controller fails to gate this
clock after the phy is turned off and generates a warning.

/ # [   33.048561] gcc_usb3_phy_pipe_clk status stuck at 'on'
[   33.048585] ------------[ cut here ]------------
[   33.052621] WARNING: CPU: 1 PID: 18 at ../drivers/clk/qcom/clk-branch.c:97 clk_branch_wait+0xf0/0x108
[   33.057384] Modules linked in:
[   33.066497] CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G        W       4.12.0-rc7-00024-gfe926e34c36d-dirty #96
[   33.069451] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
...
[   33.278565] [] clk_branch_wait+0xf0/0x108
[   33.286375] [] clk_branch2_disable+0x28/0x34
[   33.291761] [] clk_core_disable+0x5c/0x88
[   33.297660] [] clk_core_disable_lock+0x20/0x34
[   33.303129] [] clk_disable+0x1c/0x24
[   33.309384] [] qcom_qmp_phy_poweroff+0x20/0x48
[   33.314328] [] phy_power_off+0x80/0xdc
[   33.320492] [] dwc3_core_exit+0x94/0xa0
[   33.325784] [] dwc3_suspend_common+0x50/0x60
[   33.331080] [] dwc3_runtime_suspend+0x48/0x6c
[   33.336810] [] pm_generic_runtime_suspend+0x28/0x38
[   33.342627] [] __rpm_callback+0x150/0x254
[   33.349222] [] rpm_callback+0x24/0x78
[   33.354604] [] rpm_suspend+0xe0/0x4e4
[   33.359813] [] pm_runtime_work+0xdc/0xf0
[   33.365028] [] process_one_work+0x12c/0x28c
[   33.370576] [] worker_thread+0x58/0x3b8
[   33.376393] [] kthread+0x100/0x12c
[   33.381776] [] ret_from_fork+0x10/0x50

Fix this by disabling it as the first thing in phy_exit().

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Vivek Gautam 
Signed-off-by: Manu Gautam 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

phy: rockchip-emmc: retry calpad busy trimming

2018-05-30T05:52:35+00:00

[ Upstream commit a4781c2a74b249cad814ceea7272997bbd20051e ]

It turns out that 5us isn't enough for all cases, so let's
retry some more times to wait for caldone.

Signed-off-by: Shawn Lin 
Tested-by: Ziyuan Xu 
Signed-off-by: Caesar Wang 
Reviewed-by: Douglas Anderson 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUS

2018-04-24T07:36:23+00:00

commit d7119224bfe6e8efbf821a52db7da9530d790f07 upstream.

The AXP223 PMIC, like the AXP221, does not generate VBUS change
interrupts when N_VBUSEN is used to drive VBUS for the OTG port
on the board.

This was not noticed until recently, as most A23/A33 boards use
a GPIO pin that does not support interrupts for OTG ID detection.
This forces the driver to use polling. However the A33-OlinuXino
uses a pin that does support interrupts, so the driver uses them.
However the VBUS interrupt never fires, and the driver never gets
to update the VBUS status. This results in musb timing out waiting
for VBUS to rise.

This was worked around for the AXP221 by resorting to polling
changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for
missing Vbus det interrupts on A31"). This patch adds the A23 and
A33 to the list of SoCs that need the workaround.

Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the
		      sun8i-a33 SoC")
Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the
		      sun8i-a23 SoC")
Cc:  # 4.3.x: 68dbc2ce77bb phy-sun4i-usb:
		Use of_match_node to get model specific config data
Cc:  # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb:
		Fix optional gpios failing probe
Cc:  # 4.3.x: 04e59a0211ff phy-sun4i-usb:
		Fix irq free conditions to match request conditions
Cc:  # 4.3.x: 91d96f06a760 phy-sun4i-usb:
		Add workaround for missing Vbus det interrupts on A31
Cc:  # 4.3.x
Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Greg Kroah-Hartman 

Signed-off-by: Kishon Vijay Abraham I

phy: qcom-ufs: add MODULE_LICENSE tag

2018-04-08T12:26:30+00:00

commit 59fba0869acae06ff594dd7e9808ed673f53538a upstream.

While the specific UFS PHY drivers (14nm and 20nm) have a module
license, the common base module does not, leading to a Kbuild
failure:

WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o
FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable'

This adds a module description and license tag to fix the build.
I added both Yaniv and Vivek as authors here, as Yaniv sent the initial
submission, while Vivek did most of the work since.

Signed-off-by: Arnd Bergmann 
Acked-by: Bjorn Andersson 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Greg Kroah-Hartman

phy: cpcap-usb: Fix platform_get_irq_byname's error checking.

2018-03-03T09:24:22+00:00

[ Upstream commit e796cc6a3a9186c92092e2f5929cf8f65b56cf01 ]

The platform_get_irq_byname() function returns negative if an error occurs.
zero or positive number on success. platform_get_irq_byname() error
checking for zero is not correct.

Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Signed-off-by: Arvind Yadav 
Reviewed-by: Sebastian Reichel 
Acked-by: Tony Lindgren 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

phy: work around 'phys' references to usb-nop-xceiv devices

2018-01-23T18:58:16+00:00

commit b7563e2796f8b23c98afcfea7363194227fa089d upstream.

Stefan Wahren reports a problem with a warning fix that was merged
for v4.15: we had lots of device nodes with a 'phys' property pointing
to a device node that is not compliant with the binding documented in
Documentation/devicetree/bindings/phy/phy-bindings.txt

This generally works because USB HCD drivers that support both the generic
phy subsystem and the older usb-phy subsystem ignore most errors from
phy_get() and related calls and then use the usb-phy driver instead.

However, it turns out that making the usb-nop-xceiv device compatible with
the generic-phy binding changes the phy_get() return code from -EINVAL to
-EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns
-EPROBE_DEFER from its probe function rather than ignoring the failure,
breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is
enabled. The same code is used in the dwc3 driver and the usb_add_hcd()
function, so a reasonable assumption would be that many other platforms
are affected as well.

I have reviewed all the related patches and concluded that "usb-nop-xceiv"
is the only USB phy that is affected by the change, and since it is by far
the most commonly referenced phy, all the other USB phy drivers appear
to be used in ways that are are either safe in DT (they don't use the
'phys' property), or in the driver (they already ignore -EPROBE_DEFER
from generic-phy when usb-phy is available).

To work around the problem, this adds a special case to _of_phy_get()
so we ignore any PHY node that is compatible with "usb-nop-xceiv",
as we know that this can never load no matter how much we defer. In the
future, we might implement a generic-phy driver for "usb-nop-xceiv"
and then remove this workaround.

Since we generally want older kernels to also want to work with the
fixed devicetree files, it would be good to backport the patch into
stable kernels as well (3.13+ are possibly affected), even though they
don't contain any of the patches that may have caused regressions.

Fixes: 014d6da6cb25 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells
Fixes: c5bbf358b790 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
Fixes: 44e5dced2ef6 arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
Fixes: f568f6f554b8 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
Fixes: d745d5f277bf ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
Fixes: 915fbe59cbf2 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv
Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2
Link: https://patchwork.kernel.org/patch/10158145/
Cc: Felipe Balbi 
Cc: Eric Anholt 
Tested-by: Stefan Wahren 
Acked-by: Rob Herring 
Tested-by: Hans Verkuil 
Acked-by: Kishon Vijay Abraham I 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

phy: tegra: fix device-tree node lookups

2018-01-02T19:31:15+00:00

commit 046046737bd35bed047460f080ea47e186be731e upstream.

Fix child-node lookups during probe, which ended up searching the whole
device tree depth-first starting at the parents rather than just
matching on their children.

To make things worse, some parent nodes could end up being being
prematurely freed (by tegra_xusb_pad_register()) as
of_find_node_by_name() drops a reference to its first argument.

Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Cc: Thierry Reding 
Signed-off-by: Johan Hovold 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman