linux.git/drivers/phy, branch v6.6.118 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0 2025-11-24T09:29:36+00:00 Michael Riesch michael.riesch@collabora.com 2025-09-03T17:04:52+00:00 cedcc490241b1f8859dc8610bb539d3ffaec8233 [ Upstream commit 8c7c19466c854fa86b82d2148eaa9bf0e6531423 ] The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF this offset is perfectly fine (in fact, register 0 is the only one in this register file). Introduce a boolean variable to indicate valid registers and allow writes to register 0. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Michael Riesch <michael.riesch@collabora.com> Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8c7c19466c854fa86b82d2148eaa9bf0e6531423 ]

The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset
value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF
this offset is perfectly fine (in fact, register 0 is the only one in
this register file).
Introduce a boolean variable to indicate valid registers and allow writes
to register 0.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet 2025-11-24T09:29:36+00:00 Michael Dege michael.dege@renesas.com 2025-07-03T11:07:24+00:00 f0cc4b6c443aa3c773ccc6feba4ab5922b27394e [ Upstream commit e4a8db93b5ec9bca1cc66b295544899e3afd5e86 ] R-Car S4-8 datasheet Rev.1.20 describes some additional register settings at the end of the initialization. Signed-off-by: Michael Dege <michael.dege@renesas.com> Link: https://lore.kernel.org/r/20250703-renesas-serdes-update-v4-2-1db5629cac2b@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e4a8db93b5ec9bca1cc66b295544899e3afd5e86 ]

R-Car S4-8 datasheet Rev.1.20 describes some additional register
settings at the end of the initialization.

Signed-off-by: Michael Dege <michael.dege@renesas.com>
Link: https://lore.kernel.org/r/20250703-renesas-serdes-update-v4-2-1db5629cac2b@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: cadence: cdns-dphy: Enable lower resolutions in dphy 2025-11-24T09:29:36+00:00 Harikrishna Shenoy h-shenoy@ti.com 2025-08-07T05:20:02+00:00 cf6781d97c6969ed7d836d7492296ed6cf77c656 [ Upstream commit 43bd2c44515f8ee5c019ce6e6583f5640387a41b ] Enable support for data lane rates between 80-160 Mbps cdns dphy as mentioned in TRM [0] by setting the pll_opdiv field to 16. This change enables lower resolutions like 640x480 at 60Hz. [0]: https://www.ti.com/lit/zip/spruil1 (Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions) Reviewed-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com> Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 43bd2c44515f8ee5c019ce6e6583f5640387a41b ]

Enable support for data lane rates between 80-160 Mbps cdns dphy
as mentioned in TRM [0] by setting the pll_opdiv field to 16.
This change enables lower resolutions like 640x480 at 60Hz.

[0]: https://www.ti.com/lit/zip/spruil1
(Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions)

Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: cadence: cdns-dphy: Update calibration wait time for startup state machine 2025-10-23T14:16:42+00:00 Devarsh Thakkar devarsht@ti.com 2025-10-21T16:50:53+00:00 247d1fff85e0e456d0299cbb83c47be829880bdd [ Upstream commit 2c27aaee934a1b5229152fe33a14f1fdf50da143 ] Do read-modify-write so that we re-use the characterized reset value as specified in TRM [1] to program calibration wait time which defines number of cycles to wait for after startup state machine is in bandgap enable state. This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's AM62L and J721E SoC since earlier calibration wait time was getting overwritten to zero value thus failing the PLL to lockup and causing timeout. [1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2): Link: https://www.ti.com/lit/pdf/spruj83 Cc: stable@vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Tested-by: Harikrishna Shenoy <h-shenoy@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 2c27aaee934a1b5229152fe33a14f1fdf50da143 ]

Do read-modify-write so that we re-use the characterized reset value as
specified in TRM [1] to program calibration wait time which defines number
of cycles to wait for after startup state machine is in bandgap enable
state.

This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's
AM62L and J721E SoC since earlier calibration wait time was getting
overwritten to zero value thus failing the PLL to lockup and causing
timeout.

[1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2):
Link: https://www.ti.com/lit/pdf/spruj83

Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling 2025-10-23T14:16:40+00:00 Devarsh Thakkar devarsht@ti.com 2025-10-20T12:59:35+00:00 0af89c7e640a0452de8214947e1b97b972397116 [ Upstream commit 284fb19a3ffb1083c3ad9c00d29749d09dddb99c ] PLL lockup and O_CMN_READY assertion can only happen after common state machine gets enabled by programming DPHY_CMN_SSM register, but driver was polling them before the common state machine was enabled which is incorrect. This is as per the DPHY initialization sequence as mentioned in J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram". It shows O_CMN_READY polling at the end after common configuration pin setup where the common configuration pin setup step enables state machine as referenced in "Table 12-1533. Common Configuration-Related Setup mentions state machine" To fix this : - Add new function callbacks for polling on PLL lock and O_CMN_READY assertion. - As state machine and clocks get enabled in power_on callback only, move the clock related programming part from configure callback to power_on callback and poll for the PLL lockup and O_CMN_READY assertion after state machine gets enabled. - The configure callback only saves the PLL configuration received from the client driver which will be applied later on in power_on callback. - Add checks to ensure configure is called before power_on and state machine is in disabled state before power_on callback is called. - Disable state machine in power_off so that client driver can re-configure the PLL by following up a power_off, configure, power_on sequence. [1]: https://www.ti.com/lit/zip/spruil1 Cc: stable@vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Tested-by: Harikrishna Shenoy <h-shenoy@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 284fb19a3ffb1083c3ad9c00d29749d09dddb99c ]

PLL lockup and O_CMN_READY assertion can only happen after common state
machine gets enabled by programming DPHY_CMN_SSM register, but driver was
polling them before the common state machine was enabled which is
incorrect.  This is as per the DPHY initialization sequence as mentioned in
J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram".
It shows O_CMN_READY polling at the end after common configuration pin
setup where the common configuration pin setup step enables state machine
as referenced in "Table 12-1533. Common Configuration-Related Setup
mentions state machine"

To fix this :
- Add new function callbacks for polling on PLL lock and O_CMN_READY
  assertion.
- As state machine and clocks get enabled in power_on callback only, move
  the clock related programming part from configure callback to power_on
callback and poll for the PLL lockup and O_CMN_READY assertion after state
machine gets enabled.
- The configure callback only saves the PLL configuration received from the
  client driver which will be applied later on in power_on callback.
- Add checks to ensure configure is called before power_on and state
  machine is in disabled state before power_on callback is called.
- Disable state machine in power_off so that client driver can re-configure
  the PLL by following up a power_off, configure, power_on sequence.

[1]: https://www.ti.com/lit/zip/spruil1

Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: cdns-dphy: Store hs_clk_rate and return it 2025-10-23T14:16:40+00:00 Tomi Valkeinen tomi.valkeinen@ideasonboard.com 2025-10-20T12:59:34+00:00 3594108460db48fe24ac4430f9198beae0d70e6d [ Upstream commit 689a54acb56858c85de8c7285db82b8ae6dbf683 ] The DPHY driver does not return the actual hs_clk_rate, so the DSI driver has no idea what clock was actually achieved. Set the realized hs_clk_rate to the opts struct, so that the DSI driver gets it back. Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Tested-by: Parth Pancholi <parth.pancholi@toradex.com> Tested-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250723-cdns-dphy-hs-clk-rate-fix-v1-1-d4539d44cbe7@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 284fb19a3ffb ("phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 689a54acb56858c85de8c7285db82b8ae6dbf683 ]

The DPHY driver does not return the actual hs_clk_rate, so the DSI
driver has no idea what clock was actually achieved. Set the realized
hs_clk_rate to the opts struct, so that the DSI driver gets it back.

Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250723-cdns-dphy-hs-clk-rate-fix-v1-1-d4539d44cbe7@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 284fb19a3ffb ("phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: rockchip: naneng-combphy: Enable U3 OTG port for RK3568 2025-10-15T09:57:55+00:00 Jonas Karlman jonas@kwiboo.se 2025-07-23T07:23:22+00:00 8de227e62a53252bd1d29dc234900cd7528d9e9e [ Upstream commit 7bb14b61b7d03db770b7e8871493f5b9b2be2b79 ] The boot firmware may disable the U3 port early during boot and leave it up to the controller or PHY driver to re-enable U3 when needed. The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588, something the Rockchip Naneng Combo PHY driver never does for RK3568. This may result in USB 3.0 ports being limited to only using USB 2.0 or in special cases not working at all on RK3568. Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled when a PHY with PHY_TYPE_USB3 mode is used. Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7bb14b61b7d03db770b7e8871493f5b9b2be2b79 ]

The boot firmware may disable the U3 port early during boot and leave it
up to the controller or PHY driver to re-enable U3 when needed.

The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588,
something the Rockchip Naneng Combo PHY driver never does for RK3568.
This may result in USB 3.0 ports being limited to only using USB 2.0 or
in special cases not working at all on RK3568.

Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled
when a PHY with PHY_TYPE_USB3 mode is used.

Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
phy: ti: omap-usb2: fix device leak at unbind 2025-09-25T09:00:10+00:00 Johan Hovold johan@kernel.org 2025-09-17T13:18:07+00:00 27b04564f7a369dae72953f0d06753cf48ea877f [ Upstream commit 64961557efa1b98f375c0579779e7eeda1a02c42 ] Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 478b6c7436c2 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20250724131206.2211-3-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 64961557efa1b98f375c0579779e7eeda1a02c42 ]

Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.

Fixes: 478b6c7436c2 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org	# 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-3-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: Use device_get_match_data() 2025-09-25T09:00:10+00:00 Rob Herring robh@kernel.org 2025-09-17T13:18:06+00:00 34a8d5a198bb5cf7f7e1391d0d3525161fd1da5a [ Upstream commit 21bf6fc47a1e45031ba8a7084343b7cfd09ed1d3 ] Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20231009172923.2457844-15-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 21bf6fc47a1e45031ba8a7084343b7cfd09ed1d3 ]

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231009172923.2457844-15-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy: ti-pipe3: fix device leak at unbind 2025-09-19T14:32:08+00:00 Johan Hovold johan@kernel.org 2025-07-24T13:12:06+00:00 ce807c4c88d2ec427f0efd573b28a474929b309f commit e19bcea99749ce8e8f1d359f68ae03210694ad56 upstream. Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e19bcea99749ce8e8f1d359f68ae03210694ad56 upstream.

Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.

Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org	# 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>