Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Add a pin control (only multiplexing) driver for ep93xx SoC so we can fully convert ep93xx to device tree. This driver is capable of muxing ep9301/ep9302/ep9307/ep9312/ep9315 variants, this is chosen based on "compatible" in device tree. Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Immutable branch for the SoC tree, merge to pinctrl devel proper. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sophgo CV1800 series SoCs share common control logic but have different register mapping. For maintenance, split the driver and pin definition of the SoC. Add base driver for CV1800 series SoC and pin definition of CV1800B. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Link: https://lore.kernel.org/IA1PR20MB4953B260E04EC53F6A01EB30BBB32@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the Mobileye EyeQ5 pin controller driver. It belongs to a syscon region called OLB and gets spawned as auxiliary device to the platform driver for clock. Existing pins and their function live statically in the driver code rather than in the devicetree, see compatible match data. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/20240730-mbly-pinctrl-v2-2-d470f64e0395@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
scmi-pinctrl driver implements pinctrl driver interface and using SCMI protocol to redirect messages from pinctrl subsystem SDK to SCMI platform firmware, which does the changes in HW. Co-developed-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com> Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-4-499dca9864a7@nxp.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Awinic AW9523(B) is a multi-function I2C gpio expander in a TQFN-24L package, featuring PWM (max 37mA per pin, or total max power 3.2Watts) for LED driving capability. It has two ports with 8 pins per port (for a total of 16 pins), configurable as either PWM with 1/256 stepping or GPIO input/output, 1.8V logic input; each GPIO can be configured as input or output independently from each other. This IC also has an internal interrupt controller, which is capable of generating an interrupt for each GPIO, depending on the configuration, and will raise an interrupt on the INTN pin to advertise this to an external interrupt controller. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: David Bauer <mail@david-bauer.net> Link: https://lore.kernel.org/r/20210624214458.68716-2-mail@david-bauer.net Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240301-awinic-aw9523-v8-1-7ec572f5dfb4@linaro.org
Immutable tag for the PEF2256 framer
The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. This kind of component can be found in old telecommunication system. It was used to digital transmission of many simultaneous telephone calls by time-division multiplexing. Also using HDLC protocol, WAN networks can be reached through the framer. This pinmux support handles the pin muxing part (pins RP(A..D) and pins XP(A..D)) of the PEF2256. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231128132534.258459-5-herve.codina@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
TI TPS6594 PMIC has 11 GPIOs which can be used for different functions. This patch adds a pinctrl and GPIO drivers in order to use those functions. Signed-off-by: Esteban Blanc <eblanc@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20231108104124.2818275-1-eblanc@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>