linux.git/drivers/pinctrl/sunxi, branch v5.13.1

pinctrl: sunxi: Add support for the Allwinner H616-R pin controller

2021-01-21T21:15:46+00:00

There are only two pins left now, used to connect to the PMIC via I2C.

Signed-off-by: Andre Przywara 
Acked-by: Maxime Ripard 
Reviewed-by: Jernej Skrabec 
Link: https://lore.kernel.org/r/20210118020848.11721-6-andre.przywara@arm.com
Signed-off-by: Linus Walleij

pinctrl: sunxi: Add support for the Allwinner H616 pin controller

2021-01-21T21:14:18+00:00

Port A is used for an internal connection to some analogue circuitry
which looks like an AC200 IP (as in the H6), though this is not
mentioned in the manual.

Signed-off-by: Andre Przywara 
Acked-by: Maxime Ripard 
Link: https://lore.kernel.org/r/20210118020848.11721-5-andre.przywara@arm.com
Signed-off-by: Linus Walleij

pinctrl: sunxi: h6-r: Add s_rsb pin functions

2021-01-06T20:10:04+00:00

As there is an RSB controller in the H6 SoC, there should be some pin
configuration for it. While no such configuration is documented, the
"s_i2c" pins are suspiciously on the "alternate" function 3, with no
primary function 2 given. This suggests the primary function for these
pins is actually RSB, and that is indeed the case.

Add the "s_rsb" pin functions so the RSB controller can be used.

Signed-off-by: Samuel Holland 
Acked-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard 
Link: https://lore.kernel.org/r/20210103100007.32867-3-samuel@sholland.org
Signed-off-by: Linus Walleij

pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler

2020-11-24T08:41:29+00:00

It is found on many allwinner soc that there is a low probability that
the interrupt status cannot be read in sunxi_pinctrl_irq_handler. This
will cause the interrupt status of a gpio bank to always be active on
gic, preventing gic from responding to other spi interrupts correctly.

So we should call the chained_irq_* each time enter sunxi_pinctrl_irq_handler().

Signed-off-by: Yangtao Li 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/85263ce8b058e80cea25c6ad6383eb256ce96cc8.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij

pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON

2020-11-24T08:40:54+00:00

The interrupt descriptor cannot be found in the interrupt processing
function, and this situation cannot happen when the system is running
normally. It doesn't seem right to return directly to the status of not
handling gic. In this case, it must be a bug, let's mark it with
WARN_ON.

Signed-off-by: Yangtao Li 
Link: https://lore.kernel.org/r/470ebae22fc5434ad5409c4f6e29255467b3cef6.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij

pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller

2020-11-24T08:40:03+00:00

A100's pin starts with PB, so it should start with 1.

Fixes: 473436e7647d6 ("pinctrl: sunxi: add support for the Allwinner A100 pin controller")
Signed-off-by: Yangtao Li 
Link: https://lore.kernel.org/r/9db51667bf9065be55beafd56e5c319e3bbe8310.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij

pinctrl: sunxi: add support for the Allwinner A100 pin controller

2020-09-12T10:35:42+00:00

This commit introduces support for the pin controller on A100.

Signed-off-by: Yangtao Li 
Acked-by: Maxime Ripard 
Link: https://lore.kernel.org/r/4e331a2ed4a30c883df6157bc5c52bb686aa8e0d.1595572867.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij

pinctrl: sunxi: handle probe defferal

2020-04-16T08:23:02+00:00

When checking the logs on my sun8i-a33-olinuxino I saw:
sun8i-a23-r-pinctrl 1f02c00.pinctrl: Reset controller missing
but this driver was working after.
This message is just here because the reset controller was still not probed.
So don't say anything if the return code say to wait.

Signed-off-by: Corentin Labbe 
Link: https://lore.kernel.org/r/1585818532-23051-1-git-send-email-clabbe@baylibre.com
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Mask non-wakeup IRQs on suspend

2020-02-21T14:16:08+00:00

The pin controller hardware does not distinguish IRQs intended for
wakeup from other IRQs, so we must mask non-wakeup IRQs in software to
prevent inadvertent wakeups. This is accomplished at the irqchip level
via the IRQCHIP_MASK_ON_SUSPEND flag.

Signed-off-by: Samuel Holland 
Link: https://lore.kernel.org/r/20200117213340.47714-2-samuel@sholland.org
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij

pinctrl: sunxi: Forward calls to irq_set_irq_wake

2020-02-21T14:14:24+00:00

The pinctrl irqchip may be connected to an irqchip that implements the
.irq_set_wake callback, such as the R_INTC on A31 and newer sunxi SoCs.
In order for GPIOs to be able to trigger wakeup, the IRQ from the
pinctrl to the upper irqchip must also be enabled for wakeup. Since the
kernel's IRQ core already manages the "wake_depth" of each IRQ, no
additional accounting is needed in the pinctrl driver.

Signed-off-by: Samuel Holland 
Link: https://lore.kernel.org/r/20200117213340.47714-1-samuel@sholland.org
Acked-by: Maxime Ripard 
Signed-off-by: Linus Walleij