Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...

Pull bulk pin control changes from Linus Walleij:
 "This has been queued and tested for a while.  Lots of action here,
  like in the GPIO tree, embedded stuff like this is really hot now it
  seems.  Details in the signed tag.  I'm especially happy about the
  Qualcomm driver as it is used in such a huge subset of mobile handsets
  out there, and these platforms in general need better upstream support

   - New driver for the Qualcomm TLMM pin controller and its msm8x74
     subdriver.

   - New driver for the Broadcom Capri BCM281xx SoC.

   - New subdriver for the imx25 pin controller.

   - New subdriver for the Tegra124 pin controller.

   - Lock GPIO lines as IRQs for select combined pin control and GPIO
     drivers for baytrail and sirf.

   - Some semi-big refactorings and extenstions to the sirf driver.

   - Lots of patching, cleanup and fixing in the Renesas "PFC" driver
     and associated subdrivers as usual.  It is settling down a little
     bit now it seems.

   - Minor fixes and incremental updates here and there as usual"

* tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: sunxi: Honor GPIO output initial vaules
  pinctrl: capri: add dependency on OF
  ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs
  ARM: pinctrl: Add Broadcom Capri pinctrl driver
  pinctrl: Add pinctrl binding for Broadcom Capri SoCs
  pinctrl: Add void * to pinctrl_pin_desc
  pinctrl: st: Fix a typo in probe
  pinctrl: Fix some typos and grammar issues in the documentation
  pinctrl: sirf: lock IRQs when starting them
  pinctrl: sirf: put gpio interrupt pin into input status automatically
  pinctrl: sirf: use only one irq_domain for the whole device node
  pinctrl: single: fix infinite loop caused by bad mask
  pinctrl: single: fix pcs_disable with bits_per_mux
  pinctrl: single: fix DT bindings documentation
  pinctrl: as3722: Set pin to output mode for some function
  pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync
  pinctrl: sirf: fix the pins of sdmmc5 connected with TriG
  pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6
  pinctrl: sunxi: Add Allwinner A20 clock output pin functions
  pinctrl/lantiq: fix typo
  ...

Pull GPIO tree bulk changes from Linus Walleij:
 "A big set this merge window, as we have much going on in this
  subsystem.  The changes to other subsystems (notably a slew of ARM
  machines as I am doing away with their custom APIs) have all been
  ACKed to the extent possible.

  Major changes this time:

   - Some core improvements and cleanups to the new GPIO descriptor API.
     This seems to be working now so we can start the exodus to this
     API, moving gradually away from the global GPIO numberspace.

   - Incremental improvements to the ACPI GPIO core, and move the few
     GPIO ACPI clients we have to the GPIO descriptor API right *now*
     before we go any further.  We actually managed to contain this
     *before* we started to litter the kernel with yet another hackish
     global numberspace for the ACPI GPIOs, which is a big win.

   - The RFkill GPIO driver and all platforms using it have been
     migrated to use the GPIO descriptors rather than fixed number
     assignments.  Tegra machine has been migrated as part of this.

   - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x.  Those
     should be really good examples of how I expect a nice GPIO driver
     to look these days.

   - Do away with custom GPIO implementations on a major part of the ARM
     machines: ks8695, lpc32xx, mv78xx0.  Make a first step towards the
     same in the horribly convoluted Samsung S3C include forest.  We
     expect to continue to clean this up as we move forward.

   - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and
     lynxpoint.

     This makes the GPIOlib core aware that a certain GPIO line is used
     for IRQs and can then enforce some semantics such as disallowing a
     GPIO line marked as in use for IRQ to be switched to output mode.

   - Drop all use of irq_set_chip_and_handler_name().  The name provided
     in these cases were just unhelpful tags like "mux" or "demux".

   - Extend the MCP23s08 driver to handle interrupts.

   - Minor incremental improvements for rcar, lynxpoint, em 74x164 and
     msm drivers.

   - Some non-urgent bug fixes here and there, duplicate #includes and
     that usual kind of cleanups"

Fix up broken Kconfig file manually to make this all compile.

* tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
  gpio: mcp23s08: fix casting caused build warning
  gpio: mcp23s08: depend on OF_GPIO
  gpio: mcp23s08: Add irq functionality for i2c chips
  ARM: S5P[v210|c100|64x0]: Fix build error
  gpio: pxa: clamp gpio get value to [0,1]
  ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
  ARM: S3C[24|64]xx: move includes back under <mach/> scope
  Documentation / ACPI: update to GPIO descriptor API
  gpio / ACPI: get rid of acpi_gpio.h
  gpio / ACPI: register to ACPI events automatically
  mmc: sdhci-acpi: convert to use GPIO descriptor API
  ARM: s3c24xx: fix build error
  gpio: f7188x: set can_sleep attribute
  gpio: samsung: Update documentation
  gpio: samsung: Remove hardware.h inclusion
  gpio: xtensa: depend on HAVE_XTENSA_GPIO32
  gpio: clps711x: Enable driver compilation with COMPILE_TEST
  gpio: clps711x: Use of_match_ptr()
  net: rfkill: gpio: convert to descriptor-based GPIO interface
  leds: s3c24xx: Fix build failure
  ...

This deletes the special AB8500 GPIO platform data passing
header and merges the few remaining contents down into the
abx500 pinctrl driver which handles the abx500 GPIO device.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

All instances of this device are now coming from device tree-
enabled platforms probing without using platform data.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Some GPIO users, such as fixed-regulator, request GPIO output with
initial value of 1. This was ignored by sunxi driver.

Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This reverts commit f6308b36c411 (ACPI: Add BayTrail SoC GPIO and LPSS
ACPI IDs), because it causes the Alan Cox' ASUS T100TA to "crash and
burn" during boot if the Baytrail pinctrl driver is compiled in.

Fixes: f6308b36c411 (ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs)
Reported-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Requested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

As this driver is using pinconf_generic_dt_node_to_map_pin() it
needs to depend on OF so as not to cause build problems on
archs that do not support OF.

Cc: Sherman Yin <syin@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs.

v4: - PINCTRL selected in Kconfig, PINCTRL_CAPRI selected in bcm_defconfig
    - make use of regmap
    - change CAPRI_PIN_UPDATE from macro to inline function.
    - Handle pull-up strength arg in Ohm instead of enum
v3: Re-work driver to be based on generic pin config. Moved config selection
    from Kconfig to bcm_defconfig.
v2: Use hyphens instead of underscore in DT property names.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Christian Daudt <bcm@fixthebug.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>