linux.git/drivers/pinctrl, branch v5.10.194

pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}

2023-08-30T14:23:19+00:00

[ Upstream commit 8fcc1c40b747069644db6102c1d84c942c9d4d86 ]

The pinctrl group and function creation/remove calls expect
caller to take care of locking. Add lock around these functions.

Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Biju Das 
Reviewed-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20230815131558.33787-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin

pinctrl: amd: Use amd_pinconf_set() for all config options

2023-07-27T06:44:39+00:00

[ Upstream commit 635a750d958e158e17af0f524bedc484b27fbb93 ]

On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm.  This issue doesn't happen on
Windows.

Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.

```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
	 "\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{   // Pin list
0x0007
}
```

On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.

To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.

Reported-by: Nik P 
Reported-by: Nathan Schulte 
Reported-by: Friedrich Vock 
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Tested-by: Jan Visser 
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: amd: Only use special debounce behavior for GPIO 0

2023-07-27T06:44:25+00:00

commit 0d5ace1a07f7e846d0f6d972af60d05515599d0b upstream.

It's uncommon to use debounce on any other pin, but technically
we should only set debounce to 0 when working off GPIO0.

Cc: stable@vger.kernel.org
Tested-by: Jan Visser 
Fixes: 968ab9261627 ("pinctrl: amd: Detect internal GPIO0 debounce handling")
Signed-off-by: Mario Limonciello 
Link: https://lore.kernel.org/r/20230705133005.577-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: amd: Detect internal GPIO0 debounce handling

2023-07-27T06:44:25+00:00

commit 968ab9261627fa305307e3935ca1a32fcddd36cb upstream.

commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100.  Offset 0xFC is actually `WAKE_INT_MASTER_REG`.  This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.

commit b26cd9325be4 ("pinctrl: amd: Disable and mask interrupts on resume")
actually fixed this bug, but lead to regressions on Lenovo Z13 and some
other systems.  This is because there was no handling in the driver for bit
15 debounce behavior.

Quoting a public BKDG:
```
EnWinBlueBtn. Read-write. Reset: 0. 0=GPIO0 detect debounced power button;
Power button override is 4 seconds. 1=GPIO0 detect debounced power button
in S3/S5/S0i3, and detect "pressed less than 2 seconds" and "pressed 2~10
seconds" in S0; Power button override is 10 seconds
```

Cross referencing the same master register in Windows it's obvious that
Windows doesn't use debounce values in this configuration.  So align the
Linux driver to do this as well.  This fixes wake on lid when
WAKE_INT_MASTER_REG is properly programmed.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello 
Link: https://lore.kernel.org/r/20230421120625.3366-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: amd: Fix mistake in handling clearing pins at startup

2023-07-27T06:44:25+00:00

commit a855724dc08b8cb0c13ab1e065a4922f1e5a7552 upstream.

commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100.  Offset 0xFC is actually `WAKE_INT_MASTER_REG`.  This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello 
Link: https://lore.kernel.org/r/20230421120625.3366-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

pinctrl: at91-pio4: check return value of devm_kasprintf()

2023-07-27T06:43:58+00:00

[ Upstream commit f6fd5d4ff8ca0b24cee1af4130bcb1fa96b61aa0 ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks")
Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int")
Signed-off-by: Claudiu Beznea 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20230615105333.585304-4-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: cherryview: Return correct value if pin in push-pull mode

2023-07-27T06:43:57+00:00

[ Upstream commit 5835196a17be5cfdcad0b617f90cf4abe16951a4 ]

Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.

Fixes: ccdf81d08dbe ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Acked-by: Mika Westerberg 
Signed-off-by: Andy Shevchenko 
Signed-off-by: Sasha Levin

pinctrl: bcm2835: Handle gpiochip_add_pin_range() errors

2023-07-27T06:43:56+00:00

[ Upstream commit cdf7e616120065007687fe1df0412154f259daec ]

gpiochip_add_pin_range() can fail, so better return its error code than
a hard coded '0'.

Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Christophe JAILLET 
Link: https://lore.kernel.org/r/98c3b5890bb72415145c9fe4e1d974711edae376.1681681402.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

pinctrl: meson-axg: add missing GPIOA_18 gpio group

2023-06-14T09:09:54+00:00

commit 5b10ff013e8a57f8845615ac2cc37edf7f6eef05 upstream.

Without this, the gpio cannot be explicitly mux'ed to its gpio function.

Fixes: 83c566806a68a ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Hundebøll 
Reviewed-by: Neil Armstrong 
Reviewed-by: Dmitry Rokosov 
Link: https://lore.kernel.org/r/20230512064925.133516-1-martin@geanix.com
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

Revert "pinctrl: amd: Disable and mask interrupts on resume"

2023-04-20T10:10:24+00:00

commit 534e465845ebfb4a97eb5459d3931a0b35e3b9a5 upstream.

This reverts commit b26cd9325be4c1fcd331b77f10acb627c560d4d7.

This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button

Signed-off-by: Kornel Dulęba 
Reviewed-by: Mario Limonciello 
Link: https://lore.kernel.org/r/20230411134932.292287-1-korneld@chromium.org
Signed-off-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman