linux.git/drivers/platform, branch v4.19.205

platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()

2021-07-20T14:15:46+00:00

[ Upstream commit 28e367127718a9cb85d615a71e152f7acee41bfc ]

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'error'.

Eliminate the follow smatch warning:

drivers/platform/x86/toshiba_acpi.c:2834 toshiba_acpi_setup_keyboard()
warn: missing error code 'error'.

Reported-by: Abaci Robot 
Signed-off-by: Jiapeng Chong 
Link: https://lore.kernel.org/r/1622628348-87035-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI

2021-06-03T06:38:10+00:00

[ Upstream commit bc1eca606d8084465e6f89fd646cc71defbad490 ]

The intel_punit_ipc driver might be compiled as a module.
When udev handles the event of the devices appearing
the intel_punit_ipc module is missing.

Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.

Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: hp-wireless: add AMD's hardware id to the supported list

2021-06-03T06:38:10+00:00

[ Upstream commit f048630bdd55eb5379ef35f971639fe52fabe499 ]

Newer AMD based laptops uses AMDI0051 as the hardware id to support the
airplane mode button. Adding this to the supported list.

Signed-off-by: Shyam Sundar S K 
Link: https://lore.kernel.org/r/20210514180047.1697543-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: hp_accel: Avoid invoking _INI to speed up resume

2021-06-03T06:38:09+00:00

[ Upstream commit 79d341e26ebcdbc622348aaaab6f8f89b6fdb25f ]

hp_accel can take almost two seconds to resume on some HP laptops.

The bottleneck is on evaluating _INI, which is only needed to run once.

Resolve the issue by only invoking _INI when it's necessary. Namely, on
probe and on hibernation restore.

Signed-off-by: Kai-Heng Feng 
Acked-by: Éric Piel 
Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios

2021-05-26T09:48:32+00:00

[ Upstream commit 3a53587423d25c87af4b4126a806a0575104b45e ]

init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:

[  175.722921] ------------[ cut here ]------------
[  175.722925] Unexpected driver unregister!
[  175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40
...
[  175.723089] Call Trace:
[  175.723094]  cleanup_module+0x5/0xedd [dell_smbios]
...
[  175.723148] ---[ end trace 064c34e1ad49509d ]---

Make the unregister happen on the same condition the register happens
to fix this.

Cc: Mario Limonciello 
Fixes: 1a258e670434 ("platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver")
Signed-off-by: Hans de Goede 
Reviewed-by: Mario Limonciello 
Reviewed-by: Mark Gross 
Link: https://lore.kernel.org/r/20210518125027.21824-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin

platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table

2021-05-22T08:59:32+00:00

[ Upstream commit d21e5abd3a005253eb033090aab2e43bce090d89 ]

pmc_plt_clk* clocks are used for ethernet controllers, so need to stay
turned on. This adds the affected board family to critclk_systems DMI
table, so the clocks are marked as CLK_CRITICAL and not turned off.

This replaces the previously listed boards with a match for the whole
device family CBxx63. CBxx63 matches only baytrail devices.
There are new affected boards that would otherwise need to be listed.
There are unaffected boards in the family, but having the clocks
turned on is not an issue.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reviewed-by: Andy Shevchenko 
Signed-off-by: Steffen Dirkwinkel 
Link: https://lore.kernel.org/r/20210412133006.397679-1-linux-kernel-dev@beckhoff.com
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: thinkpad_acpi: Correct thermal sensor allocation

2021-05-07T08:49:25+00:00

commit 6759e18e5cd8745a5dfc5726e4a3db5281ec1639 upstream.

On recent Thinkpad platforms it was reported that temp sensor 11 was
always incorrectly displaying 66C. It turns out the reason for this is
that this location in EC RAM is not a temperature sensor but is the
power supply ID (offset 0xC2).

Based on feedback from the Lenovo firmware team the EC RAM version can
be determined and for the current version (3) only the 0x78 to 0x7F
range is used for temp sensors. I don't have any details for earlier
versions so I have left the implementation unaltered there.

Note - in this block only 0x78 and 0x79 are officially designated (CPU &
GPU sensors). The use of the other locations in the block will vary from
platform to platform; but the existing logic to detect a sensor presence
holds.

Signed-off-by: Mark Pearson 
Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede 
Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

platform/x86: thinkpad_acpi: Allow the FnLock LED to change state

2021-04-10T11:21:18+00:00

[ Upstream commit 3d677f12ea3a2097a16ded570623567403dea959 ]

On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.

With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.

This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.

The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.

Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015

Signed-off-by: Esteve Varela Colominas 
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2

2021-04-10T11:21:18+00:00

[ Upstream commit 56678a5f44ef5f0ad9a67194bbee2280c6286534 ]

Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.

Signed-off-by: Alban Bedel 
Tested-by: Alexander Kobel 
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede 
Signed-off-by: Sasha Levin

platform/x86: intel-vbtn: Stop reporting SW_DOCK events

2021-03-30T12:36:59+00:00

commit 538d2dd0b9920334e6596977a664e9e7bac73703 upstream.

Stop reporting SW_DOCK events because this breaks suspend-on-lid-close.

SW_DOCK should only be reported for docking stations, but all the DSDTs in
my DSDT collection which use the intel-vbtn code, always seem to use this
for 2-in-1s / convertibles and set SW_DOCK=1 when in laptop-mode (in tandem
with setting SW_TABLET_MODE=0).

This causes userspace to think the laptop is docked to a port-replicator
and to disable suspend-on-lid-close, which is undesirable.

Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.

Note this may theoretically cause us to stop reporting SW_DOCK on some
device where the 0xCA and 0xCB intel-vbtn events are actually used for
reporting docking to a classic docking-station / port-replicator but
I'm not aware of any such devices.

Also the most important thing is that we only report SW_DOCK when it
reliably reports being docked to a classic docking-station without any
false positives, which clearly is not the case here. If there is a
chance of reporting false positives then it is better to not report
SW_DOCK at all.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20210321163513.72328-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman