<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/platform, branch v4.19.258</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask</title>
<updated>2022-09-15T10:17:02+00:00</updated>
<author>
<name>Andy Shevchenko</name>
<email>andriy.shevchenko@linux.intel.com</email>
</author>
<published>2022-08-01T11:37:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=bb522b1384c0b61b0a75c14a55c78ac4b1622b5b'/>
<id>bb522b1384c0b61b0a75c14a55c78ac4b1622b5b</id>
<content type='text'>
[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ]

On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).

Fix the mask and other related definitions accordingly.

Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ]

On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).

Fix the mask and other related definitions accordingly.

Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/olpc: Fix uninitialized data in debugfs write</title>
<updated>2022-08-25T09:15:18+00:00</updated>
<author>
<name>Dan Carpenter</name>
<email>dan.carpenter@oracle.com</email>
</author>
<published>2022-07-20T18:23:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b59004aa302eaecd7f5501bd85c7821a0eff85ad'/>
<id>b59004aa302eaecd7f5501bd85c7821a0eff85ad</id>
<content type='text'>
[ Upstream commit 40ec787e1adf302c11668d4cc69838f4d584187d ]

The call to:

	size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);

will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written.  Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.

Inintialize the struct to zero to prevent reading uninitialized stack
data.

Debugfs is normally only writable by root so the impact of this bug is
very minimal.

Fixes: 6cca83d498bd ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 40ec787e1adf302c11668d4cc69838f4d584187d ]

The call to:

	size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);

will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written.  Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.

Inintialize the struct to zero to prevent reading uninitialized stack
data.

Debugfs is normally only writable by root so the impact of this bug is
very minimal.

Fixes: 6cca83d498bd ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter &lt;dan.carpenter@oracle.com&gt;
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: hp-wmi: Ignore Sanitization Mode event</title>
<updated>2022-07-21T19:09:30+00:00</updated>
<author>
<name>Kai-Heng Feng</name>
<email>kai.heng.feng@canonical.com</email>
</author>
<published>2022-06-28T12:37:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=78eff1f735966fc4e0510046fd9e52f7828f617c'/>
<id>78eff1f735966fc4e0510046fd9e52f7828f617c</id>
<content type='text'>
[ Upstream commit 9ab762a84b8094540c18a170e5ddd6488632c456 ]

After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0

According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.

Cc: Jorge Lopez &lt;jorge.lopez2@hp.com&gt;
Signed-off-by: Kai-Heng Feng &lt;kai.heng.feng@canonical.com&gt;
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9ab762a84b8094540c18a170e5ddd6488632c456 ]

After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0

According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.

Cc: Jorge Lopez &lt;jorge.lopez2@hp.com&gt;
Signed-off-by: Kai-Heng Feng &lt;kai.heng.feng@canonical.com&gt;
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative</title>
<updated>2022-04-27T11:39:43+00:00</updated>
<author>
<name>Jiapeng Chong</name>
<email>jiapeng.chong@linux.alibaba.com</email>
</author>
<published>2022-03-22T06:18:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=10073a95f02c0bf3aa88c63449ba40b0597bd2b1'/>
<id>10073a95f02c0bf3aa88c63449ba40b0597bd2b1</id>
<content type='text'>
[ Upstream commit 0284d4d1be753f648f28b77bdfbe6a959212af5c ]

Eliminate the follow smatch warnings:

drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned
'value' is never less than zero.

Reported-by: Abaci Robot &lt;abaci@linux.alibaba.com&gt;
Signed-off-by: Jiapeng Chong &lt;jiapeng.chong@linux.alibaba.com&gt;
Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0284d4d1be753f648f28b77bdfbe6a959212af5c ]

Eliminate the follow smatch warnings:

drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned
'value' is never less than zero.

Reported-by: Abaci Robot &lt;abaci@linux.alibaba.com&gt;
Signed-off-by: Jiapeng Chong &lt;jiapeng.chong@linux.alibaba.com&gt;
Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: apple-gmux: use resource_size() with res</title>
<updated>2022-01-05T11:34:58+00:00</updated>
<author>
<name>Wang Qing</name>
<email>wangqing@vivo.com</email>
</author>
<published>2021-12-14T12:18:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=451dcbd4a94e7457045bd9e4ea8ef8347df028f6'/>
<id>451dcbd4a94e7457045bd9e4ea8ef8347df028f6</id>
<content type='text'>
[ Upstream commit eb66fb03a727cde0ab9b1a3858de55c26f3007da ]

This should be (res-&gt;end - res-&gt;start + 1) here actually,
use resource_size() derectly.

Signed-off-by: Wang Qing &lt;wangqing@vivo.com&gt;
Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit eb66fb03a727cde0ab9b1a3858de55c26f3007da ]

This should be (res-&gt;end - res-&gt;start + 1) here actually,
use resource_size() derectly.

Signed-off-by: Wang Qing &lt;wangqing@vivo.com&gt;
Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep</title>
<updated>2021-12-08T07:50:11+00:00</updated>
<author>
<name>Slark Xiao</name>
<email>slark_xiao@163.com</email>
</author>
<published>2021-11-08T06:06:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=ad790bfe941fa9a06cdb751520692f84b6d8474c'/>
<id>ad790bfe941fa9a06cdb751520692f84b6d8474c</id>
<content type='text'>
[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ]

When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
by command 'nmcli r wwan' or 'rfkill list'.

Issue analysis as below:
  When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
  In patch V2, Hans said 'sw_state should be unchanged
after a suspend/resume. It's better to drop the
tpacpi_rfk_update_swstate call all together from the
resume path'.
  And it's confimed by Lenovo that GWAN is no longer
 available from WHL generation because the design does not
 match with current pin control.

Signed-off-by: Slark Xiao &lt;slark_xiao@163.com&gt;
Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ]

When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
by command 'nmcli r wwan' or 'rfkill list'.

Issue analysis as below:
  When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
  In patch V2, Hans said 'sw_state should be unchanged
after a suspend/resume. It's better to drop the
tpacpi_rfk_update_swstate call all together from the
resume path'.
  And it's confimed by Lenovo that GWAN is no longer
 available from WHL generation because the design does not
 match with current pin control.

Signed-off-by: Slark Xiao &lt;slark_xiao@163.com&gt;
Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'</title>
<updated>2021-11-26T10:36:22+00:00</updated>
<author>
<name>Christophe JAILLET</name>
<email>christophe.jaillet@wanadoo.fr</email>
</author>
<published>2021-11-07T19:57:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=337f79a1c64ed2006a6882c535ed5468270abe74'/>
<id>337f79a1c64ed2006a6882c535ed5468270abe74</id>
<content type='text'>
[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]

If 'led_classdev_register()' fails, some additional resources should be
released.

Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.

Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]

If 'led_classdev_register()' fails, some additional resources should be
released.

Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.

Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning</title>
<updated>2021-11-26T10:36:10+00:00</updated>
<author>
<name>Nathan Chancellor</name>
<email>nathan@kernel.org</email>
</author>
<published>2021-10-18T18:25:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=12927fb3444d10874f41c67684a29e08d08dfc82'/>
<id>12927fb3444d10874f41c67684a29e08d08dfc82</id>
<content type='text'>
[ Upstream commit fd96e35ea7b95f1e216277805be89d66e4ae962d ]

A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:

drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
        else if ((strlencmp(cmd, "level disengaged") == 0) |
                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                                           ||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.

This should clearly be a logical OR so change it to fix the warning.

Fixes: fe98a52ce754 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic &lt;torvic9@mailbox.org&gt;
Signed-off-by: Nathan Chancellor &lt;nathan@kernel.org&gt;
Reviewed-by: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Link: https://lore.kernel.org/r/20211018182537.2316800-1-nathan@kernel.org
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit fd96e35ea7b95f1e216277805be89d66e4ae962d ]

A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:

drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
        else if ((strlencmp(cmd, "level disengaged") == 0) |
                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                                           ||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.

This should clearly be a logical OR so change it to fix the warning.

Fixes: fe98a52ce754 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic &lt;torvic9@mailbox.org&gt;
Signed-off-by: Nathan Chancellor &lt;nathan@kernel.org&gt;
Reviewed-by: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Link: https://lore.kernel.org/r/20211018182537.2316800-1-nathan@kernel.org
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: wmi: do not fail if disabling fails</title>
<updated>2021-11-26T10:36:04+00:00</updated>
<author>
<name>Barnabás Pőcze</name>
<email>pobrn@protonmail.com</email>
</author>
<published>2021-09-04T17:56:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=ac414eb5670e343c8792911d1cb0f9559d8aa924'/>
<id>ac414eb5670e343c8792911d1cb0f9559d8aa924</id>
<content type='text'>
[ Upstream commit 1975718c488a39128f1f515b23ae61a5a214cc3d ]

Previously, `__query_block()` would fail if the
second WCxx method call failed. However, the
WQxx method might have succeeded, and potentially
allocated memory for the result. Instead of
throwing away the result and potentially
leaking memory, ignore the result of
the second WCxx call.

Signed-off-by: Barnabás Pőcze &lt;pobrn@protonmail.com&gt;
Link: https://lore.kernel.org/r/20210904175450.156801-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 1975718c488a39128f1f515b23ae61a5a214cc3d ]

Previously, `__query_block()` would fail if the
second WCxx method call failed. However, the
WQxx method might have succeeded, and potentially
allocated memory for the result. Instead of
throwing away the result and potentially
leaking memory, ignore the result of
the second WCxx call.

Signed-off-by: Barnabás Pőcze &lt;pobrn@protonmail.com&gt;
Link: https://lore.kernel.org/r/20210904175450.156801-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>platform/x86: intel_scu_ipc: Update timeout value in comment</title>
<updated>2021-10-27T07:53:15+00:00</updated>
<author>
<name>Prashant Malani</name>
<email>pmalani@chromium.org</email>
</author>
<published>2021-09-28T10:19:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=f7db1bc1cdb809fdd65d50485fb67bd418eadbd5'/>
<id>f7db1bc1cdb809fdd65d50485fb67bd418eadbd5</id>
<content type='text'>
[ Upstream commit a0c5814b9933f25ecb6de169483c5b88cf632bca ]

The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .

Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.

Signed-off-by: Prashant Malani &lt;pmalani@chromium.org&gt;
Cc: Benson Leung &lt;bleung@chromium.org&gt;
Reviewed-by: Mika Westerberg &lt;mika.westerberg@linux.intel.com&gt;
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit a0c5814b9933f25ecb6de169483c5b88cf632bca ]

The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .

Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.

Signed-off-by: Prashant Malani &lt;pmalani@chromium.org&gt;
Cc: Benson Leung &lt;bleung@chromium.org&gt;
Reviewed-by: Mika Westerberg &lt;mika.westerberg@linux.intel.com&gt;
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
