linux.git/drivers/pps, branch v5.13.4

Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-04-26T18:20:10+00:00

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.13-rc1.

  Actually busy this release, with a number of cleanups happening:

   - much needed core tty cleanups by Jiri Slaby

   - removal of unused and orphaned old-style serial drivers. If anyone
     shows up with this hardware, it is trivial to restore these but we
     really do not think they are in use anymore.

   - fixes and cleanups from Johan Hovold on a number of termios setting
     corner cases that loads of drivers got wrong as well as removing
     unneeded code due to tty core changes from long ago that were never
     propagated out to the drivers

   - loads of platform-specific serial port driver updates and fixes

   - coding style cleanups and other small fixes and updates all over
     the tty/serial tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  serial: extend compile-test coverage
  serial: stm32: add FIFO threshold configuration
  dt-bindings: serial: 8250: update TX FIFO trigger level
  dt-bindings: serial: stm32: override FIFO threshold properties
  dt-bindings: serial: add RX and TX FIFO properties
  serial: xilinx_uartps: drop low-latency workaround
  serial: vt8500: drop low-latency workaround
  serial: timbuart: drop low-latency workaround
  serial: sunsu: drop low-latency workaround
  serial: sifive: drop low-latency workaround
  serial: txx9: drop low-latency workaround
  serial: sa1100: drop low-latency workaround
  serial: rp2: drop low-latency workaround
  serial: rda: drop low-latency workaround
  serial: owl: drop low-latency workaround
  serial: msm_serial: drop low-latency workaround
  serial: mpc52xx_uart: drop low-latency workaround
  serial: meson: drop low-latency workaround
  serial: mcf: drop low-latency workaround
  serial: lpc32xx_hs: drop low-latency workaround
  ...

pps: clients: gpio: Rearrange optional stuff in pps_gpio_setup()

2021-03-24T07:26:32+00:00

Rearrange optional stuff in pps_gpio_setup() so it will go after mandatory one
and with reduced indentation. This will increase readability of the sources.

Acked-by: Rodolfo Giometti 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210318130321.24227-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

pps: clients: gpio: Use struct device pointer directly

2021-03-24T07:26:32+00:00

In most parts of the code the platform device is not used.
Use struct device pointer directly to reduce code size and
increase readability.

Acked-by: Rodolfo Giometti 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210318130321.24227-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

pps: clients: gpio: Make use of device properties

2021-03-24T07:26:32+00:00

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Acked-by: Rodolfo Giometti 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210318130321.24227-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

pps: clients: gpio: Get rid of legacy platform data

2021-03-24T07:26:32+00:00

Platform data is a legacy interface to supply device properties
to the driver. In this case we even don't have in-kernel users
for it. Just remove it for good.

Acked-by: Rodolfo Giometti 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210318130321.24227-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

pps: clients: gpio: Remove redundant condition in ->remove()

2021-03-24T07:26:31+00:00

The timer along with GPIO API are NULL-aware, there is no need to test
against existing GPIO echo line.

Acked-by: Rodolfo Giometti 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210318130321.24227-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

pps: clients: gpio: Use dev_err_probe() to avoid log noise

2021-03-24T07:26:31+00:00

When GPIO APIs return -EPROBE_DEFER there is no need to print the message,
especially taking into consideration that it may repeat several times.
Use dev_err_probe() to avoid log noise in such cases.

Acked-by: Rodolfo Giometti 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210318130321.24227-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

pps: clients: gpio: Bail out on error when requesting GPIO echo line

2021-03-24T07:26:31+00:00

When requesting optional GPIO echo line, bail out on error,
so user will know that something wrong with the existing property.

Acked-by: Rodolfo Giometti 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210318130321.24227-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

tty: remove TTY_LDISC_MAGIC

2021-03-10T08:34:06+00:00

First, it is never checked. Second, use of it as a debugging aid is
at least questionable. With the current tools, I don't think anyone used
this kind of thing for debugging purposes for years.

On the top of that, e.g. serdev does not set this field of tty_ldisc_ops
at all.

So get rid of this legacy.

Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210302062214.29627-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada