The MT6315 is a regulator found on boards based on MediaTek MT8192 and probably other SoCs. It connects as a slave to SoC using SPMI. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Link: https://lore.kernel.org/r/1612678457-11548-3-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210120151307.1726876-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Driver for regulators exposed by the DVFSRC (dynamic voltage and frequency scaling resource collector) found in devices based on mt8183 and newer platforms. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Link: https://lore.kernel.org/r/1608790134-27425-12-git-send-email-henryc.chen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the DC-DC converters and LDO regulators found in the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x family of PMICs. Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/1117b1a01b3948446cb3cc407e52de3a5d4212b0.1609258905.git.cristian.ciocaltea@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Adds support for Richtek RT4831 DSV Regulator Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1608217244-314-6-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add NXP PF8100/PF8121A/PF8200 regulator driver. PF8100/PF8121A/PF8200 is PMIC designed for highperformance consumer applications. It features seven high efficiency buck, four linear and one vsnvs regulators. Tested in Engicam i.Core MX8M Mini SOM platform boards. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20201130112329.104614-2-jagan@amarulasolutions.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add a simple regulator based on SCMI Voltage Domain Protocol. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> ---- v6 --> v7 - add proper blank lines between semantic blocks - fix return value on error path of scmi_reg_is_enabled() - use generic Failure message on err path of info_get() - fix comment containing apostrophe v3 --> v4 - using of_match_full_name core regulator flag - avoid coccinelle falde complaints about pointer-sized allocations v2 --> v3 - remove multiple linear mappings support - removed duplicated voltage name printout - added a few comments - simplified return path in scmi_reg_set_voltage_sel() v1 --> v2 - removed duplicate regulator naming - removed redundant .get/set_voltage ops: only _sel variants implemented - removed condexpr on fail path to increase readability v0 --> v1 - fixed init_data constraint parsing - fixes for v5.8 (linear_range.h) - fixed commit message content and subject line format - factored out SCMI core specific changes to distinct patch - reworked Kconfig and Makefile to keep proper alphabetic order - fixed SPDX comment style - removed unneeded inline functions - reworked conditionals for legibility - fixed some return paths to properly report SCMI original errors codes - added some more descriptive error messages when fw returns invalid ranges - removed unneeded explicit devm_regulator_unregister from .remove() Link: https://lore.kernel.org/r/20201123202336.46701-4-cristian.marussi@arm.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Dialog Semiconductor DA9121, a single-channel dual-phase buck converter controlled via I2C. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20201103100021.19603-3-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Richtek RTMV20 load switch regulator. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1601277584-5526-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Initial support for ROHM BD9576MUF and BD9573MUF PMICs. These PMICs are primarily intended to be used to power the R-Car family processors. BD9576MUF includes some additional safety features the BD9573MUF does not have. This initial version of drivers does not utilize these features and for now the SW behaviour is identical. Please note that this version of drivers is only tested on BD9576MUF but according to the data-sheets the relevant parts of registers should be same so drivers should also work on BD9573MUF. This patch series includes MFD, watchdog and regulator drivers with basic functionality such as: - Enabling and pinging the watchdog - configuring watchog timeout / window from device-tree - reading regulator states/voltages - enabling/disabling VOUT1 (VD50) when control mode B is used. This patch series does not bring interrupt support. BD9576MUF and BD9573MUF are designed to keep the IRQ line low for whole duration of error condition. IRQ can't be 'acked'. So proper IRQ support would require some IRQ limiter implementation (delayed unmask?) in order to not hog the CPU. --- Matti Vaittinen (6): dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs mfd: Support ROHM BD9576MUF and BD9573MUF wdt: Support wdt on ROHM BD9576MUF and BD9573MUF regulator: Support ROHM BD9576MUF and BD9573MUF MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers .../bindings/mfd/rohm,bd9576-pmic.yaml | 129 +++++++ .../regulator/rohm,bd9576-regulator.yaml | 33 ++ MAINTAINERS | 4 + drivers/mfd/Kconfig | 11 + drivers/mfd/Makefile | 1 + drivers/mfd/rohm-bd9576.c | 130 +++++++ drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/bd9576-regulator.c | 337 ++++++++++++++++++ drivers/watchdog/Kconfig | 13 + drivers/watchdog/Makefile | 1 + drivers/watchdog/bd9576_wdt.c | 295 +++++++++++++++ include/linux/mfd/rohm-bd957x.h | 61 ++++ include/linux/mfd/rohm-generic.h | 2 + 14 files changed, 1028 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml create mode 100644 drivers/mfd/rohm-bd9576.c create mode 100644 drivers/regulator/bd9576-regulator.c create mode 100644 drivers/watchdog/bd9576_wdt.c create mode 100644 include/linux/mfd/rohm-bd957x.h base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822 -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]