linux.git/drivers/rtc/dev.c, branch v6.18.21

treewide, timers: Rename from_timer() to timer_container_of()

2025-06-08T07:07:37+00:00

Move this API to the canonical timer_*() namespace.

[ tglx: Redone against pre rc1 ]

Signed-off-by: Ingo Molnar 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12+00:00

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner 
Signed-off-by: Ingo Molnar

[tree-wide] finally take no_llseek out

2024-09-27T15:18:43+00:00

no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")

To quote that commit,

  At -rc1 we'll need do a mechanical removal of no_llseek -

  git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\/d' $i
  done

  would do it.

Unfortunately, that hadn't been done.  Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
	.llseek = no_llseek,
so it's obviously safe.

Signed-off-by: Al Viro 
Signed-off-by: Linus Torvalds

rtc: Remove unused rtc_dev_exit().

2022-06-24T19:24:02+00:00

Commit 270a3bd6bdc21407 ("rtc: make class.c explicitly non-modular")
removed rtc_dev_exit() call.

Signed-off-by: Tetsuo Handa 
Signed-off-by: Alexandre Belloni 
Link: https://lore.kernel.org/r/1e2f9a99-435d-e149-7456-dfacd53be85a@I-love.SAKURA.ne.jp

rtc: Replace flush_scheduled_work() with flush_work().

2022-06-24T19:24:02+00:00

Since "struct rtc_device" is per a device struct, I assume that clear_uie()
needs to wait for only one work associated with that device. Therefore,
wait for only that work using flush_work().

Signed-off-by: Tetsuo Handa 
Signed-off-by: Alexandre Belloni 
Link: https://lore.kernel.org/r/8d3a0f55-d861-ba93-0d25-b1172eaa8343@I-love.SAKURA.ne.jp

rtc: Move variable into switch case statement

2022-01-05T00:03:09+00:00

When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:

drivers/rtc/dev.c: In function 'rtc_dev_ioctl':
drivers/rtc/dev.c:394:30: warning: statement will never be executed [-Wswitch-unreachable]
  394 |                         long offset;
      |                              ^~~~~~

Fixes: 6a8af1b6568a ("rtc: add parameter ioctl")
Signed-off-by: Kees Cook 
Reviewed-by: Gustavo A. R. Silva 
Signed-off-by: Alexandre Belloni 
Link: https://lore.kernel.org/r/20211209043915.1378393-1-keescook@chromium.org

rtc: add BSM parameter

2021-10-18T15:20:50+00:00

BSM or Backup Switch Mode is a common feature on RTCs, allowing to select
how the RTC will decide when to switch from its primary power supply to the
backup power supply. It is necessary to be able to set it from userspace as
there are uses cases where it has to be done dynamically.

Supported values are:
  RTC_BSM_DISABLED: disabled
  RTC_BSM_DIRECT: switching will happen as soon as Vbackup > Vdd
  RTC_BSM_LEVEL: switching will happen around a threshold, usually with an
  hysteresis
  RTC_BSM_STANDBY: switching will not happen until Vdd > Vbackup, this is
  useful to ensure the RTC doesn't draw any power until the device is first
  powered on.

Signed-off-by: Alexandre Belloni 
Link: https://lore.kernel.org/r/20211018151933.76865-6-alexandre.belloni@bootlin.com

rtc: add correction parameter

2021-10-18T15:20:50+00:00

Add a new parameter allowing the get and set the correction using ioctls
instead of just sysfs.

Signed-off-by: Alexandre Belloni 
Link: https://lore.kernel.org/r/20211018151933.76865-5-alexandre.belloni@bootlin.com

rtc: add parameter ioctl

2021-10-18T15:20:50+00:00

Add an ioctl allowing to get and set extra parameters for an RTC. For now,
only handle getting available features.

Signed-off-by: Alexandre Belloni 
Link: https://lore.kernel.org/r/20211018151933.76865-3-alexandre.belloni@bootlin.com

compat_ioctl: move rtc handling into drivers/rtc/dev.c

2019-10-23T15:23:43+00:00

We no longer need the rtc compat handling to be in common code, now that
all drivers are either moved to the rtc-class framework, or (rarely)
exist in drivers/char for architectures without compat mode (m68k,
alpha and ia64, respectively).

I checked the list of ioctl commands in drivers, and the ones that are
not already handled are all compatible, again with the one exception of
m68k driver, which implements RTC_PLL_GET and RTC_PLL_SET, but has no
compat mode.

Unlike earlier versions of this patch, I'm now adding a separate
compat_ioctl handler that takes care of RTC_IRQP_READ32/RTC_IRQP_SET32
and treats all other commands as compatible, leaving the native
behavior unchanged.

The old conversion handler also deals with RTC_EPOCH_READ and
RTC_EPOCH_SET, which are not handled in rtc-dev.c but only in a single
device driver (rtc-vr41xx), so I'm adding the compat version in the same
place. I don't expect other drivers to need those commands in the future.

Acked-by: Alexandre Belloni 
Reviewed-by: Ben Hutchings 
Signed-off-by: Arnd Bergmann 
---
v4: handle RTC_EPOCH_SET32 in rtc_dev_compat_ioctl
v3: handle RTC_IRQP_READ32/RTC_IRQP_SET32 in rtc_dev_compat_ioctl
v2: merge compat handler into ioctl function to avoid the
    compat_alloc_user_space() roundtrip, based on feedback
    from Al Viro.