<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/drivers/rtc, branch v6.6.16</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>rtc: Extend timeout for waiting for UIP to clear to 1s</title>
<updated>2024-02-01T00:18:56+00:00</updated>
<author>
<name>Mario Limonciello</name>
<email>mario.limonciello@amd.com</email>
</author>
<published>2023-11-28T05:36:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=49a76c08bcfc2260af9bf9975e9f770c6f46102a'/>
<id>49a76c08bcfc2260af9bf9975e9f770c6f46102a</id>
<content type='text'>
commit cef9ecc8e938dd48a560f7dd9be1246359248d20 upstream.

Specs don't say anything about UIP being cleared within 10ms. They
only say that UIP won't occur for another 244uS. If a long NMI occurs
while UIP is still updating it might not be possible to get valid
data in 10ms.

This has been observed in the wild that around s2idle some calls can
take up to 480ms before UIP is clear.

Adjust callers from outside an interrupt context to wait for up to a
1s instead of 10ms.

Cc:  &lt;stable@vger.kernel.org&gt; # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Reported-by: Carsten Hatger &lt;xmb8dsv4@gmail.com&gt;
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626
Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit cef9ecc8e938dd48a560f7dd9be1246359248d20 upstream.

Specs don't say anything about UIP being cleared within 10ms. They
only say that UIP won't occur for another 244uS. If a long NMI occurs
while UIP is still updating it might not be possible to get valid
data in 10ms.

This has been observed in the wild that around s2idle some calls can
take up to 480ms before UIP is clear.

Adjust callers from outside an interrupt context to wait for up to a
1s instead of 10ms.

Cc:  &lt;stable@vger.kernel.org&gt; # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Reported-by: Carsten Hatger &lt;xmb8dsv4@gmail.com&gt;
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626
Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: Add support for configuring the UIP timeout for RTC reads</title>
<updated>2024-02-01T00:18:56+00:00</updated>
<author>
<name>Mario Limonciello</name>
<email>mario.limonciello@amd.com</email>
</author>
<published>2023-11-28T05:36:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=9d20185601a030266e222bd7a513984f28170e18'/>
<id>9d20185601a030266e222bd7a513984f28170e18</id>
<content type='text'>
commit 120931db07b49252aba2073096b595482d71857c upstream.

The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().

If UIP timeout is configured by caller to be &gt;=100 ms and a call
takes this long, log a warning.

Make all callers use 10ms to ensure no functional changes.

Cc:  &lt;stable@vger.kernel.org&gt; # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 120931db07b49252aba2073096b595482d71857c upstream.

The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().

If UIP timeout is configured by caller to be &gt;=100 ms and a call
takes this long, log a warning.

Make all callers use 10ms to ensure no functional changes.

Cc:  &lt;stable@vger.kernel.org&gt; # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: mc146818-lib: Adjust failure return code for mc146818_get_time()</title>
<updated>2024-02-01T00:18:56+00:00</updated>
<author>
<name>Mario Limonciello</name>
<email>mario.limonciello@amd.com</email>
</author>
<published>2023-11-28T05:36:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=d2d8ceb748346dc1e957f19b65a75532b146a9a9'/>
<id>d2d8ceb748346dc1e957f19b65a75532b146a9a9</id>
<content type='text'>
commit af838635a3eb9b1bc0d98599c101ebca98f31311 upstream.

mc146818_get_time() calls mc146818_avoid_UIP() to avoid fetching the
time while RTC update is in progress (UIP). When this fails, the return
code is -EIO, but actually there was no IO failure.

The reason for the return from mc146818_avoid_UIP() is that the UIP
wasn't cleared in the time period. Adjust the return code to -ETIMEDOUT
to match the behavior.

Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Cc:  &lt;stable@vger.kernel.org&gt;
Fixes: 2a61b0ac5493 ("rtc: mc146818-lib: refactor mc146818_get_time")
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit af838635a3eb9b1bc0d98599c101ebca98f31311 upstream.

mc146818_get_time() calls mc146818_avoid_UIP() to avoid fetching the
time while RTC update is in progress (UIP). When this fails, the return
code is -EIO, but actually there was no IO failure.

The reason for the return from mc146818_avoid_UIP() is that the UIP
wasn't cleared in the time period. Adjust the return code to -ETIMEDOUT
to match the behavior.

Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Cc:  &lt;stable@vger.kernel.org&gt;
Fixes: 2a61b0ac5493 ("rtc: mc146818-lib: refactor mc146818_get_time")
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: Adjust failure return code for cmos_set_alarm()</title>
<updated>2024-02-01T00:18:56+00:00</updated>
<author>
<name>Mario Limonciello</name>
<email>mario.limonciello@amd.com</email>
</author>
<published>2023-11-28T05:36:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=905d9e1c69b25578520bcbbff3a8f7356ec3b33c'/>
<id>905d9e1c69b25578520bcbbff3a8f7356ec3b33c</id>
<content type='text'>
commit 1311a8f0d4b23f58bbababa13623aa40b8ad4e0c upstream.

When mc146818_avoid_UIP() fails to return a valid value, this is because
UIP didn't clear in the timeout period. Adjust the return code in this
case to -ETIMEDOUT.

Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Cc:  &lt;stable@vger.kernel.org&gt;
Fixes: cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time")
Fixes: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-3-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1311a8f0d4b23f58bbababa13623aa40b8ad4e0c upstream.

When mc146818_avoid_UIP() fails to return a valid value, this is because
UIP didn't clear in the timeout period. Adjust the return code in this
case to -ETIMEDOUT.

Tested-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Reviewed-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Acked-by: Mateusz Jończyk &lt;mat.jonczyk@o2.pl&gt;
Cc:  &lt;stable@vger.kernel.org&gt;
Fixes: cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time")
Fixes: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231128053653.101798-3-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: cmos: Use ACPI alarm for non-Intel x86 systems too</title>
<updated>2024-02-01T00:18:56+00:00</updated>
<author>
<name>Mario Limonciello</name>
<email>mario.limonciello@amd.com</email>
</author>
<published>2023-11-06T16:23:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=484514580275321fe711af120bf39a17e3d7b313'/>
<id>484514580275321fe711af120bf39a17e3d7b313</id>
<content type='text'>
commit 3d762e21d56370a43478b55e604b4a83dd85aafc upstream.

Intel systems &gt; 2015 have been configured to use ACPI alarm instead
of HPET to avoid s2idle issues.

Having HPET programmed for wakeup causes problems on AMD systems with
s2idle as well.

One particular case is that the systemd "SuspendThenHibernate" feature
doesn't work properly on the Framework 13" AMD model. Switching to
using ACPI alarm fixes the issue.

Adjust the quirk to apply to AMD/Hygon systems from 2021 onwards.
This matches what has been tested and is specifically to avoid potential
risk to older systems.

Cc:  &lt;stable@vger.kernel.org&gt; # 6.1+
Reported-by:  &lt;alvin.zhuge@gmail.com&gt;
Reported-by:  &lt;renzhamin@gmail.com&gt;
Closes: https://github.com/systemd/systemd/issues/24279
Reported-by: Kelvie Wong &lt;kelvie@kelvie.ca&gt;
Closes: https://community.frame.work/t/systemd-suspend-then-hibernate-wakes-up-after-5-minutes/39392
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231106162310.85711-1-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3d762e21d56370a43478b55e604b4a83dd85aafc upstream.

Intel systems &gt; 2015 have been configured to use ACPI alarm instead
of HPET to avoid s2idle issues.

Having HPET programmed for wakeup causes problems on AMD systems with
s2idle as well.

One particular case is that the systemd "SuspendThenHibernate" feature
doesn't work properly on the Framework 13" AMD model. Switching to
using ACPI alarm fixes the issue.

Adjust the quirk to apply to AMD/Hygon systems from 2021 onwards.
This matches what has been tested and is specifically to avoid potential
risk to older systems.

Cc:  &lt;stable@vger.kernel.org&gt; # 6.1+
Reported-by:  &lt;alvin.zhuge@gmail.com&gt;
Reported-by:  &lt;renzhamin@gmail.com&gt;
Closes: https://github.com/systemd/systemd/issues/24279
Reported-by: Kelvie Wong &lt;kelvie@kelvie.ca&gt;
Closes: https://community.frame.work/t/systemd-suspend-then-hibernate-wakes-up-after-5-minutes/39392
Signed-off-by: Mario Limonciello &lt;mario.limonciello@amd.com&gt;
Link: https://lore.kernel.org/r/20231106162310.85711-1-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call</title>
<updated>2023-11-20T10:59:30+00:00</updated>
<author>
<name>Javier Carrasco</name>
<email>javier.carrasco.cruz@gmail.com</email>
</author>
<published>2023-10-13T14:34:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=40169c208f4bfdaa4999d7e6aebd90b26c8bc625'/>
<id>40169c208f4bfdaa4999d7e6aebd90b26c8bc625</id>
<content type='text'>
[ Upstream commit 2be36c09b6b07306be33519e1aa70d2e2a2161bb ]

The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.

This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.

Fixes: e5aac267a10a ("rtc: pcf85363: add alarm support")
Signed-off-by: Javier Carrasco &lt;javier.carrasco.cruz@gmail.com&gt;
Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 2be36c09b6b07306be33519e1aa70d2e2a2161bb ]

The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.

This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.

Fixes: e5aac267a10a ("rtc: pcf85363: add alarm support")
Signed-off-by: Javier Carrasco &lt;javier.carrasco.cruz@gmail.com&gt;
Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: brcmstb-waketimer: support level alarm_irq</title>
<updated>2023-11-20T10:59:30+00:00</updated>
<author>
<name>Doug Berger</name>
<email>opendmb@gmail.com</email>
</author>
<published>2023-08-30T22:47:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=e5a8fc34283e6488c000c33bbcf186f2ec254fd0'/>
<id>e5a8fc34283e6488c000c33bbcf186f2ec254fd0</id>
<content type='text'>
[ Upstream commit e005a9b35b464be5b2e0194f717e90e7e496785d ]

Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
connected to a level interrupt controller rather than an edge
interrupt controller. In this case, the interrupt cannot be left
enabled by the irq handler while preserving the hardware wake-up
signal on wake capable devices or an interrupt storm will occur.

The alarm_expired flag is introduced to allow the disabling of
the interrupt when an alarm expires and to support balancing the
calls to disable_irq() and enable_irq() in accordance with the
existing design.

Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake alarm")
Signed-off-by: Doug Berger &lt;opendmb@gmail.com&gt;
Reviewed-by: Florian Fainelli &lt;florian.fainelli@broadcom.com&gt;
Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e005a9b35b464be5b2e0194f717e90e7e496785d ]

Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
connected to a level interrupt controller rather than an edge
interrupt controller. In this case, the interrupt cannot be left
enabled by the irq handler while preserving the hardware wake-up
signal on wake capable devices or an interrupt storm will occur.

The alarm_expired flag is introduced to allow the disabling of
the interrupt when an alarm expires and to support balancing the
calls to disable_irq() and enable_irq() in accordance with the
existing design.

Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake alarm")
Signed-off-by: Doug Berger &lt;opendmb@gmail.com&gt;
Reviewed-by: Florian Fainelli &lt;florian.fainelli@broadcom.com&gt;
Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux</title>
<updated>2023-09-07T23:07:35+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2023-09-07T23:07:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=ff6e6ded54725cd01623b9a1a86b74a523198733'/>
<id>ff6e6ded54725cd01623b9a1a86b74a523198733</id>
<content type='text'>
Pull RTC updates from Alexandre Belloni:
 "Subsystem:

   - Add a way for drivers to tell the core the supported alarm range is
     smaller than the date range. This is not used yet but will be
     useful for the alarmtimers in the next release.

   - fix Wvoid-pointer-to-enum-cast warnings

   - remove redundant of_match_ptr()

   - stop warning for invalid alarms when the alarm is disabled

  Drivers:

   - isl12022: allow setting the trip level for battery level detection

   - pcf2127: add support for PCF2131 and multiple timestamps

   - stm32: time precision improvement, many fixes

   - twl: NVRAM support"

* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
  dt-bindings: rtc: ds3231: Remove text binding
  rtc: wm8350: remove unnecessary messages
  rtc: twl: remove unnecessary messages
  rtc: sun6i: remove unnecessary message
  rtc: stop warning for invalid alarms when the alarm is disabled
  rtc: twl: add NVRAM support
  rtc: pcf85363: Allow to wake up system without IRQ
  rtc: m48t86: add DT support for m48t86
  dt-bindings: rtc: Add ST M48T86
  rtc: pcf2127: remove useless check
  rtc: rzn1: Report maximum alarm limit to rtc core
  rtc: ds1305: Report maximum alarm limit to rtc core
  rtc: tps6586x: Report maximum alarm limit to rtc core
  rtc: cmos: Report supported alarm limit to rtc infrastructure
  rtc: cros-ec: Detect and report supported alarm window size
  rtc: Add support for limited alarm timer offsets
  rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
  MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
  rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
  rtc: omap: Do not check for 0 return after calling platform_get_irq()
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull RTC updates from Alexandre Belloni:
 "Subsystem:

   - Add a way for drivers to tell the core the supported alarm range is
     smaller than the date range. This is not used yet but will be
     useful for the alarmtimers in the next release.

   - fix Wvoid-pointer-to-enum-cast warnings

   - remove redundant of_match_ptr()

   - stop warning for invalid alarms when the alarm is disabled

  Drivers:

   - isl12022: allow setting the trip level for battery level detection

   - pcf2127: add support for PCF2131 and multiple timestamps

   - stm32: time precision improvement, many fixes

   - twl: NVRAM support"

* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
  dt-bindings: rtc: ds3231: Remove text binding
  rtc: wm8350: remove unnecessary messages
  rtc: twl: remove unnecessary messages
  rtc: sun6i: remove unnecessary message
  rtc: stop warning for invalid alarms when the alarm is disabled
  rtc: twl: add NVRAM support
  rtc: pcf85363: Allow to wake up system without IRQ
  rtc: m48t86: add DT support for m48t86
  dt-bindings: rtc: Add ST M48T86
  rtc: pcf2127: remove useless check
  rtc: rzn1: Report maximum alarm limit to rtc core
  rtc: ds1305: Report maximum alarm limit to rtc core
  rtc: tps6586x: Report maximum alarm limit to rtc core
  rtc: cmos: Report supported alarm limit to rtc infrastructure
  rtc: cros-ec: Detect and report supported alarm window size
  rtc: Add support for limited alarm timer offsets
  rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
  MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
  rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
  rtc: omap: Do not check for 0 return after calling platform_get_irq()
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: wm8350: remove unnecessary messages</title>
<updated>2023-09-05T23:26:04+00:00</updated>
<author>
<name>Alexandre Belloni</name>
<email>alexandre.belloni@bootlin.com</email>
</author>
<published>2023-08-27T22:16:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=d844c64bbc86682f4ac3e92627b8e3b57ddfad6a'/>
<id>d844c64bbc86682f4ac3e92627b8e3b57ddfad6a</id>
<content type='text'>
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.

Acked-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Link: https://lore.kernel.org/r/20230827221643.544259-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.

Acked-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Link: https://lore.kernel.org/r/20230827221643.544259-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rtc: twl: remove unnecessary messages</title>
<updated>2023-09-05T23:26:04+00:00</updated>
<author>
<name>Alexandre Belloni</name>
<email>alexandre.belloni@bootlin.com</email>
</author>
<published>2023-08-27T22:16:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=8805baceb0aa24757916300667940f12aa002dab'/>
<id>8805baceb0aa24757916300667940f12aa002dab</id>
<content type='text'>
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.

Link: https://lore.kernel.org/r/20230827221643.544259-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.

Link: https://lore.kernel.org/r/20230827221643.544259-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
