Pull media fixes from Mauro Carvalho Chehab: "Most of the changes are drivers fixes (rtl28xuu, fc2580, ov7670, davinci, gspca, s5p-fimc and s5c73m3). There is also a compat32 fix and one infoleak fixup at the media controller" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode [media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space [media] media-device: fix infoleak in ioctl media_enum_entities() [media] fc2580: fix tuning failure on 32-bit arch [media] Prefer gspca_sonixb over sn9c102 for all devices [media] media: davinci: vpfe: make sure all the buffers unmapped and released [media] staging: media: davinci: vpfe: make sure all the buffers are released [media] media: davinci: vpbe_display: fix releasing of active buffers [media] media: davinci: vpif_display: fix releasing of active buffers [media] media: davinci: vpif_capture: fix releasing of active buffers [media] s5p-fimc: Fix YUV422P depth [media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function [media] rtl28xxu: silence error log about disabled rtl2832_sdr module [media] rtl28xxu: do not hard depend on staging SDR module
wdev->ifdev should be set by .change_virtual_intf(). This solves the problem of WARN() messages on module unload. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a correct pipe type when filling un interrupt urbs. This should finally take care of the WARN() messages on the console when USB urbs are submitted. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
imx drm fixes from Russell
Jonathan writes: Second set of fixes for IIO in the 3.15 cycle. * ad2s1200 - Fix some missing parenthesis in a for statement that could have led to an error being missed when getting gpios. * Fix a null derefference issue in the mpu6050 when platform data is not provided (or is provided via the device tree for example). * exynos_adc bug on remove due to child devices having been added to the parent of the IIO device rather than the IIO device itself. This caused an issue with the IIO device removing itself in it's remove function. * Make all ADC drivers buildable as modules to avoid dependency issues if the IIO core is itself built as a module. The exynos adc bug became apparently whilst this fix was being tested.
Commit 62e3879 (imx-drm: imx-tve: Fix DDC I2C bus property) was trying to use 'ddc-i2c-bus' as the DDC property name (we can see that from the commit log), but unfortunately 'i2c-ddc-bus' which is a typo was actually used in the code. This results in some unnecessary inconsistency and confusions, because all the documented DDC property in device tree bindings use 'ddc-i2c-bus'. Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt Documentation/devicetree/bindings/panel/simple-panel.txt Documentation/devicetree/bindings/video/dvi-connector.txt Let's fix it before the error spreads. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jimmy Li <coder.liss@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In usbdux_ao_cmd(), the channels for the command are transfered from the cmd->chanlist and stored in the private data 'ao_chanlist'. The channel numbers are bit-shifted when stored so that they become the "command" that is transfered to the device. The channel to command conversion results in the 'ao_chanlist' having these values for the channels: channel 0 -> ao_chanlist = 0x00 channel 1 -> ao_chanlist = 0x40 channel 2 -> ao_chanlist = 0x80 channel 3 -> ao_chanlist = 0xc0 The problem is, the usbduxsub_ao_isoc_irq() function uses the 'chan' value from 'ao_chanlist' to access the 'ao_readback' array in the private data. So instead of accessing the array as 0, 1, 2, 3, it accesses it as 0x00, 0x40, 0x80, 0xc0. Fix this by storing the raw channel number in 'ao_chanlist' and doing the bit-shift when creating the command. Fixes: a998a3db530bff80 "staging: comedi: usbdux: cleanup the private data 'outBuffer'" Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Bernd Porr <mail@berndporr.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan writes: First found of IIO fixes for the 3.15 cycle. * Fix the platform data support for the at91 adc driver. * A couple of related follow up patches get the support working again for at91sam9260 and at91sam9g45 as the earlier patch results in a device name change. * A default timer value in the at91 adc driver was bonkers. Make it sane. * Fix incorrect reporting of the integration time for the cm32181 light sensor * Fix a missing break in the ad2s1200 driver which would have give a false error return. * Make sure buffer scan mask queries from userspace return 0/1 rather than a fairly random value depending on their implementation of test_bit * Fix leak of the i2c client and a null pointer dereference in the cm36651 driver. * Fix a build warning on avr32 for the mxs-lradc (not exactly a critical combination - but the issue was real).
In a board setup which disables LDB device node completely by changing
status to 'disabled', and only enables HDMI device, we're running into
the problem that imx-drm master never succeeds in binding, and hence
HDMI does not come up either.
&ldb {
status = "disabled";
lvds-channel@1 {
...
status = "okay";
};
};
The imx-drm-core should really skip the LVDS channels no matter what
lvds-channel's status is, if LDB device is disabled. Let's consider
such setup a misconfiguration, give a warning in there and not add the
component.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>