linux.git/drivers/target, branch v5.18

scsi: target: Fix incorrect use of cpumask_t

2022-05-18T01:42:23+00:00

In commit d72d827f2f26, I used 'cpumask_t' incorrectly:

    void iscsit_thread_get_cpumask(struct iscsi_conn *conn)
    {
            int ord, cpu;
            cpumask_t conn_allowed_cpumask;
            ......
    }

    static ssize_t lio_target_wwn_cpus_allowed_list_store(
                   struct config_item *item, const char *page, size_t count)
    {
            int ret;
            char *orig;
            cpumask_t new_allowed_cpumask;
            ......
    }

The correct pattern should be as follows:

    cpumask_var_t mask;

    if (!zalloc_cpumask_var(&mask, GFP_KERNEL))
            return -ENOMEM;
    ... use 'mask' here ...
    free_cpumask_var(mask);

Link: https://lore.kernel.org/r/20220516054721.1548-1-mingzhe.zou@easystack.cn
Fixes: d72d827f2f26 ("scsi: target: Add iscsi/cpus_allowed_list in configfs")
Reported-by: Test Bot 
Reviewed-by: Mike Christie 
Signed-off-by: Mingzhe Zou 
Signed-off-by: Martin K. Petersen

scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data

2022-04-28T02:40:09+00:00

With tape devices, the SCF_TREAT_READ_AS_NORMAL flag is used by the target
subsystem to mark commands which have both data to return as well as sense
data. But with pscsi, SCF_TREAT_READ_AS_NORMAL can be set even if there is
no data to return. The SCF_TREAT_READ_AS_NORMAL flag causes the target core
to call iscsit data-in callbacks even if there is no data, which iscsit
does not support. This results in iscsit going into an error state
requiring recovery and being unable to complete the command to the
initiator.

This issue can be resolved by fixing pscsi to only set
SCF_TREAT_READ_AS_NORMAL if there is valid data to return alongside the
sense data.

Link: https://lore.kernel.org/r/20220427183250.291881-1-djeffery@redhat.com
Fixes: bd81372065fa ("scsi: target: transport should handle st FM/EOM/ILI reads")
Reported-by: Scott Hamilton 
Tested-by: Laurence Oberman 
Reviewed-by: Laurence Oberman 
Signed-off-by: David Jeffery 
Signed-off-by: Martin K. Petersen

Merge branch '5.18/scsi-queue' into 5.18/scsi-fixes

2022-04-07T01:46:54+00:00

Pull the remaining commits from 5.18/scsi-queue into fixes.

Signed-off-by: Martin K. Petersen

scsi: target: tcmu: Fix possible page UAF

2022-03-30T03:07:56+00:00

tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().

We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release().

Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser 
Signed-off-by: Xiaoguang Wang 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2022-03-25T02:37:53+00:00

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (qla2xxx, pm8001,
  libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
  and bug fixes.

  The high blast radius core update is the removal of write same, which
  affects block and several non-SCSI devices. The other big change,
  which is more local, is the removal of the SCSI pointer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
  scsi: scsi_ioctl: Drop needless assignment in sg_io()
  scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
  scsi: lpfc: Copyright updates for 14.2.0.0 patches
  scsi: lpfc: Update lpfc version to 14.2.0.0
  scsi: lpfc: SLI path split: Refactor BSG paths
  scsi: lpfc: SLI path split: Refactor Abort paths
  scsi: lpfc: SLI path split: Refactor SCSI paths
  scsi: lpfc: SLI path split: Refactor CT paths
  scsi: lpfc: SLI path split: Refactor misc ELS paths
  scsi: lpfc: SLI path split: Refactor VMID paths
  scsi: lpfc: SLI path split: Refactor FDISC paths
  scsi: lpfc: SLI path split: Refactor LS_RJT paths
  scsi: lpfc: SLI path split: Refactor LS_ACC paths
  scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
  scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
  scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
  scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
  scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
  scsi: lpfc: SLI path split: Refactor lpfc_iocbq
  scsi: lpfc: Use kcalloc()
  ...

scsi: target: Add iscsi/cpus_allowed_list in configfs

2022-03-15T03:40:36+00:00

The RX/TX threads for iSCSI connection can be scheduled to any online CPUs,
and will not be rescheduled.

When binding other heavy load threads along with iSCSI connection RX/TX
thread to the same CPU, the iSCSI performance will be worse.

Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI
connection RX/TX threads is allowed_cpus & online_cpus. If it is modified,
all RX/TX threads will be rescheduled.

Link: https://lore.kernel.org/r/20220301075500.14266-1-mingzhe.zou@easystack.cn
Reviewed-by: Mike Christie 
Signed-off-by: Mingzhe Zou 
Signed-off-by: Martin K. Petersen

scsi: core: Remove struct scsi_request

2022-03-02T03:21:50+00:00

Let submitters initialize the scmd->allowed field directly instead of
indirecting through struct scsi_request and remove the now superfluous
structure.

Link: https://lore.kernel.org/r/20220224175552.988286-8-hch@lst.de
Reviewed-by: Bart Van Assche 
Reviewed-by: John Garry 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: core: Move the result field from struct scsi_request to struct scsi_cmnd

2022-03-02T03:21:50+00:00

Prepare for removing the scsi_request structure by moving the result field
to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-7-hch@lst.de
Reviewed-by: Bart Van Assche 
Reviewed-by: John Garry 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: core: Move the resid_len field from struct scsi_request to struct scsi_cmnd

2022-03-02T03:21:49+00:00

Prepare for removing the scsi_request structure by moving the resid_len
field to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-6-hch@lst.de
Reviewed-by: Bart Van Assche 
Reviewed-by: John Garry 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: core: Remove the sense and sense_len fields from struct scsi_request

2022-03-02T03:21:49+00:00

Just use the sense_buffer field in struct scsi_cmnd for the sense data and
move the sense_len field over to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-5-hch@lst.de
Reviewed-by: Bart Van Assche 
Reviewed-by: John Garry 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen