linux.git/drivers/thermal/intel, branch v6.1.46

thermal: intel: BXT_PMIC: select REGMAP instead of depending on it

2023-03-11T12:55:32+00:00

[ Upstream commit 1467fb960349dfa5e300658f1a409dde2cfb0c51 ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver")
Signed-off-by: Randy Dunlap 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal: intel: quark_dts: fix error pointer dereference

2023-03-11T12:55:31+00:00

[ Upstream commit f1b930e740811d416de4d2074da48b6633a672c8 ]

If alloc_soc_dts() fails, then we can just return.  Trying to free
"soc_dts" will lead to an Oops.

Fixes: 8c1876939663 ("thermal: intel Quark SoC X1000 DTS thermal driver")
Signed-off-by: Dan Carpenter 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal: intel: powerclamp: Fix cur_state for multi package system

2023-03-10T08:34:22+00:00

commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream.

The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.

It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.

For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.

Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.

Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada 
Cc: 4.14+  # 4.14+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

thermal: intel: intel_pch: Add support for Wellsburg PCH

2023-03-10T08:33:50+00:00

[ Upstream commit 40dc1929089fc844ea06d9f8bdb6211ed4517c2e ]

Add the PCI ID for the Wellsburg C610 series chipset PCH.

The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.

Signed-off-by: Tim Zimmermann 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal: intel: Fix unsigned comparison with less than zero

2023-03-10T08:33:49+00:00

[ Upstream commit e7fcfe67f9f410736b758969477b17ea285e8e6c ]

The return value from the call to intel_tcc_get_tjmax() is int, which can
be a negative error code. However, the return value is being assigned to
an u32 variable 'tj_max', so making 'tj_max' an int.

Eliminate the following warning:
./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637
Reported-by: Abaci Robot 
Signed-off-by: Yang Li 
Acked-by: Zhang Rui 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()

2023-02-01T07:34:48+00:00

[ Upstream commit acd7e9ee57c880b99671dd99680cb707b7b5b0ee ]

In order to prevent int340x_thermal_get_trip_type() from possibly
racing with int340x_thermal_read_trips() invoked by int3403_notify()
add locking to it in analogy with int340x_thermal_get_trip_temp().

Fixes: 6757a7abe47b ("thermal: intel: int340x: Protect trip temperature from concurrent updates")
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin

thermal: intel: int340x: Protect trip temperature from concurrent updates

2023-02-01T07:34:39+00:00

commit 6757a7abe47bcb12cb2d45661067e182424b0ee3 upstream.

Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().

But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.

To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().

Fixes: 5fbf7f27fa3d ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada 
Cc: 5.0+  # 5.0+
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

thermal: int340x: Add missing attribute for data rate base

2023-01-12T11:02:50+00:00

commit b878d3ba9bb41cddb73ba4b56e5552f0a638daca upstream.

Commit 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM
driver")' added rfi_restriction_data_rate_base string, mmio details and
documentation, but missed adding attribute to sysfs.

Add missing sysfs attribute.

Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver")
Cc: 5.11+  # v5.11+
Signed-off-by: Srinivas Pandruvada 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

thermal: intel_powerclamp: Use first online CPU as control_cpu

2022-10-15T17:33:57+00:00

Commit 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code.  Arguably,
getting the one that's running the code in there is confusing.

For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.

Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94a4a2 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Chen Yu

thermal: int340x: processor_thermal: Use module_pci_driver() macro

2022-09-24T17:22:09+00:00

Since PCI provides helper macro module_pci_driver(), the
module_init/exit code can be replaced with it.

Signed-off-by: Shang XiaoJing 
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki