[ Upstream commit 97566d09fd02d2ab329774bb89a2cdf2267e86d9 ]

The kernel allocates a memory buffer and provides its location to the
hardware, which uses it to update the HFI table. This allocation occurs
during boot and remains constant throughout runtime.

When resuming from hibernation, the restore kernel allocates a second
memory buffer and reprograms the HFI hardware with the new location as
part of a normal boot. The location of the second memory buffer may
differ from the one allocated by the image kernel.

When the restore kernel transfers control to the image kernel, its HFI
buffer becomes invalid, potentially leading to memory corruption if the
hardware writes to it (the hardware continues to use the buffer from the
restore kernel).

It is also possible that the hardware "forgets" the address of the memory
buffer when resuming from "deep" suspend. Memory corruption may also occur
in such a scenario.

To prevent the described memory corruption, disable HFI when preparing to
suspend or hibernate. Enable it when resuming.

Add syscore callbacks to handle the package of the boot CPU (packages of
non-boot CPUs are handled via CPU offline). Syscore ops always run on the
boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend
and hibernation. Syscore ops only run in these cases.

Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Comment adjustment, subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1c53081d773c2cb4461636559b0d55b46559ceec ]

In preparation to support hibernation, add functionality to disable an HFI
instance during CPU offline. The last CPU of an instance that goes offline
will disable such instance.

The Intel Software Development Manual states that the operating system must
wait for the hardware to set MSR_IA32_PACKAGE_THERM_STATUS[26] after
disabling an HFI instance to ensure that it will no longer write on the HFI
memory. Some processors, however, do not ever set such bit. Wait a minimum
of 2ms to give time hardware to complete any pending memory writes.

Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8a8b6bb93c704776c4b05cb517c3fa8baffb72f5 ]

In preparation for the addition of a suspend notifier, wrap the logic to
enable HFI and program its memory buffer into helper functions. Both the
CPU hotplug callback and the suspend notifier will use them.

This refactoring does not introduce functional changes.

Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit fae633cfb729da2771b5433f6b84ae7e8b4aa5f7 upstream.

KASAN reported this

      [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90
      [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105
      ...
      [ 444.853442] The buggy address belongs to the variable:
      [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp]

There is a mismatch between the param_get_int and the definition of
max_idle.  Replacing param_get_int with param_get_byte resolves this
issue.

Fixes: ebf519710218 ("thermal: intel: powerclamp: Add two module parameters")
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All of the remaining callers of thermal_zone_device_register()
can use thermal_tripless_zone_device_register(), so make them
do so in order to allow the former to be dropped.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>

Pull thermal control updates from Rafael Wysocki:
 "These rework the Intel DTS IOSF and the ACPI thermal drivers to pass
  tables of generic trip point structures to the core during
  initialization and make some requisite modifications in the thermal
  core, fix a few issues elsewhere and clean up code.

  This includes changes that are present in the ACPI updates too,
  because they involve both ACPI and the thermal core. The list of
  specific changes below is limited to thermal control, however.

  Specifics:

   - Make the ACPI thermal driver use its own Notify() handler (Michal
     Wilczynski)

   - Rework the ACPI thermal driver to use a table of generic trip point
     structures on top of the internal representation of trip points and
     remove thermal zone callbacks that are not necessary any more from
     that driver (Rafael Wysocki)

   - Fix a few issues in the Intel DTS IOSF thermal driver, clean up
     code in it and make it pass tables of generic trip point structures
     to the core during thermal zone registration (Rafael Wysocki)

   - Drop a redundant check from the Intel DTS IOSF thermal driver's
     "remove" routine (Zhang Rui)

   - Use module_platform_driver() to replace an open-coded counterpart
     of it in the int340x thermal driver (Yang Yingliang)

   - Fix possible uninitialized value access in __thermal_of_bind() and
     __thermal_of_unbind() (Peng Fan)

   - Make the int3400 driver use thermal zone device wrappers (Daniel
     Lezcano)

   - Remove redundant thermal zone state check from the int340x thermal
     driver (Daniel Lezcano)

   - Drop non-functional nocrt parameter from ACPI thermal (Mario
     Limonciello)

   - Explicitly include correct DT includes in the thermal core and
     drivers (Rob Herring)"

* tag 'thermal-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: intel_soc_dts_iosf: Remove redundant check
  thermal: intel: int340x: simplify the code with module_platform_driver()
  thermal/of: Fix potential uninitialized value access
  thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip
  thermal: intel: intel_soc_dts_iosf: Rework critical trip setup
  thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points
  thermal: intel: intel_soc_dts_iosf: Change initialization ordering
  thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()
  thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()
  thermal: intel: intel_soc_dts_iosf: Always assume notification support
  thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition
  thermal: intel: intel_soc_dts_iosf: Always use 2 trips
  thermal: Explicitly include correct DT includes
  thermal/drivers/int340x: Do not check the thermal zone state
  thermal/drivers/int3400: Use thermal zone device wrappers

Pull perf event updates from Ingo Molnar:

 - AMD IBS improvements

 - Intel PMU driver updates

 - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events

 - Micro-optimize software events and the ring-buffer code

 - Misc cleanups & fixes

* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
  perf/x86/intel: Add Crestmont PMU
  x86/cpu: Update Hybrids
  x86/cpu: Fix Crestmont uarch
  x86/cpu: Fix Gracemont uarch
  perf: Remove unused extern declaration arch_perf_get_page_size()
  perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
  perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
  perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
  perf/mem: Introduce PERF_MEM_LVLNUM_UNC
  perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
  locking/arch: Avoid variable shadowing in local_try_cmpxchg()
  perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
  perf/x86: Use local64_try_cmpxchg
  perf/amd: Prevent grouping of IBS events

Remove the redundant check in remove_dts_thermal_zone() because all of
its existing callers pass a valid pointer as the argument.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The init/exit() of the driver only calls platform_driver_{un}register(),
so it can be simpilfied by using module_platform_driver().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because the number of trip points in each thermal zone and their
types are known to intel_soc_dts_iosf_init() prior to the registration
of the thermal zones, make it create an array of struct thermal_trip
entries in each struct intel_soc_dts_sensor_entry object and make
add_dts_thermal_zone() use thermal_zone_device_register_with_trips()
for thermal zone registration and pass that array as its second
argument.

Drop the sys_get_trip_temp() and sys_get_trip_type() callback
functions along with the respective callback pointers in
tzone_ops, because they are not necessary any more.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>