linux.git/drivers/tty/mxser.c, branch v5.12.5

tty: mxser: fix TIOCSSERIAL permission check

2021-05-14T08:52:02+00:00

commit b91cfb2573aeb5ab426fc3c35bcfe9e0d2a7ecbc upstream.

Changing the port type and closing_wait parameter are privileged
operations so make sure to return -EPERM if a regular user tries to
change them.

Note that the closing_wait parameter would not actually have been
changed but the return value did not indicate that.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20210407102334.32361-15-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

tty: mxser: fix TIOCSSERIAL jiffies conversions

2021-05-14T08:52:02+00:00

commit be6cf583d24dfe87324dd2830d90fc056e0a6648 upstream.

The port close_delay and closing wait parameters set by TIOCSSERIAL are
specified in jiffies, while the values returned by TIOCGSERIAL are
specified in centiseconds.

Add the missing conversions so that TIOCSSERIAL works as expected also
when HZ is not 100.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20210407102334.32361-14-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman

tty_port: drop last traces of low_latency

2021-01-07T15:17:32+00:00

The main purpose of tty_port::low_latency was removed in commit
a9c3f68f3cd8 (tty: Fix low_latency BUG) back in 2014. It was left in
place for drivers as an optional tune knob. But only one driver has been
using it until the previous commit. So remove this misconcept
completely, given there are no users.

Signed-off-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20210105120239.28031-11-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

tty: mxser: make mxser_change_speed() return void

2020-05-15T12:47:05+00:00

No other functions use the return value of mxser_change_speed() and the
return value is always 0 now. Make it return void. This fixes the
following coccicheck warning:

drivers/tty/mxser.c:645:5-8: Unneeded variable: "ret". Return "0" on
line 650

Signed-off-by: Jason Yan 
Link: https://lore.kernel.org/r/20200506061735.19369-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman

mxser: switch to ->[sg]et_serial()

2018-10-13T04:50:32+00:00

Signed-off-by: Al Viro

tty: Remove redundant license text

2017-11-08T12:08:12+00:00

Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner.  So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Jiri Slaby 
Cc: James Hogan 
Signed-off-by: Greg Kroah-Hartman

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12+00:00

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/tty files files with the correct SPDX license
identifier based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Jiri Slaby 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Chris Metcalf 
Cc: Jiri Kosina 
Cc: David Sterba 
Cc: James Hogan 
Cc: Rob Herring 
Cc: Eric Anholt 
Cc: Stefan Wahren 
Cc: Florian Fainelli 
Cc: Ray Jui 
Cc: Scott Branden 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Joachim Eastwood 
Cc: Matthias Brugger 
Cc: Masahiro Yamada 
Cc: Tobias Klauser 
Cc: Russell King 
Cc: Vineet Gupta 
Cc: Richard Genoud 
Cc: Alexander Shiyan 
Cc: Baruch Siach 
Cc: "Maciej W. Rozycki" 
Cc: "Uwe Kleine-König" 
Cc: Pat Gefre 
Cc: "Guilherme G. Piccoli" 
Cc: Jason Wessel 
Cc: Vladimir Zapolskiy 
Cc: Sylvain Lemieux 
Cc: Carlo Caione 
Cc: Kevin Hilman 
Cc: Liviu Dudau 
Cc: Sudeep Holla 
Cc: Lorenzo Pieralisi 
Cc: Andy Gross 
Cc: David Brown 
Cc: "Andreas Färber" 
Cc: Kevin Cernekee 
Cc: Laxman Dewangan 
Cc: Thierry Reding 
Cc: Jonathan Hunter 
Cc: Barry Song 
Cc: Patrice Chotard 
Cc: Maxime Coquelin 
Cc: Alexandre Torgue 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Timur Tabi 
Cc: Tony Prisk 
Cc: Michal Simek 
Cc: "Sören Brinkmann" 
Cc: Thomas Gleixner 
Cc: Kate Stewart 
Cc: Philippe Ombredanne 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

Merge 4.14-rc4 into tty-next

2017-10-09T07:05:05+00:00

We want the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

mxser: remove unused parameters

2017-10-04T08:15:47+00:00

Remove
* pdev from mxser_initbrd
* old_termios from mxser_change_speed
as they are unused and update the callers.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

mxser: fix timeout calculation for low rates

2017-09-18T16:19:20+00:00

Paul reported, that low rates like B300 make the driver to hang in
mxser_wait_until_sent. His debugging tackled the issue down to the
info->timeout computation in mxser_set_baud. Obviously, ints are used
there and they easily overflow with these low rates: B300 makes
info->timeout to be -373.

So switch all these types to unsigned as it ought to be. And use the u64
domain to perform the computation as in the worst case, we need 35 bits
to store the computed value (before division).

And use do_div not to break 32 bit kernels.

[v2] make it actually build

Signed-off-by: Jiri Slaby 
Cc: Paul 
Tested-by: 
Signed-off-by: Greg Kroah-Hartman