linux.git/drivers/tty/serdev, branch v6.1.168

tty: Replace acpi_bus_get_device()

2022-01-31T13:30:06+00:00

Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().

No intentional functional impact.

Reviewed-by: Jiri Slaby 
Signed-off-by: Rafael J. Wysocki 
Link: https://lore.kernel.org/r/7355105.EvYhyI6sBW@kreacher
Signed-off-by: Greg Kroah-Hartman

serdev: Do not instantiate serdevs on boards with known bogus DSDT entries

2021-12-30T18:01:42+00:00

x86 ACPI devices which ship with only Android as their factory image use
older kernels which do not yet support ACPI serdev enumeration, as such
the serdev information in their ACPI tables is not reliable.

For example on the Asus ME176C tablet the serdev describing the Bluetooth
HCI points to the serdev_controller connected to the GPS and the other way
around.

Use the new acpi_quirk_skip_serdev_enumeration() helper to identify
known boards with this issue and then either abort adding the serdev
controller (creating a tty cdev instead) or only create the controller
leaving the instantation of the serdev itself up to platform code.

In the case where only the serdev controller is created the necessary
serdevs will instead be instantiated by the
drivers/platform/x86/x86-android-tablets.c kernel module.

Acked-by: Greg Kroah-Hartman 
Signed-off-by: Hans de Goede 
Signed-off-by: Rafael J. Wysocki

Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-09-01T16:51:16+00:00

Pull tty / serial updates from Greg KH:
 "Here is the "big" set of tty/serial driver patches for 5.15-rc1

  Nothing major in here at all, just some driver updates and more
  cleanups on old tty apis and code that needed it that includes:

   - tty.h cleanup of things that didn't belong in it

   - other tty cleanups by Jiri

   - driver cleanups

   - rs485 support added to amba-pl011 driver

   - dts updates

   - stm32 serial driver updates

   - other minor fixes and driver updates

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
  tty: serial: uartlite: Use read_poll_timeout for a polling loop
  tty: serial: uartlite: Use constants in early_uartlite_putc
  tty: Fix data race between tiocsti() and flush_to_ldisc()
  serial: vt8500: Use of_device_get_match_data
  serial: tegra: Use of_device_get_match_data
  serial: 8250_ingenic: Use of_device_get_match_data
  tty: serial: linflexuart: Remove redundant check to simplify the code
  tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
  tty: serial: fsl_lpuart: enable two stop bits for lpuart32
  tty: serial: fsl_lpuart: fix the wrong mapbase value
  mxser: use semi-colons instead of commas
  tty: moxa: use semi-colons instead of commas
  tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
  tty: replace in_irq() with in_hardirq()
  serial: sh-sci: fix break handling for sysrq
  serial: stm32: use devm_platform_get_and_ioremap_resource()
  serial: stm32: use the defined variable to simplify code
  Revert "arm pl011 serial: support multi-irq request"
  tty: serial: samsung: Add Exynos850 SoC data
  tty: serial: samsung: Fix driver data macros style
  ...

serdev: Split and export serdev_acpi_get_uart_resource()

2021-08-13T07:12:53+00:00

The same as for I²C Serial Bus resource split and export
serdev_acpi_get_uart_resource(). We have already a few users
one of which is converted here.

Rationale of this is to consolidate parsing UART Serial Bus
resource in one place as it's done, e.g., for I²C Serial Bus.

Reviewed-by: Hans de Goede 
Acked-by: Hans de Goede 
Signed-off-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20210806111736.66591-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

bus: Make remove callback return void

2021-07-21T09:53:42+00:00

The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.

This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.

With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.

Reviewed-by: Tom Rix  (For fpga)
Reviewed-by: Mathieu Poirier 
Reviewed-by: Cornelia Huck  (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle)  (For ARM, Amba and related parts)
Acked-by: Mark Brown 
Acked-by: Chen-Yu Tsai  (for sunxi-rsb)
Acked-by: Pali Rohár 
Acked-by: Mauro Carvalho Chehab  (for media)
Acked-by: Hans de Goede  (For drivers/platform)
Acked-by: Alexandre Belloni 
Acked-By: Vinod Koul 
Acked-by: Juergen Gross  (For xen)
Acked-by: Lee Jones  (For mfd)
Acked-by: Johannes Thumshirn  (For mcb)
Acked-by: Johan Hovold 
Acked-by: Srinivas Kandagatla  (For slimbus)
Acked-by: Kirti Wankhede  (For vfio)
Acked-by: Maximilian Luz 
Acked-by: Heikki Krogerus  (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez  (For ipack)
Acked-by: Geoff Levand  (For ps3)
Acked-by: Yehezkel Bernat  (For thunderbolt)
Acked-by: Alexander Shishkin  (For intel_th)
Acked-by: Dominik Brodowski  (For pcmcia)
Acked-by: Rafael J. Wysocki  (For ACPI)
Acked-by: Bjorn Andersson  (rpmsg and apr)
Acked-by: Srinivas Pandruvada  (For intel-ish-hid)
Acked-by: Dan Williams  (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray  (For isa)
Acked-by: Stefan Richter  (For firewire)
Acked-by: Benjamin Tissoires  (For hid)
Acked-by: Thorsten Scherer  (For siox)
Acked-by: Sven Van Asbroeck  (For anybuss)
Acked-by: Ulf Hansson  (For MMC)
Acked-by: Wolfram Sang  # for I2C
Acked-by: Sudeep Holla 
Acked-by: Geert Uytterhoeven 
Acked-by: Dmitry Torokhov 
Acked-by: Finn Thain 
Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

tty: serdev: core: Fix misspelled function name __serdev_device_driver_register()

2021-05-20T15:05:34+00:00

Fixes the following W=1 kernel build warning(s):

 drivers/tty/serdev/core.c:809: warning: expecting prototype for serdev_driver_register(). Prototype was for __serdev_device_driver_register() instead

Cc: Rob Herring 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: linux-serial@vger.kernel.org
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20210520121906.3468725-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman

tty: serdev: core: Provide missing description for 'owner'

2020-11-06T09:49:27+00:00

Fixes the following W=1 kernel build warning(s):

 drivers/tty/serdev/core.c: In function ‘serdev_controller_remove’:
 drivers/tty/serdev/core.c:811: warning: Function parameter or member 'owner' not described in '__serdev_device_driver_register'

Cc: Rob Herring 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: linux-serial@vger.kernel.org
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20201104193549.4026187-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman

tty: serdev: core: Remove unused variable 'dummy'

2020-11-06T09:49:26+00:00

No need to have a dummy variable here.

Fixes the following W=1 kernel build warning(s):

 drivers/tty/serdev/core.c: In function ‘serdev_controller_remove’:
 drivers/tty/serdev/core.c:791:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]

Cc: Rob Herring 
Cc: Greg Kroah-Hartman 
Cc: Jiri Slaby 
Cc: linux-serial@vger.kernel.org
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20201104193549.4026187-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman

serdev: Fix detection of UART devices on Apple machines.

2020-03-06T13:10:44+00:00

On Apple devices the _CRS method returns an empty resource template, and
the resource settings are instead provided by the _DSM method. But
commit 33364d63c75d6182fa369cea80315cf1bb0ee38e (serdev: Add ACPI
devices by ResourceSource field) changed the search for serdev devices
to require valid, non-empty resource template, thereby breaking Apple
devices and causing bluetooth devices to not be found.

This expands the check so that if we don't find a valid template, and
we're on an Apple machine, then just check for the device being an
immediate child of the controller and having a "baud" property.

Cc:  # 5.5
Fixes: 33364d63c75d ("serdev: Add ACPI devices by ResourceSource field")
Signed-off-by: Ronald Tschalär 
Link: https://lore.kernel.org/r/20200211194723.486217-1-ronald@innovation.ch
Signed-off-by: Greg Kroah-Hartman

serdev: ttyport: restore client ops on deregistration

2020-02-10T20:26:44+00:00

The serdev tty-port controller driver should reset the tty-port client
operations also on deregistration to avoid a NULL-pointer dereference in
case the port is later re-registered as a normal tty device.

Note that this can only happen with tty drivers such as 8250 which have
statically allocated port structures that can end up being reused and
where a later registration would not register a serdev controller (e.g.
due to registration errors or if the devicetree has been changed in
between).

Specifically, this can be an issue for any statically defined ports that
would be registered by 8250 core when an 8250 driver is being unbound.

Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver")
Cc: stable      # 4.11
Reported-by: Loic Poulain 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20200210145730.22762-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman