linux.git/drivers/tty, branch v4.19.258 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git vt: Clear selection before changing the font 2022-09-15T10:17:03+00:00 Helge Deller deller@gmx.de 2022-07-30T18:50:18+00:00 f74b4a41c5d7c9522469917e3072e55d435efd9e commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream. When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Tested-by: Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream.

When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().

Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.

Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: fsl_lpuart: RS485 RTS polariy is inverse 2022-09-15T10:17:03+00:00 Shenwei Wang shenwei.wang@nxp.com 2022-08-05T14:45:29+00:00 e4979655a80f50261ffd612c1b4c08a9df7aa37a commit 846651eca073e2e02e37490a4a52752415d84781 upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable <stable@kernel.org> Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 846651eca073e2e02e37490a4a52752415d84781 upstream.

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty: serial: Fix refcount leak bug in ucc_uart.c 2022-08-25T09:15:45+00:00 Liang He windhl@126.com 2022-06-18T06:08:50+00:00 59bc4c19d53bdac61ec952c01c6e864f5f0f8367 [ Upstream commit d24d7bb2cd947676f9b71fb944d045e09b8b282f ] In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d24d7bb2cd947676f9b71fb944d045e09b8b282f ]

In soc_info(), of_find_node_by_type() will return a node pointer
with refcount incremented. We should use of_node_put() when it is
not used anymore.

Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: n_gsm: fix missing corner cases in gsmld_poll() 2022-08-25T09:15:22+00:00 Daniel Starke daniel.starke@siemens.com 2022-07-07T11:32:23+00:00 59a1c084b0007db701e6ed0b97f2c2c1c5027114 [ Upstream commit 7e5b4322cde067e1d0f1bf8f490e93f664a7c843 ] gsmld_poll() currently fails to handle the following corner cases correctly: - remote party closed the associated tty Add the missing checks and map those to EPOLLHUP. Reorder the checks to group them by their reaction. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220707113223.3685-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7e5b4322cde067e1d0f1bf8f490e93f664a7c843 ]

gsmld_poll() currently fails to handle the following corner cases correctly:
- remote party closed the associated tty

Add the missing checks and map those to EPOLLHUP.
Reorder the checks to group them by their reaction.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: n_gsm: fix DM command 2022-08-25T09:15:22+00:00 Daniel Starke daniel.starke@siemens.com 2022-07-07T11:32:21+00:00 f4c10f2fa59a5968a2ca918122b1cbdac7aa0f66 [ Upstream commit 18a948c7d90995d127785e308fa7b701df4c499f ] n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.3.3 defines the DM response. There exists no DM command. However, the current implementation incorrectly sends DM as command in case of unexpected UIH frames in gsm_queue(). Correct this behavior by always sending DM as response. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220707113223.3685-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 18a948c7d90995d127785e308fa7b701df4c499f ]

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.3.3 defines the DM response. There exists
no DM command. However, the current implementation incorrectly sends DM as
command in case of unexpected UIH frames in gsm_queue().
Correct this behavior by always sending DM as response.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: n_gsm: fix wrong T1 retry count handling 2022-08-25T09:15:22+00:00 Daniel Starke daniel.starke@siemens.com 2022-07-07T11:32:20+00:00 96a122b48482180b321f59c4bc31c370bd530d3c [ Upstream commit f30e10caa80aa1f35508bc17fc302dbbde9a833c ] n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.3 states that the valid range for the maximum number of retransmissions (N2) is from 0 to 255 (both including). gsm_dlci_t1() handles this number incorrectly by performing N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255 retransmission attempts. Fix gsm_dlci_t1() to comply with 3GPP 27.010. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220707113223.3685-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f30e10caa80aa1f35508bc17fc302dbbde9a833c ]

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.3 states that the valid range for the
maximum number of retransmissions (N2) is from 0 to 255 (both including).
gsm_dlci_t1() handles this number incorrectly by performing N2 - 1
retransmission attempts. Setting N2 to zero results in more than 255
retransmission attempts.
Fix gsm_dlci_t1() to comply with 3GPP 27.010.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: n_gsm: fix race condition in gsmld_write() 2022-08-25T09:15:21+00:00 Daniel Starke daniel.starke@siemens.com 2022-07-01T06:16:52+00:00 c530595b28effe99d99041e7f57371e046535007 [ Upstream commit 32dd59f96924f45e33bc79854f7a00679c0fa28e ] The function may be used by the user directly and also by the n_gsm internal functions. They can lead into a race condition which results in interleaved frames if both are writing at the same time. The receiving side is not able to decode those interleaved frames correctly. Add a lock around the low side tty write to avoid race conditions and frame interleaving between user originated writes and n_gsm writes. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 32dd59f96924f45e33bc79854f7a00679c0fa28e ]

The function may be used by the user directly and also by the n_gsm
internal functions. They can lead into a race condition which results in
interleaved frames if both are writing at the same time. The receiving side
is not able to decode those interleaved frames correctly.

Add a lock around the low side tty write to avoid race conditions and frame
interleaving between user originated writes and n_gsm writes.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220701061652.39604-9-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: n_gsm: fix packet re-transmission without open control channel 2022-08-25T09:15:21+00:00 Daniel Starke daniel.starke@siemens.com 2022-07-01T06:16:50+00:00 cc50d6b30fad94204616e9707a15ab01f45cbaa7 [ Upstream commit 4fae831b3a71fc5a44cc5c7d0b8c1267ee7659f5 ] In the current implementation control packets are re-transmitted even if the control channel closed down during T2. This is wrong. Check whether the control channel is open before re-transmitting any packets. Note that control channel open/close is handled by T1 and not T2 and remains unaffected by this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4fae831b3a71fc5a44cc5c7d0b8c1267ee7659f5 ]

In the current implementation control packets are re-transmitted even if
the control channel closed down during T2. This is wrong.
Check whether the control channel is open before re-transmitting any
packets. Note that control channel open/close is handled by T1 and not T2
and remains unaffected by this.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220701061652.39604-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tty: n_gsm: fix non flow control frames during mux flow off 2022-08-25T09:15:21+00:00 Daniel Starke daniel.starke@siemens.com 2022-07-01T06:16:48+00:00 c4b1f34b254c380060234583103cf80a4bd77d02 [ Upstream commit bec0224816d19abe4fe503586d16d51890540615 ] n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.6 states that FCoff stops the transmission on all channels except the control channel. This is already implemented in gsm_data_kick(). However, chapter 5.4.8.1 explains that this shall result in the same behavior as software flow control on the ldisc in advanced option mode. That means only flow control frames shall be sent during flow off. The current implementation does not consider this case. Change gsm_data_kick() to send only flow control frames if constipated to abide the standard. gsm_read_ea_val() and gsm_is_flow_ctrl_msg() are introduced as helper functions for this. It is planned to use gsm_read_ea_val() in later code cleanups for other functions, too. Fixes: c01af4fec2c8 ("n_gsm : Flow control handling in Mux driver") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bec0224816d19abe4fe503586d16d51890540615 ]

n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.6 states that FCoff stops the
transmission on all channels except the control channel. This is already
implemented in gsm_data_kick(). However, chapter 5.4.8.1 explains that this
shall result in the same behavior as software flow control on the ldisc in
advanced option mode. That means only flow control frames shall be sent
during flow off. The current implementation does not consider this case.

Change gsm_data_kick() to send only flow control frames if constipated to
abide the standard. gsm_read_ea_val() and gsm_is_flow_ctrl_msg() are
introduced as helper functions for this.
It is planned to use gsm_read_ea_val() in later code cleanups for other
functions, too.

Fixes: c01af4fec2c8 ("n_gsm : Flow control handling in Mux driver")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220701061652.39604-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
serial: 8250_dw: Store LSR into lsr_saved_flags in dw8250_tx_wait_empty() 2022-08-25T09:15:20+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2022-06-08T09:54:31+00:00 c3ca8a752a422ba1f9580f2e1d41ad650252d8ac [ Upstream commit af14f3007e2dca0d112f10f6717ba43093f74e81 ] Make sure LSR flags are preserved in dw8250_tx_wait_empty(). This function is called from a low-level out function and therefore cannot call serial_lsr_in() as it would lead to infinite recursion. It is borderline if the flags need to be saved here at all since this code relates to writing LCR register which usually implies no important characters should be arriving. Fixes: 914eaf935ec7 ("serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220608095431.18376-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit af14f3007e2dca0d112f10f6717ba43093f74e81 ]

Make sure LSR flags are preserved in dw8250_tx_wait_empty(). This
function is called from a low-level out function and therefore cannot
call serial_lsr_in() as it would lead to infinite recursion.

It is borderline if the flags need to be saved here at all since this
code relates to writing LCR register which usually implies no important
characters should be arriving.

Fixes: 914eaf935ec7 ("serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220608095431.18376-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>