linux.git/drivers/tty, branch v6.0.6

serial: 8250: Fix restoring termios speed after suspend

2022-10-21T10:38:50+00:00

[ Upstream commit 379a33786d489ab81885ff0b3935cfeb36137fea ]

Since commit edc6afc54968 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.

Since commit 027b57170bf8 ("serial: core: Fix initializing and restoring
termios speed") termios speed is available also in struct console.

So properly restore also c_ispeed and c_ospeed members after suspend to fix
restoring termios speed which is not represented by Bnnn constant.

Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Signed-off-by: Pali Rohár 
Link: https://lore.kernel.org/r/20220924104324.4035-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown

2022-10-21T10:38:49+00:00

[ Upstream commit 316ae95c175a7d770d1bfe4c011192712f57aa4a ]

lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
still occur which in turn tries to access dma apis if lpuart_dma_tx_use
flag is true. At this point since dma is torn down, these dma apis can
abort. Set lpuart_dma_tx_use and the corresponding rx flag
lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
accessed after they are relinquished.

Otherwise, when try to kill btattach, kernel may panic. This patch may
fix this issue.
root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
^C[   90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[   90.189806] Modules linked in: moal(O) mlan(O)
[   90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G           O      5.15.32-06136-g34eecdf2f9e4 #37
[   90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
[   90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   90.215470] pc : fsl_edma3_disable_request+0x8/0x60
[   90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
[   90.225237] sp : ffff800013f0bac0
[   90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
[   90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
[   90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
[   90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
[   90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
[   90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
[   90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
[   90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
[   90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
[   90.299876] Call trace:
[   90.302321]  fsl_edma3_disable_request+0x8/0x60
[   90.306851]  lpuart_flush_buffer+0x40/0x160
[   90.311037]  uart_flush_buffer+0x88/0x120
[   90.315050]  tty_driver_flush_buffer+0x20/0x30
[   90.319496]  hci_uart_flush+0x44/0x90
[   90.323162]  +0x34/0x12c
[   90.327253]  tty_ldisc_close+0x38/0x70
[   90.331005]  tty_ldisc_release+0xa8/0x190
[   90.335018]  tty_release_struct+0x24/0x8c
[   90.339022]  tty_release+0x3ec/0x4c0
[   90.342593]  __fput+0x70/0x234
[   90.345652]  ____fput+0x14/0x20
[   90.348790]  task_work_run+0x84/0x17c
[   90.352455]  do_exit+0x310/0x96c
[   90.355688]  do_group_exit+0x3c/0xa0
[   90.359259]  __arm64_sys_exit_group+0x1c/0x20
[   90.363609]  invoke_syscall+0x48/0x114
[   90.367362]  el0_svc_common.constprop.0+0xd4/0xfc
[   90.372068]  do_el0_svc+0x2c/0x94
[   90.375379]  el0_svc+0x28/0x80
[   90.378438]  el0t_64_sync_handler+0xa8/0x130
[   90.382711]  el0t_64_sync+0x1a0/0x1a4
[   90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
[   90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
[   90.397073] note: btattach[503] exited with preempt_count 1
[   90.402636] Fixing recursive fault but reboot is needed!

Fixes: 6250cc30c4c4 ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx")
Reviewed-by: Ilpo Järvinen 
Signed-off-by: Thara Gopinath 
Signed-off-by: Sherry Sun 
Link: https://lore.kernel.org/r/20220920111703.1532-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

serial: 8250: Toggle IER bits on only after irq has been set up

2022-10-21T10:38:49+00:00

[ Upstream commit 039d4926379b1d1c17b51cf21c500a5eed86899e ]

Invoking TIOCVHANGUP on 8250_mid port on Ice Lake-D and then reopening
the port triggers these faults during serial8250_do_startup():

  DMAR: DRHD: handling fault status reg 3
  DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set

If the IRQ hasn't been set up yet, the UART will have zeroes in its MSI
address/data registers. Disabling the IRQ at the interrupt controller
won't stop the UART from performing a DMA write to the address programmed
in its MSI address register (zero) when it wants to signal an interrupt.

The UARTs (in Ice Lake-D) implement PCI 2.1 style MSI without masking
capability, so there is no way to mask the interrupt at the source PCI
function level, except disabling the MSI capability entirely, but that
would cause it to fall back to INTx# assertion, and the PCI specification
prohibits disabling the MSI capability as a way to mask a function's
interrupt service request.

The MSI address register is zeroed by the hangup as the irq is freed.
The interrupt is signalled during serial8250_do_startup() performing a
THRE test that temporarily toggles THRI in IER. The THRE test currently
occurs before UART's irq (and MSI address) is properly set up.

Refactor serial8250_do_startup() such that irq is set up before the
THRE test. The current irq setup code is intermixed with the timer
setup code. As THRE test must be performed prior to the timer setup,
extract it into own function and call it only after the THRE test.

The ->setup_timer() needs to be part of the struct uart_8250_ops in
order to not create circular dependency between 8250 and 8250_base
modules.

Fixes: 40b36daad0ac ("[PATCH] 8250 UART backup timer")
Reported-by: Lennert Buytenhek 
Tested-by: Lennert Buytenhek 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20220922070005.2965-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

drivers: serial: jsm: fix some leaks in probe

2022-10-21T10:38:49+00:00

[ Upstream commit 1d5859ef229e381f4db38dce8ed58e4bf862006b ]

This error path needs to unwind instead of just returning directly.

Fixes: 03a8482c17dd ("drivers: serial: jsm: Enable support for Digi Classic adapters")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/YyxFh1+lOeZ9WfKO@kili
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: xilinx_uartps: Fix the ignore_status

2022-10-21T10:38:40+00:00

[ Upstream commit b8a6c3b3d4654fba19881cc77da61eac29f57cae ]

Currently the ignore_status is not considered in the isr.
Add a check to add the ignore_status.

Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART")
Signed-off-by: Shubhrajyoti Datta 
Link: https://lore.kernel.org/r/20220729114748.18332-5-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tty: xilinx_uartps: Check clk_enable return value

2022-10-21T10:38:40+00:00

[ Upstream commit 957e8c047bf25bd24271ab049f06dc47f382973f ]

If clocks are not enabled the register access may hang the system.
Check for the clock enable return value and bail out if not enabled.

Signed-off-by: Shubhrajyoti Datta 
Link: https://lore.kernel.org/r/20220729114748.18332-2-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman 
Stable-dep-of: b8a6c3b3d465 ("tty: xilinx_uartps: Fix the ignore_status")
Signed-off-by: Sasha Levin

serial: 8250: Request full 16550A feature probing for OxSemi PCIe devices

2022-10-21T10:37:44+00:00

commit 00b7a4d4ee42be1c515e56cb1e8ba0f25e271d8e upstream.

Oxford Semiconductor PCIe (Tornado) 950 serial port devices need to
operate in the enhanced mode via the EFR register for the Divide-by-M
N/8 baud rate generator prescaler to be used in their native UART mode.
Otherwise the prescaler is fixed at 1 causing grossly incorrect baud
rates to be programmed.

Accessing the EFR register requires 16550A features to have been probed
for, so request this to happen regardless of SERIAL_8250_16550A_VARIANTS
by setting UPF_FULL_PROBE in port flags.

Fixes: 366f6c955d4d ("serial: 8250: Add proper clock handling for OxSemi PCIe devices")
Cc: stable@vger.kernel.org # v5.19+
Reported-by: Anders Blomdell 
Signed-off-by: Maciej W. Rozycki 
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209210005040.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman

serial: 8250: Let drivers request full 16550A feature probing

2022-10-21T10:37:44+00:00

commit 9906890c89e4dbd900ed87ad3040080339a7f411 upstream.

A SERIAL_8250_16550A_VARIANTS configuration option has been recently
defined that lets one request the 8250 driver not to probe for 16550A
device features so as to reduce the driver's device startup time in
virtual machines.

Some actual hardware devices require these features to have been fully
determined however for their driver to work correctly, so define a flag
to let drivers request full 16550A feature probing on a device-by-device
basis if required regardless of the SERIAL_8250_16550A_VARIANTS option
setting chosen.

Fixes: dc56ecb81a0a ("serial: 8250: Support disabling mdelay-filled probes of 16550A variants")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: Anders Blomdell 
Signed-off-by: Maciej W. Rozycki 
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209202357520.41633@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman

serial: ar933x: Deassert Transmit Enable on ->rs485_config()

2022-10-21T10:37:43+00:00

commit 3a939433ddc1bab98be028903aaa286e5e7461d7 upstream.

The ar933x_uart driver neglects to deassert Transmit Enable when
->rs485_config() is invoked.  Fix it.

Fixes: 9be1064fe524 ("serial: ar933x_uart: add RS485 support")
Cc: stable@vger.kernel.org # v5.7+
Cc: Daniel Golle 
Reviewed-by: Ilpo Järvinen 
Signed-off-by: Lukas Wunner 
Link: https://lore.kernel.org/r/5b36af26e57553f084334666e7d24c7fd131a01e.1662887231.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman

serial: Deassert Transmit Enable on probe in driver-specific way

2022-10-21T10:37:43+00:00

commit 7c7f9bc986e698873b489c371a08f206979d06b7 upstream.

When a UART port is newly registered, uart_configure_port() seeks to
deassert RS485 Transmit Enable by setting the RTS bit in port->mctrl.
However a number of UART drivers interpret a set RTS bit as *assertion*
instead of deassertion:  Affected drivers include those using
serial8250_em485_config() (except 8250_bcm2835aux.c) and some using
mctrl_gpio (e.g. imx.c).

Since the interpretation of the RTS bit is driver-specific, it is not
suitable as a means to centrally deassert Transmit Enable in the serial
core.  Instead, the serial core must call on drivers to deassert it in
their driver-specific way.  One way to achieve that is to call
->rs485_config().  It implicitly deasserts Transmit Enable.

So amend uart_configure_port() and uart_resume_port() to invoke
uart_rs485_config().  That allows removing calls to uart_rs485_config()
from drivers' ->probe() hooks and declaring the function static.

Skip any invocation of ->set_mctrl() if RS485 is enabled.  RS485 has no
hardware flow control, so the modem control lines are irrelevant and
need not be touched.  When leaving RS485 mode, reset the modem control
lines to the state stored in port->mctrl.  That way, UARTs which are
muxed between RS485 and RS232 transceivers drive the lines correctly
when switched to RS232.  (serial8250_do_startup() historically raises
the OUT1 modem signal because otherwise interrupts are not signaled on
ancient PC UARTs, but I believe that no longer applies to modern,
RS485-capable UARTs and is thus safe to be skipped.)

imx.c modifies port->mctrl whenever Transmit Enable is asserted and
deasserted.  Stop it from doing that so port->mctrl reflects the RS232
line state.

8250_omap.c deasserts Transmit Enable on ->runtime_resume() by calling
->set_mctrl().  Because that is now a no-op in RS485 mode, amend the
function to call serial8250_em485_stop_tx().

fsl_lpuart.c retrieves and applies the RS485 device tree properties
after registering the UART port.  Because applying now happens on
registration in uart_configure_port(), move retrieval of the properties
ahead of uart_add_one_port().

Link: https://lore.kernel.org/all/20220329085050.311408-1-matthias.schiffer@ew.tq-group.com/
Link: https://lore.kernel.org/all/8f538a8903795f22f9acc94a9a31b03c9c4ccacb.camel@ginzinger.com/
Fixes: d3b3404df318 ("serial: Fix incorrect rs485 polarity on uart open")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Matthias Schiffer 
Reported-by: Roosen Henri 
Tested-by: Matthias Schiffer 
Reviewed-by: Ilpo Järvinen 
Signed-off-by: Lukas Wunner 
Link: https://lore.kernel.org/r/2de36eba3fbe11278d5002e4e501afe0ceaca039.1663863805.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman