linux.git/drivers/usb/serial, branch v2.6.29-rc2

ftdi_sio: fix kref leak

2009-01-15T20:48:36+00:00

Commit 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c added kref stuff to
ftdi_sio, but missed tty_kref_put at one exit point in
ftdi_process_read.

Signed-off-by: Jim Paris 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

ti_usb_3410_5052: add Multi-Tech firmware

2009-01-13T00:37:01+00:00

Add the Multi-Tech cellular modem firmware to the TI USB serial driver.
This firmware was extracted from:

ftp://ftp.multitech.com/wireless/wireless_linux.zip

Firmware licence: "all firmware components are redistributable in binary
	form" per support@multitech.com
	Copyright (C) 2005 Multi-Tech Systems, Inc.

Signed-off-by: Chris Adams 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

ti_usb_3410_5052: add Multi-Tech modem support

2009-01-13T00:37:01+00:00

Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver.

Signed-off-by: Chris Adams 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

ti_usb_3410_5052: support alternate firmware

2009-01-13T00:37:01+00:00

The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs).  However, the alternate IDs were not loaded in the
combined product table.  This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.

Signed-off-by: Chris Adams 
Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

usb-serial: remove NULL check

2009-01-13T00:37:00+00:00

Julia Lawell found a case where a NULL check was misplaced in the
usb-serial code. However as the object in question cannot be NULL the
check can simply be removed.

Signed-off-by: Alan Cox 
Signed-off-by: Linus Torvalds

USB: add siemens_mpi usb-serial "stub" driver

2009-01-07T18:00:13+00:00

This driver got rescued from a few years ago and was requested to be
added.  So I cleaned it up, ported it to the latest kernel version and
here it is.

Cc: Thomas Hergenhahn 
Cc: Emmanuele 
Signed-off-by: Greg Kroah-Hartman

USB: add new opticon serial driver

2009-01-07T18:00:13+00:00

This is for the serial mode of the Opticon barcode scanner.

Cc: Kees Stoop 
Signed-off-by: Greg Kroah-Hartman

USB: option: increase outgoing buffer size and number

2009-01-07T18:00:06+00:00

This should speed up the option driver's upload speed quite a bit.  It has been tested by a number of different people on different devices with success.

Cc: Roland Wolters 
Signed-off-by: Greg Kroah-Hartman

USB: serial: fix up urb->status usage

2009-01-07T18:00:06+00:00

Some of the usb-serial drivers are starting to use urb->status in ways
they should not be doing.  This fixes up some of them to prevent that.

Signed-off-by: Greg Kroah-Hartman

USB: serial: usb_debug: Make static

2009-01-07T18:00:03+00:00

Sparse asked whether these could be static.

Signed-off-by: Roel Kluin 
Signed-off-by: Greg Kroah-Hartman