linux.git/drivers/usb/typec/ucsi, branch v5.3.2

usb: typec: ucsi: ccg: Fix uninitilized symbol error

2019-08-01T16:25:03+00:00

Fix smatch error:
drivers/usb/typec/ucsi/ucsi_ccg.c:975 ccg_fw_update() error: uninitialized symbol 'err'.

Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support")
Cc: stable@vger.kernel.org
Reported-by: kbuild test robot 
Signed-off-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20190801075512.24354-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

Merge branch 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2019-07-16T04:10:39+00:00

Pull i2c updates from Wolfram Sang:
 "New stuff from the I2C world:

   - in the core, getting irqs from ACPI is now similar to OF

   - new driver for MediaTek MT7621/7628/7688 SoCs

   - bcm2835, i801, and tegra drivers got some more attention

   - GPIO API cleanups

   - cleanups in the core headers

   - lots of usual driver updates"

* 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits)
  i2c: mt7621: Fix platform_no_drv_owner.cocci warnings
  i2c: cpm: remove casting dma_alloc
  dt-bindings: i2c: sun6i-p2wi: Fix the binding example
  dt-bindings: i2c: mv64xxx: Fix the example compatible
  i2c: i801: Documentation update
  i2c: i801: Add support for Intel Tiger Lake
  i2c: i801: Fix PCI ID sorting
  dt-bindings: i2c-stm32: document optional dmas
  i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support
  i2c: core: Tidy up handling of init_irq
  i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  i2c: core: Move ACPI IRQ handling to probe time
  i2c: acpi: Factor out getting the IRQ from ACPI
  i2c: acpi: Use available IRQ helper functions
  i2c: core: Allow whole core to use i2c_dev_irq_from_resources
  eeprom: at24: modify a comment referring to platform data
  dt-bindings: i2c: omap: Add new compatible for J721E SoCs
  dt-bindings: i2c: mv64xxx: Add YAML schemas
  dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
  i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  ...

usb: typec: ucsi: ccg: add runtime pm workaround

2019-06-07T22:09:27+00:00

Cypress USB Type-C CCGx controller firmware version 3.1.10
(which is being used in many NVIDIA GPU cards) has known issue of
not triggering interrupt when a USB device is hot plugged to runtime
resume the controller. If any GPU card gets latest kernel with runtime
pm support but does not get latest fixed firmware then also it should
continue to work and therefore a workaround is required to check for
any connector change event.

The workaround is that i2c bus driver will call pm_request_resume()
to runtime resume ucsi_ccg driver. CCG driver will call the ISR
for any connector change event for NVIDIA GPU card and only if it has
old CCG firmware with the known issue.

Signed-off-by: Ajay Gupta 
Acked-by: Heikki Krogerus 
Signed-off-by: Wolfram Sang

usb: typec: ucsi: ccg: enable runtime pm support

2019-06-07T22:09:20+00:00

The change enables runtime pm support to UCSI CCG driver.
Added ucsi_resume() function to enable notification after
system reusme. Exported both ucsi_resume() and ucsi_send_command()
symbols in ucsi.c for modular build.

Signed-off-by: Ajay Gupta 
Acked-by: Heikki Krogerus 
Signed-off-by: Wolfram Sang

usb: typec: ucsi: ccg: fix memory leak in do_flash

2019-06-03T12:24:57+00:00

In case memory resources for *fw* were successfully allocated,
release them before return.

Addresses-Coverity-ID: 1445499 ("Resource leak")
Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support")
Signed-off-by: Gustavo A. R. Silva 
Acked-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: ccg: fix missing unlock on error in ccg_cmd_write_flash_row()

2019-04-29T12:25:12+00:00

Add the missing unlock before return from function ccg_cmd_write_flash_row()
in the error handling case.

Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support")
Signed-off-by: Wei Yongjun 
Acked-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: Add driver for NVIDIA Alt Modes

2019-04-25T09:04:56+00:00

Latest NVIDIA GPUs support VirtualLink device. Since USBIF
has not assigned a Standard ID (SID) for VirtualLink
so using NVIDA VID 0x955 as SVID.

Signed-off-by: Ajay Gupta 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Support for DisplayPort alt mode

2019-04-25T09:04:55+00:00

This makes it possible to bind a driver to a DisplayPort
alt mode adapter devices.

The driver attempts to cope with the limitations of UCSI by
"emulating" behaviour and attempting to guess things when
ever possible in order to satisfy the requirements the
standard DisplayPort alt mode driver has.

Tested-by: Ajay Gupta 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Preliminary support for alternate modes

2019-04-25T09:03:53+00:00

With UCSI the alternate modes, just like everything else
related to USB Type-C connectors, are handled in firmware.
The operating system can see the status and is allowed to
request certain things, for example entering and exiting the
modes, but the support for alternate modes is very limited
in UCSI. The feature is also optional, which means that even
when the platform supports alternate modes, the operating
system may not be even made aware of them.

UCSI does not support direct VDM reading or writing.
Instead, alternate modes can be entered and exited using a
single custom command which takes also an optional SVID
specific configuration value as parameter. That means every
supported alternate mode has to be handled separately in
UCSI driver.

This commit does not include support for any specific
alternate mode. The discovered alternate modes are now
registered, but binding a driver to an alternate mode will
not be possible until support for that alternate mode is
added to the UCSI driver.

Tested-by: Ajay Gupta 
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: ccg: add firmware flashing support

2019-04-25T09:03:53+00:00

CCGx has two copies of the firmware in addition to the bootloader.
If the device is running FW1, FW2 can be updated with the new version.
Dual firmware mode allows the CCG device to stay in a PD contract and
support USB PD and Type-C functionality while a firmware update is in
progress.

First we read the currently flashed firmware version of both
primary and secondary firmware and then compare it with
version of firmware file to determine if flashing is required.

Command framework is added to support sending commands to CCGx
controller. We wait for response after sending the command and then
read the response from RAB_RESPONSE register.

Below commands are supported,
	- ENTER_FLASHING
	- RESET
	- PDPORT_ENABLE
	- JUMP_TO_BOOT
	- FLASH_ROW_RW
	- VALIDATE_FW

Command specific mutex lock is also added to sync between driver
and user threads.

PD port number information is added which is required while sending
PD_PORT_ENABLE command

Signed-off-by: Ajay Gupta 
[ heikki: Added ABI documentation. ]
Signed-off-by: Heikki Krogerus 
Signed-off-by: Greg Kroah-Hartman