linux.git/drivers/usb, branch v5.18

Merge tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial

2022-05-13T06:29:40+00:00

Johan writes:

USB-serial fixes for 5.18-rc7

Here are some new device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: qcserial: add support for Sierra Wireless EM7590
  USB: serial: option: add Fibocom MA510 modem
  USB: serial: option: add Fibocom L610 modem
  USB: serial: pl2303: add device id for HP LM930 Display

usb: xhci-mtk: remove bandwidth budget table

2022-05-12T16:35:38+00:00

The bandwidth budget table is introduced to trace ideal bandwidth used
by each INT/ISOC endpoint, but in fact the endpoint may consume more
bandwidth and cause data transfer error, so it's better to leave some
margin. Obviously it's difficult to find the best margin for all cases,
instead take use of the worst-case scenario.

Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20220512064931.31670-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix fs isoc's transfer error

2022-05-12T16:35:38+00:00

Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints,
this may be not enough actually and causes data transfer error, so come up
with an estimate that is no less than the worst case bandwidth used for
any one mframe, but may be an over-estimate.

Fixes: 451d3912586a ("usb: xhci-mtk: update fs bus bandwidth by bw_budget_table")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20220512064931.31670-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: fix race when gadget driver register via ioctl

2022-05-12T16:34:58+00:00

The usb_gadget_register_driver can be called multi time by to
threads via USB_RAW_IOCTL_RUN ioctl syscall, which will lead
to multiple registrations.

Call trace:
  driver_register+0x220/0x3a0 drivers/base/driver.c:171
  usb_gadget_register_driver_owner+0xfb/0x1e0
    drivers/usb/gadget/udc/core.c:1546
  raw_ioctl_run drivers/usb/gadget/legacy/raw_gadget.c:513 [inline]
  raw_ioctl+0x1883/0x2730 drivers/usb/gadget/legacy/raw_gadget.c:1220
  ioctl USB_RAW_IOCTL_RUN

This routine allows two processes to register the same driver instance
via ioctl syscall. which lead to a race condition.

Please refer to the following scenarios.

           T1                                  T2
------------------------------------------------------------------
usb_gadget_register_driver_owner
  driver_register                    driver_register
    driver_find                       driver_find
    bus_add_driver                    bus_add_driver
      priv alloced                     
      drv->p = priv;
      
      kobject_init_and_add // refcount = 1;
   //couldn't find an available UDC or it's busy
   
                                       priv alloced
                                       drv->priv = priv;
                                       kobject_init_and_add
                                         ---> refcount = 1 <------
                                       // register success
                                       
===================== another ioctl/process ======================
                                      driver_register
                                       driver_find
                                        k = kset_find_obj()
                                         ---> refcount = 2 <------
                                        
   driver_unregister
   // drv->p become T2's priv
   ---> refcount = 1 <------
   
                                        kobject_put(k)
                                         ---> refcount = 0 <------
                                        return priv->driver;
                                        --------UAF here----------

There will be UAF in this scenario.

We can fix it by adding a new STATE_DEV_REGISTERING device state to
avoid double register.

Reported-by: syzbot+dc7c3ca638e773db07f6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000e66c2805de55b15a@google.com/
Reviewed-by: Andrey Konovalov 
Signed-off-by: Schspa Shi 
Link: https://lore.kernel.org/r/20220508150247.38204-1-schspa@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci_mt6360: Update for BMC PHY setting

2022-05-12T16:33:17+00:00

Update MT6360 BMC PHY Tx/Rx setting for the compatibility.

Macpaul reported this CtoDP cable attention message cannot be received from
MT6360 TCPC. But actually, attention message really sent from UFP_D
device.

After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue.

Below's the detailed TCPM log and DP attention message didn't received from 6360
TCPCI.
[ 1206.367775] Identity: 0000:0000.0000
[ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405
[ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start
[ 1206.447383] PD TX, header: 0x1d6f
[ 1206.449393] PD TX complete, status: 0
[ 1206.454110] PD RX, header: 0x184f [1]
[ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
[ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished
[ 1206.456873] cc:=4
[ 1206.473100] AMS STRUCTURED_VDMS start
[ 1206.473103] PD TX, header: 0x2f6f
[ 1206.475397] PD TX complete, status: 0
[ 1206.480442] PD RX, header: 0x2a4f [1]
[ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2
[ 1206.483150] AMS STRUCTURED_VDMS finished
[ 1206.483151] cc:=4
[ 1206.505643] AMS STRUCTURED_VDMS start
[ 1206.505646] PD TX, header: 0x216f
[ 1206.507933] PD TX complete, status: 0
[ 1206.512664] PD RX, header: 0x1c4f [1]
[ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1
[ 1206.515460] AMS STRUCTURED_VDMS finished
[ 1206.515461] cc:=4

Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver")
Cc: stable 
Reported-by: Macpaul Lin 
Tested-by: Macpaul Lin 
Reviewed-by: Guenter Roeck 
Acked-by: Heikki Krogerus 
Signed-off-by: ChiYuan Huang 
Signed-off-by: Fabien Parent 
Link: https://lore.kernel.org/r/1652159580-30959-1-git-send-email-u0084500@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: gadget: uvc: allow for application to cleanly shutdown

2022-05-05T20:17:43+00:00

Several types of kernel panics can occur due to timing during the uvc
gadget removal. This appears to be a problem with gadget resources being
managed by both the client application's v4l2 open/close and the UDC
gadget bind/unbind. Since the concept of USB_GADGET_DELAYED_STATUS
doesn't exist for unbind, add a wait to allow for the application to
close out.

Some examples of the panics that can occur are:

<1>[ 1147.652313] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000028
<4>[ 1147.652510] Call trace:
<4>[ 1147.652514]  usb_gadget_disconnect+0x74/0x1f0
<4>[ 1147.652516]  usb_gadget_deactivate+0x38/0x168
<4>[ 1147.652520]  usb_function_deactivate+0x54/0x90
<4>[ 1147.652524]  uvc_function_disconnect+0x14/0x38
<4>[ 1147.652527]  uvc_v4l2_release+0x34/0xa0
<4>[ 1147.652537]  __fput+0xdc/0x2c0
<4>[ 1147.652540]  ____fput+0x10/0x1c
<4>[ 1147.652545]  task_work_run+0xe4/0x12c
<4>[ 1147.652549]  do_notify_resume+0x108/0x168

<1>[  282.950561][ T1472] Unable to handle kernel NULL pointer
dereference at virtual address 00000000000005b8
<6>[  282.953111][ T1472] Call trace:
<6>[  282.953121][ T1472]  usb_function_deactivate+0x54/0xd4
<6>[  282.953134][ T1472]  uvc_v4l2_release+0xac/0x1e4
<6>[  282.953145][ T1472]  v4l2_release+0x134/0x1f0
<6>[  282.953167][ T1472]  __fput+0xf4/0x428
<6>[  282.953178][ T1472]  ____fput+0x14/0x24
<6>[  282.953193][ T1472]  task_work_run+0xac/0x130

<3>[  213.410077][   T29] configfs-gadget gadget: uvc: Failed to queue
request (-108).
<1>[  213.410116][   T29] Unable to handle kernel NULL pointer
dereference at virtual address 0000000000000003
<6>[  213.413460][   T29] Call trace:
<6>[  213.413474][   T29]  uvcg_video_pump+0x1f0/0x384
<6>[  213.413489][   T29]  process_one_work+0x2a4/0x544
<6>[  213.413502][   T29]  worker_thread+0x350/0x784
<6>[  213.413515][   T29]  kthread+0x2ac/0x320
<6>[  213.413528][   T29]  ret_from_fork+0x10/0x30

Signed-off-by: Dan Vacura 
Cc: stable 
Link: https://lore.kernel.org/r/20220503201039.71720-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: Don't skip cleanup in .remove() on error

2022-05-05T20:17:43+00:00

Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.

In this case the remove callback even returns early without stopping the
tcpm worker thread and various timers. A work scheduled on the work
queue, or a firing timer after tcpci_remove() returned probably results
in a use-after-free situation because the regmap and driver data were
freed. So better make sure that tcpci_unregister_port() is called even
if disabling the irq failed.

Also emit a more specific error message instead of the i2c core's
"remove failed (EIO), will be ignored" and return 0 to suppress the
core's warning.

This patch is (also) a preparation for making i2c remove callbacks
return void.

Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver")
Signed-off-by: Uwe Kleine-König 
Cc: stable 
Acked-by: Heikki Krogerus 
Reviewed-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

usb: cdc-wdm: fix reading stuck on device close

2022-05-05T20:17:43+00:00

cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.

So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.

This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.

Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.

Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.

Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov 
Cc: stable 
Acked-by: Oliver Neukum 
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add support for Sierra Wireless EM7590

2022-05-05T13:15:15+00:00

Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions.

Signed-off-by: Ethan Yang 
Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold

USB: serial: option: add Fibocom MA510 modem

2022-05-05T12:02:26+00:00

The MA510 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the
following interfaces, respectively:

30: Diag + QDSS + Modem + RMNET
31: Diag + Modem + AT + ECM
32: Modem + AT + ECM

The first configuration (30) reuses u-blox R410M's VID/PID with
identical interface configuration.

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 30
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05c6 ProdID=90b2 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 31
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0106 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=010a Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Sven Schwermer 
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold