linux.git/drivers/usb, branch v6.14-rc6 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git usb: typec: ucsi: Fix NULL pointer access 2025-03-06T15:55:46+00:00 Andrei Kuchynski akuchynski@chromium.org 2025-03-05T11:17:39+00:00 b13abcb7ddd8d38de769486db5bd917537b32ab1 Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them. Cc: stable <stable@kernel.org> Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking") Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.

Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader 2025-03-06T15:50:24+00:00 Miao Li limiao@kylinos.cn 2025-03-04T07:07:57+00:00 ff712188daa3fe3ce7e11e530b4dca3826dae14a When used on Huawei hisi platforms, Prolific Mass Storage Card Reader which the VID:PID is in 067b:2731 might fail to enumerate at boot time and doesn't work well with LPM enabled, combination quirks: USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM fixed the problems. Signed-off-by: Miao Li <limiao@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
	USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.

Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: xhci: Fix host controllers "dying" after suspend and resume 2025-03-04T14:02:24+00:00 Michal Pecio michal.pecio@gmail.com 2025-03-04T11:31:47+00:00 c7c1f3b05c67173f462d73d301d572b3f9e57e3b A recent cleanup went a bit too far and dropped clearing the cycle bit of link TRBs, so it stays different from the rest of the ring half of the time. Then a race occurs: if the xHC reaches such link TRB before more commands are queued, the link's cycle bit unintentionally matches the xHC's cycle so it follows the link and waits for further commands. If more commands are queued before the xHC gets there, inc_enq() flips the bit so the xHC later sees a mismatch and stops executing commands. This function is called before suspend and 50% of times after resuming the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint command fails to complete in 5 seconds and this shows up xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:10.0: HC died; cleaning up followed by loss of all USB decives on the affected bus. That's if you are lucky, because if Set Deq gets stuck instead, the failure is silent. Likely responsible for kernel bug 219824. I found this while searching for possible causes of that regression and reproduced it locally before hearing back from the reporter. To repro, simply wait for link cycle to become set (debugfs), then suspend, resume and wait. To accelerate the failure I used a script which repeatedly starts and stops a UVC camera. Some HCs get fully reinitialized on resume and they are not affected. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824 Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()") Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250304113147.3322584-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
A recent cleanup went a bit too far and dropped clearing the cycle bit
of link TRBs, so it stays different from the rest of the ring half of
the time. Then a race occurs: if the xHC reaches such link TRB before
more commands are queued, the link's cycle bit unintentionally matches
the xHC's cycle so it follows the link and waits for further commands.
If more commands are queued before the xHC gets there, inc_enq() flips
the bit so the xHC later sees a mismatch and stops executing commands.

This function is called before suspend and 50% of times after resuming
the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint
command fails to complete in 5 seconds and this shows up

xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command
xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:10.0: HC died; cleaning up

followed by loss of all USB decives on the affected bus. That's if you
are lucky, because if Set Deq gets stuck instead, the failure is silent.

Likely responsible for kernel bug 219824. I found this while searching
for possible causes of that regression and reproduced it locally before
hearing back from the reporter. To repro, simply wait for link cycle to
become set (debugfs), then suspend, resume and wait. To accelerate the
failure I used a script which repeatedly starts and stops a UVC camera.

Some HCs get fully reinitialized on resume and they are not affected.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824
Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250304113147.3322584-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: Set SUSPENDENABLE soon after phy init 2025-03-04T05:26:58+00:00 Thinh Nguyen Thinh.Nguyen@synopsys.com 2025-01-30T23:49:31+00:00 cc5bfc4e16fc1d1c520cd7bb28646e82b6e69217 After phy initialization, some phy operations can only be executed while in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking phy ops. Previously the SUSPENDENABLE bits are only set after the controller initialization, which may not happen right away if there's no gadget driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits only when there's mode switching (change in GCTL.PRTCAPDIR). Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init") Cc: stable <stable@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
After phy initialization, some phy operations can only be executed while
in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking
phy ops.

Previously the SUSPENDENABLE bits are only set after the controller
initialization, which may not happen right away if there's no gadget
driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits
only when there's mode switching (change in GCTL.PRTCAPDIR).

Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Cc: stable <stable@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: hub: lack of clearing xHC resources 2025-03-03T09:21:07+00:00 Pawel Laszczak pawell@cadence.com 2025-02-28T07:50:25+00:00 2b66ef84d0d2a0ea955b40bd306f5e3abbc5cf9c The xHC resources allocated for USB devices are not released in correct order after resuming in case when while suspend device was reconnected. This issue has been detected during the fallowing scenario: - connect hub HS to root port - connect LS/FS device to hub port - wait for enumeration to finish - force host to suspend - reconnect hub attached to root port - wake host For this scenario during enumeration of USB LS/FS device the Cadence xHC reports completion error code for xHC commands because the xHC resources used for devices has not been properly released. XHCI specification doesn't mention that device can be reset in any order so, we should not treat this issue as Cadence xHC controller bug. Similar as during disconnecting in this case the device resources should be cleared starting form the last usb device in tree toward the root hub. To fix this issue usbcore driver should call hcd->driver->reset_device for all USB devices connected to hub which was reconnected while suspending. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The xHC resources allocated for USB devices are not released in correct
order after resuming in case when while suspend device was reconnected.

This issue has been detected during the fallowing scenario:
- connect hub HS to root port
- connect LS/FS device to hub port
- wait for enumeration to finish
- force host to suspend
- reconnect hub attached to root port
- wake host

For this scenario during enumeration of USB LS/FS device the Cadence xHC
reports completion error code for xHC commands because the xHC resources
used for devices has not been properly released.
XHCI specification doesn't mention that device can be reset in any order
so, we should not treat this issue as Cadence xHC controller bug.
Similar as during disconnecting in this case the device resources should
be cleared starting form the last usb device in tree toward the root hub.
To fix this issue usbcore driver should call hcd->driver->reset_device
for all USB devices connected to hub which was reconnected while
suspending.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: renesas_usbhs: Flush the notify_hotplug_work 2025-03-03T09:20:14+00:00 Claudiu Beznea claudiu.beznea.uj@bp.renesas.com 2025-02-25T11:02:48+00:00 552ca6b87e3778f3dd5b87842f95138162e16c82 When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable. Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct") Cc: stable <stable@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.

Flush the delayed work to avoid its execution when driver resources are
unavailable.

Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: renesas_usbhs: Use devm_usb_get_phy() 2025-03-03T09:20:11+00:00 Claudiu Beznea claudiu.beznea.uj@bp.renesas.com 2025-02-25T11:02:47+00:00 e0c92440938930e7fa7aa6362780d39cdea34449 The gpriv->transceiver is retrieved in probe() through usb_get_phy() but never released. Use devm_usb_get_phy() to handle this scenario. This issue was identified through code investigation. No issue was found without this change. Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Cc: stable <stable@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The gpriv->transceiver is retrieved in probe() through usb_get_phy() but
never released. Use devm_usb_get_phy() to handle this scenario.

This issue was identified through code investigation. No issue was found
without this change.

Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: renesas_usbhs: Call clk_put() 2025-03-03T09:20:04+00:00 Claudiu Beznea claudiu.beznea.uj@bp.renesas.com 2025-02-25T11:02:46+00:00 b5ea08aa883da05106fcc683d12489a4292d1122 Clocks acquired with of_clk_get() need to be freed with clk_put(). Call clk_put() on priv->clks[0] on error path. Fixes: 3df0e240caba ("usb: renesas_usbhs: Add multiple clocks management") Cc: stable <stable@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250225110248.870417-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Clocks acquired with of_clk_get() need to be freed with clk_put(). Call
clk_put() on priv->clks[0] on error path.

Fixes: 3df0e240caba ("usb: renesas_usbhs: Add multiple clocks management")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: gadget: Prevent irq storm when TH re-executes 2025-03-03T09:19:26+00:00 Badhri Jagan Sridharan badhri@google.com 2025-02-16T22:30:02+00:00 69c58deec19628c8a686030102176484eb94fed4 While commit d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") makes sure that top half(TH) does not end up overwriting the cached events before processing them when the TH gets invoked more than one time, returning IRQ_HANDLED results in occasional irq storm where the TH hogs the CPU. The irq storm can be prevented by the flag before event handler busy is cleared. Default enable interrupt moderation in all versions which support them. ftrace event stub during dwc3 irq storm: irq/504_dwc3-1111 ( 1111) [000] .... 70.000866: irq_handler_exit: irq=14 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000872: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000874: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000881: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000883: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000889: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000892: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000898: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000901: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000907: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000909: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000915: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000918: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000924: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000927: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000933: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000935: irq_handler_exit: irq=504 ret=handled .... Cc: stable <stable@kernel.org> Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250216223003.3568039-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
While commit d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in
event cache") makes sure that top half(TH) does not end up overwriting the
cached events before processing them when the TH gets invoked more than one
time, returning IRQ_HANDLED results in occasional irq storm where the TH
hogs the CPU. The irq storm can be prevented by the flag before event
handler busy is cleared. Default enable interrupt moderation in all
versions which support them.

ftrace event stub during dwc3 irq storm:
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000866: irq_handler_exit: irq=14 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000872: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000874: irq_handler_exit: irq=504 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000881: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000883: irq_handler_exit: irq=504 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000889: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000892: irq_handler_exit: irq=504 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000898: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000901: irq_handler_exit: irq=504 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000907: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000909: irq_handler_exit: irq=504 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000915: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000918: irq_handler_exit: irq=504 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000924: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000927: irq_handler_exit: irq=504 ret=handled
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000933: irq_handler_entry: irq=504 name=dwc3
    irq/504_dwc3-1111  ( 1111) [000] .... 70.000935: irq_handler_exit: irq=504 ret=handled
    ....

Cc: stable <stable@kernel.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250216223003.3568039-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: Check bmAttributes only if configuration is valid 2025-03-03T09:12:14+00:00 Prashanth K prashanth.k@oss.qualcomm.com 2025-02-24T08:56:04+00:00 8e812e9355a6f14dffd54a33d951ca403b9732f5 If the USB configuration is not valid, then avoid checking for bmAttributes to prevent null pointer deference. Cc: stable <stable@kernel.org> Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250224085604.417327-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
If the USB configuration is not valid, then avoid checking for
bmAttributes to prevent null pointer deference.

Cc: stable <stable@kernel.org>
Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250224085604.417327-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>