linux.git/drivers, branch v3.12.61

Bluetooth: hci_ldisc: Fix null pointer derefence in case of early data

2016-06-15T13:51:47+00:00

commit 84cb3df02aea4b00405521e67c4c67c2d525c364 upstream.

HCI_UART_PROTO_SET flag is set before hci_uart_set_proto call. If we
receive data from tty layer during this procedure, proto pointer may
not be assigned yet, leading to null pointer dereference in rx method
hci_uart_tty_receive.

This patch fixes this issue by introducing HCI_UART_PROTO_READY flag in
order to avoid any proto operation before proto opening and assignment.

Signed-off-by: Loic Poulain 
Signed-off-by: Marcel Holtmann 
Cc: Oliver Neukum 
Signed-off-by: Jiri Slaby

Bluetooth: btmrvl_sdio: fix firmware activation failure

2016-06-15T13:51:47+00:00

commit 9a01242dc7fc4d5fe3f722afbf35b33aa414cd2f upstream.

In some case, the btmrvl_sdio firmware would fail to active within the
polling time. Increase the polling interval to 100 msec to fix the
issue.

Signed-off-by: Wei-Ning Huang 
Signed-off-by: Wei-Ning Huang 
Signed-off-by: Marcel Holtmann 
Cc: Oliver Neukum 
Signed-off-by: Jiri Slaby

pch_phub: return -ENODATA if ROM can't be mapped

2016-06-15T13:51:46+00:00

commit a75fa128236bc2fdaa5e412145cbd577e42e14c2 upstream.

The error return err is not initialized for the case when pci_map_rom
fails and no ROM can me mapped.  Fix this by setting ret to -ENODATA;
(this is the same error value that is returned if the ROM data is
successfully mapped but does not match the expected ROM signature.).

Issue found from static code analysis using CoverityScan.

Signed-off-by: Colin Ian King 
Signed-off-by: Greg Kroah-Hartman 
Cc: Oliver Neukum 
Signed-off-by: Jiri Slaby

misc: ad525x_dpot: Fix the enabling of the "otpXen" attributes

2016-06-15T13:51:46+00:00

commit 1bb850a1b7f68b66361e658e334f9fdf8231f17d upstream.

Currently writing the attributes with "echo" will result in comparing:
"enabled\n" with "enabled\0" and attribute is always set to false.

Use the sysfs_streq() instead because it treats both NUL and
new-line-then-NUL as equivalent string terminations.

Signed-off-by: Dan Bogdan Nechita 
Signed-off-by: Greg Kroah-Hartman 
Cc: Oliver Neukum 
Signed-off-by: Jiri Slaby

drm/fb_helper: Fix references to dev->mode_config.num_connector

2016-06-15T07:32:15+00:00

commit 255f0e7c418ad95a4baeda017ae6182ba9b3c423 upstream.

During boot, MST hotplugs are generally expected (even if no physical
hotplugging occurs) and result in DRM's connector topology changing.
This means that using num_connector from the current mode configuration
can lead to the number of connectors changing under us. This can lead to
some nasty scenarios in fbcon:

- We allocate an array to the size of dev->mode_config.num_connectors.
- MST hotplug occurs, dev->mode_config.num_connectors gets incremented.
- We try to loop through each element in the array using the new value
  of dev->mode_config.num_connectors, and end up going out of bounds
  since dev->mode_config.num_connectors is now larger then the array we
  allocated.

fb_helper->connector_count however, will always remain consistent while
we do a modeset in fb_helper.

Note: This is just polish for 4.7, Dave Airlie's drm_connector
refcounting fixed these bugs for real. But it's good enough duct-tape
for stable kernel backporting, since backporting the refcounting
changes is way too invasive.

Signed-off-by: Lyude 
[danvet: Clarify why we need this. Also remove the now unused "dev"
local variable to appease gcc.]
Signed-off-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/1463065021-18280-3-git-send-email-cpaul@redhat.com
Signed-off-by: Jiri Slaby

drm/gma500: Fix possible out of bounds read

2016-06-15T07:32:15+00:00

commit 7ccca1d5bf69fdd1d3c5fcf84faf1659a6e0ad11 upstream.

Fix possible out of bounds read, by adding missing comma.
The code may read pass the end of the dsi_errors array
when the most significant bit (bit #31) in the intr_stat register
is set.
This bug has been detected using CppCheck (static analysis tool).

Signed-off-by: Itai Handler 
Signed-off-by: Patrik Jakobsson 
Signed-off-by: Jiri Slaby

xen/events: Don't move disabled irqs

2016-06-15T07:32:14+00:00

commit f0f393877c71ad227d36705d61d1e4062bc29cf5 upstream.

Commit ff1e22e7a638 ("xen/events: Mask a moving irq") open-coded
irq_move_irq() but left out checking if the IRQ is disabled. This broke
resuming from suspend since it tries to move a (disabled) irq without
holding the IRQ's desc->lock. Fix it by adding in a check for disabled
IRQs.

The resulting stacktrace was:
kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31!
invalid opcode: 0000 [#1] SMP
Modules linked in: xenfs xen_privcmd ...
CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016
task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000
RIP: 0010:[]  [] irq_move_masked_irq+0xd2/0xe0
RSP: 0018:ffff88003d7bfc50  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8
RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000
R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0
R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff
FS:  0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0
 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009
 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66
Call Trace:
 [] eoi_pirq+0xb2/0xf0
 [] __startup_pirq+0xe6/0x150
 [] xen_irq_resume+0x319/0x360
 [] xen_suspend+0xb5/0x180
 [] multi_cpu_stop+0xb5/0xe0
 [] ? cpu_stop_queue_work+0x80/0x80
 [] cpu_stopper_thread+0xb0/0x140
 [] ? finish_task_switch+0x76/0x220
 [] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
 [] smpboot_thread_fn+0x105/0x160
 [] ? sort_range+0x30/0x30
 [] kthread+0xd8/0xf0
 [] ? kthread_create_on_node+0x1e0/0x1e0
 [] ret_from_fork+0x3f/0x70
 [] ? kthread_create_on_node+0x1e0/0x1e0

Signed-off-by: Ross Lagerwall 
Reviewed-by: Boris Ostrovsky 
Signed-off-by: David Vrabel 
Signed-off-by: Jiri Slaby

rtlwifi: Fix logic error in enter/exit power-save mode

2016-06-15T07:32:13+00:00

commit 873ffe154ae074c46ed2d72dbd9a2a99f06f55b4 upstream.

In commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and
rtl_lps_enter() to use work queue"), the tests for enter/exit
power-save mode were inverted. With this change applied, the
wifi connection becomes much more stable.

Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue")
Signed-off-by: Wang YanQing 
Acked-by: Larry Finger 
Signed-off-by: Kalle Valo 
Signed-off-by: Jiri Slaby

PCI: Disable all BAR sizing for devices with non-compliant BARs

2016-06-15T07:32:13+00:00

commit ad67b437f187ea818b2860524d10f878fadfdd99 upstream.

b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant
BARs") disabled BAR sizing for BARs 0-5 of devices that don't comply with
the PCI spec.  But it didn't do anything for expansion ROM BARs, so we
still try to size them, resulting in warnings like this on Broadwell-EP:

  pci 0000:ff:12.0: BAR 6: failed to assign [mem size 0x00000001 pref]

Move the non-compliant BAR check from __pci_read_base() up to
pci_read_bases() so it applies to the expansion ROM BAR as well as
to BARs 0-5.

Note that direct callers of __pci_read_base(), like sriov_init(), will now
bypass this check.  We haven't had reports of devices with broken SR-IOV
BARs yet.

[bhelgaas: changelog]
Fixes: b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs")
Signed-off-by: Prarit Bhargava 
Signed-off-by: Bjorn Helgaas 
CC: Thomas Gleixner 
CC: Ingo Molnar 
CC: "H. Peter Anvin" 
CC: Andi Kleen 
Signed-off-by: Jiri Slaby

cpuidle: Indicate when a device has been unregistered

2016-06-15T07:32:12+00:00

commit c998c07836f985b24361629dc98506ec7893e7a0 upstream.

Currently the 'registered' member of the cpuidle_device struct is set
to 1 during cpuidle_register_device. In this same function there are
checks to see if the device is already registered to prevent duplicate
calls to register the device, but this value is never set to 0 even on
unregister of the device. Because of this, any attempt to call
cpuidle_register_device after a call to cpuidle_unregister_device will
fail which shouldn't be the case.

To prevent this, set registered to 0 when the device is unregistered.

Fixes: c878a52d3c7c (cpuidle: Check if device is already registered)
Signed-off-by: Dave Gerlach 
Acked-by: Daniel Lezcano 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Jiri Slaby