linux.git/drivers, branch v4.1.17

media/vivid-osd: fix info leak in ioctl

2016-01-31T19:23:40+00:00

commit eda98796aff0d9bf41094b06811f5def3b4c333c upstream.

The vivid_fb_ioctl() code fails to initialize the 16 _reserved bytes of
struct fb_vblank after the ->hcount member. Add an explicit
memset(0) before filling the structure to avoid the info leak.

Signed-off-by: Salva Peiró 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

staging: lustre: echo_copy.._lsm() dereferences userland pointers directly

2016-01-31T19:23:40+00:00

commit 9225c0b7b976dd9ceac2b80727a60d8fcb906a62 upstream.

missing get_user()

Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

HID: core: Avoid uninitialized buffer access

2016-01-31T19:23:39+00:00

commit 79b568b9d0c7c5d81932f4486d50b38efdd6da6d upstream.

hid_connect adds various strings to the buffer but they're all
conditional. You can find circumstances where nothing would be written
to it but the kernel will still print the supposedly empty buffer with
printk. This leads to corruption on the console/in the logs.

Ensure buf is initialized to an empty string.

Signed-off-by: Richard Purdie 
[dvhart: Initialize string to "" rather than assign buf[0] = NULL;]
Cc: Jiri Kosina 
Cc: linux-input@vger.kernel.org
Signed-off-by: Darren Hart 
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

parisc iommu: fix panic due to trying to allocate too large region

2016-01-31T19:23:39+00:00

commit e46e31a3696ae2d66f32c207df3969613726e636 upstream.

When using the Promise TX2+ SATA controller on PA-RISC, the system often
crashes with kernel panic, for example just writing data with the dd
utility will make it crash.

Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources

CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2
Backtrace:
 [<000000004021497c>] show_stack+0x14/0x20
 [<0000000040410bf0>] dump_stack+0x88/0x100
 [<000000004023978c>] panic+0x124/0x360
 [<0000000040452c18>] sba_alloc_range+0x698/0x6a0
 [<0000000040453150>] sba_map_sg+0x260/0x5b8
 [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata]
 [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata]
 [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata]
 [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130
 [<000000004049da34>] scsi_request_fn+0x6e4/0x970
 [<00000000403e95a8>] __blk_run_queue+0x40/0x60
 [<00000000403e9d8c>] blk_run_queue+0x3c/0x68
 [<000000004049a534>] scsi_run_queue+0x2a4/0x360
 [<000000004049be68>] scsi_end_request+0x1a8/0x238
 [<000000004049de84>] scsi_io_completion+0xfc/0x688
 [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0

The cause of the crash is not exhaustion of the IOMMU space, there is
plenty of free pages. The function sba_alloc_range is called with size
0x11000, thus the pages_needed variable is 0x11. The function
sba_search_bitmap is called with bits_wanted 0x11 and boundary size is
0x10 (because dma_get_seg_boundary(dev) returns 0xffff).

The function sba_search_bitmap attempts to allocate 17 pages that must not
cross 16-page boundary - it can't satisfy this requirement
(iommu_is_span_boundary always returns true) and fails even if there are
many free entries in the IOMMU space.

How did it happen that we try to allocate 17 pages that don't cross
16-page boundary? The cause is in the function iommu_coalesce_chunks. This
function tries to coalesce adjacent entries in the scatterlist. The
function does several checks if it may coalesce one entry with the next,
one of those checks is this:

	if (startsg->length + dma_len > max_seg_size)
		break;

When it finishes coalescing adjacent entries, it allocates the mapping:

sg_dma_len(contig_sg) = dma_len;
dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
sg_dma_address(contig_sg) =
	PIDE_FLAG
	| (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT)
	| dma_offset;

It is possible that (startsg->length + dma_len > max_seg_size) is false
(we are just near the 0x10000 max_seg_size boundary), so the funcion
decides to coalesce this entry with the next entry. When the coalescing
succeeds, the function performs
	dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
And now, because of non-zero dma_offset, dma_len is greater than 0x10000.
iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts
to allocate 17 pages for a device that must not cross 16-page boundary.

To fix the bug, we must make sure that dma_len after addition of
dma_offset and alignment doesn't cross the segment boundary. I.e. change
	if (startsg->length + dma_len > max_seg_size)
		break;
to
	if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size)
		break;

This patch makes this change (it precalculates max_seg_boundary at the
beginning of the function iommu_coalesce_chunks). I also added a check
that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is
not needed for Promise TX2+ SATA, but it may be needed for other devices
that have dma_get_seg_boundary lower than dma_get_max_seg_size).

Signed-off-by: Mikulas Patocka 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Fix ATSR handling for Root-Complex integrated endpoints

2016-01-31T19:23:39+00:00

commit d14053b3c714178525f22660e6aaf41263d00056 upstream.

The VT-d specification says that "Software must enable ATS on endpoint
devices behind a Root Port only if the Root Port is reported as
supporting ATS transactions."

We walk up the tree to find a Root Port, but for integrated devices we
don't find one — we get to the host bridge. In that case we *should*
allow ATS. Currently we don't, which means that we are incorrectly
failing to use ATS for the integrated graphics. Fix that.

We should never break out of this loop "naturally" with bus==NULL,
since we'll always find bridge==NULL in that case (and now return 1).

So remove the check for (!bridge) after the loop, since it can never
happen. If it did, it would be worthy of a BUG_ON(!bridge). But since
it'll oops anyway in that case, that'll do just as well.

Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman

xen-netfront: update num_queues to real created

2016-01-31T19:23:38+00:00

[ Upstream commit ca88ea1247dfee094e2467a3578eaec9bdf0833a ]

Sometimes xennet_create_queues() may failed to created all requested
queues, we need to update num_queues to real created to avoid NULL
pointer dereference.

Signed-off-by: Joe Jin 
Cc: Boris Ostrovsky 
Cc: Konrad Rzeszutek Wilk 
Cc: Wei Liu 
Cc: Ian Campbell 
Cc: David S. Miller 
Reviewed-by: Boris Ostrovsky 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

xen-netfront: respect user provided max_queues

2016-01-31T19:23:38+00:00

[ Upstream commit 32a844056fd43dda647e1c3c6b9983bdfa04d17d ]

Originally that parameter was always reset to num_online_cpus during
module initialisation, which renders it useless.

The fix is to only set max_queues to num_online_cpus when user has not
provided a value.

Signed-off-by: Wei Liu 
Cc: David Vrabel 
Reviewed-by: David Vrabel 
Tested-by: David Vrabel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

xen-netback: respect user provided max_queues

2016-01-31T19:23:38+00:00

[ Upstream commit 4c82ac3c37363e8c4ded6a5fe1ec5fa756b34df3 ]

Originally that parameter was always reset to num_online_cpus during
module initialisation, which renders it useless.

The fix is to only set max_queues to num_online_cpus when user has not
provided a value.

Reported-by: Johnny Strom 
Signed-off-by: Wei Liu 
Reviewed-by: David Vrabel 
Acked-by: Ian Campbell 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid

2016-01-31T19:23:38+00:00

[ Upstream commit 60a6531bfe49555581ccd65f66a350cc5693fcde ]

We can't be within an RCU read-side critical section when deleting
VLANs, as underlying drivers might sleep during the hardware operation.
Therefore, replace the RCU critical section with a mutex. This is
consistent with team_vlan_rx_add_vid.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Acked-by: Jiri Pirko 
Signed-off-by: Ido Schimmel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ppp, slip: Validate VJ compression slot parameters completely

2016-01-31T19:23:37+00:00

[ Upstream commit 4ab42d78e37a294ac7bc56901d563c642e03c4ae ]

Currently slhc_init() treats out-of-range values of rslots and tslots
as equivalent to 0, except that if tslots is too large it will
dereference a null pointer (CVE-2015-7799).

Add a range-check at the top of the function and make it return an
ERR_PTR() on error instead of NULL.  Change the callers accordingly.

Compile-tested only.

Reported-by: 郭永刚 
References: http://article.gmane.org/gmane.comp.security.oss.general/17908
Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman