linux.git/drivers, branch v4.13.13 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git can: c_can: don't indicate triple sampling support for D_CAN 2017-11-15T09:09:19+00:00 Richard Schütz rschuetz@uni-koblenz.de 2017-10-29T12:03:22+00:00 478ff23bf84b996c49ee78703678b72145d70230 commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fb5f0b3ef69b95e665e4bbe8a3de7201f09f1071 upstream.

The D_CAN controller doesn't provide a triple sampling mode, so don't set
the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling
triple sampling is a no-op.

Signed-off-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: ifi: Fix transmitter delay calculation 2017-11-15T09:09:19+00:00 Marek Vasut marex@denx.de 2017-11-10T10:22:39+00:00 48e244556a59646046448b5e1a669ec4380fb6cc commit 4f7116757b4bd99e4ef2636c7d957a6d63035d11 upstream. The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Markus Marb <markus@marb.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4f7116757b4bd99e4ef2636c7d957a6d63035d11 upstream.

The CANFD transmitter delay calculation formula was updated in the
latest software drop from IFI and improves the behavior of the IFI
CANFD core during bitrate switching. Use the new formula to improve
stability of the CANFD operation.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Markus Marb <markus@marb.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: peak: Add support for new PCIe/M2 CAN FD interfaces 2017-11-15T09:09:19+00:00 Stephane Grosjean s.grosjean@peak-system.com 2017-11-09T13:42:14+00:00 9a22909970a06166d51d4509c81c6e1c083edc58 commit 4cbdd0ee67191481ec57ceed94febdfef95c9f25 upstream. This adds support for the following PEAK-System CAN FD interfaces: PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels) PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.) PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels) PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.) PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels) Like the PCAN-PCIe FD interface, all of these boards run the same IP Core that is able to handle CAN FD (see also http://www.peak-system.com). Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4cbdd0ee67191481ec57ceed94febdfef95c9f25 upstream.

This adds support for the following PEAK-System CAN FD interfaces:

PCAN-cPCIe FD         CAN FD Interface for cPCI Serial (2 or 4 channels)
PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.)
PCAN-miniPCIe FD      CAN FD Interface for PCIe Mini (1, 2 or 4 channels)
PCAN-PCIe FD OEM      CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.)
PCAN-M.2              CAN FD Interface for M.2 (1 or 2 channels)

Like the PCAN-PCIe FD interface, all of these boards run the same IP Core
that is able to handle CAN FD (see also http://www.peak-system.com).

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can: sun4i: handle overrun in RX FIFO 2017-11-15T09:09:18+00:00 Gerhard Bertelsmann info@gerhard-bertelsmann.de 2017-11-06T17:16:56+00:00 c784aa2d5f175b5b8188268a84d1d51b95de6d16 commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream. SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4dcf924c2eda0c47a5c53b7703e3dc65ddaa8920 upstream.

SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not
drained fast enough (overrun) it's getting mangled. Already received
frames are dropped - the data can't be restored.

Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue 2017-11-15T09:09:18+00:00 Sinclair Yeh syeh@vmware.com 2017-11-01T17:47:05+00:00 ac9f11a6a33eab4d3bb65a647eba16cd0e59ed00 commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream. This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cef75036c40408ba3bc308bcb00a3d440da713fc upstream.

This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work
around mode set failure in 2D VMs")

With Wayland desktop and atomic mode set, during the mode setting
process there is a moment when two framebuffer sized surfaces
are being pinned.  This was not an issue with Xorg.

Since this only happens during a mode change, there should be no
performance impact by increasing allowable mem_size.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rbd: use GFP_NOIO for parent stat and data requests 2017-11-15T09:09:18+00:00 Ilya Dryomov idryomov@gmail.com 2017-11-06T10:33:36+00:00 d795a2b9b157489b5e835521c7e93265b2e10592 commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream. rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Link: http://tracker.ceph.com/issues/22014 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1e37f2f84680fa7f8394fd444b6928e334495ccc upstream.

rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on
the writeback path for cloned images -- we attempt a stat on the parent
object to see if it exists and potentially read it in to call copyup.
GFP_NOIO should be used instead of GFP_KERNEL here.

Link: http://tracker.ceph.com/issues/22014
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Input: elan_i2c - add ELAN060C to the ACPI table 2017-11-15T09:09:18+00:00 Kai-Heng Feng kai.heng.feng@canonical.com 2017-11-08T00:19:24+00:00 d344a88049b15ece7f8e81cc5da1ce5c3bcefceb commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream. ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cdea6a30c2689cc33b34c6691b57cca277f0c5dc upstream.

ELAN060C touchpad uses elan_i2c as its driver. It can be
found on Lenovo ideapad 320-14AST.

BugLink: https://bugs.launchpad.net/bugs/1727544
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI / scan: Enable GPEs before scanning the namespace 2017-11-15T09:09:16+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2017-08-09T22:34:23+00:00 dcd2b010f17d64f19ac6a1f7cc77d85faf29196a commit eb7f43c4adb4a789f99f53916182c3401b4e33c7 upstream. On some systems the platform firmware expects GPEs to be enabled before the enumeration of devices and if that expectation is not met, the systems in question may not boot in some situations. For this reason, change the initialization ordering of the ACPI subsystem to make it enable GPEs before scanning the namespace for the first time in order to enumerate devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eb7f43c4adb4a789f99f53916182c3401b4e33c7 upstream.

On some systems the platform firmware expects GPEs to be enabled
before the enumeration of devices and if that expectation is not
met, the systems in question may not boot in some situations.

For this reason, change the initialization ordering of the ACPI
subsystem to make it enable GPEs before scanning the namespace
for the first time in order to enumerate devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPICA: Make it possible to enable runtime GPEs earlier 2017-11-15T09:09:16+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2017-08-09T22:31:58+00:00 61380235fe7c76ee306565c0f4dd294256e25079 commit 1312b7e0caca44e7ff312bc2eaa888943384e3e1 upstream. Runtime GPEs have corresponding _Lxx/_Exx methods and are enabled automatically during the initialization of the ACPI subsystem through acpi_update_all_gpes() with the assumption that acpi_setup_gpe_for_wake() will be called in advance for all of the GPEs pointed to by _PRW objects in the namespace that may be affected by acpi_update_all_gpes(). That is, acpi_ev_initialize_gpe_block() can only be called for a GPE block after acpi_setup_gpe_for_wake() has been called for all of the _PRW (wakeup) GPEs in it. The platform firmware on some systems, however, expects GPEs to be enabled before the enumeration of devices which is when acpi_setup_gpe_for_wake() is called and that goes against the above assumption. For this reason, introduce a new flag to be set by acpi_ev_initialize_gpe_block() when automatically enabling a GPE to indicate to acpi_setup_gpe_for_wake() that it needs to drop the reference to the GPE coming from acpi_ev_initialize_gpe_block() and modify acpi_setup_gpe_for_wake() accordingly. These changes allow acpi_setup_gpe_for_wake() and acpi_ev_initialize_gpe_block() to be invoked in any order. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1312b7e0caca44e7ff312bc2eaa888943384e3e1 upstream.

Runtime GPEs have corresponding _Lxx/_Exx methods and are enabled
automatically during the initialization of the ACPI subsystem through
acpi_update_all_gpes() with the assumption that acpi_setup_gpe_for_wake()
will be called in advance for all of the GPEs pointed to by _PRW
objects in the namespace that may be affected by acpi_update_all_gpes().
That is, acpi_ev_initialize_gpe_block() can only be called for a GPE
block after acpi_setup_gpe_for_wake() has been called for all of the
_PRW (wakeup) GPEs in it.

The platform firmware on some systems, however, expects GPEs to be
enabled before the enumeration of devices which is when
acpi_setup_gpe_for_wake() is called and that goes against the above
assumption.

For this reason, introduce a new flag to be set by
acpi_ev_initialize_gpe_block() when automatically enabling a GPE
to indicate to acpi_setup_gpe_for_wake() that it needs to drop the
reference to the GPE coming from acpi_ev_initialize_gpe_block()
and modify acpi_setup_gpe_for_wake() accordingly.  These changes
allow acpi_setup_gpe_for_wake() and acpi_ev_initialize_gpe_block()
to be invoked in any order.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPICA: Dispatch active GPEs at init time 2017-11-15T09:09:16+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2017-08-09T22:30:09+00:00 d055d4161c9354cd53f33c38bc9699ceeaadf1b5 commit ecc1165b8b743fd1503b9c799ae3a9933b89877b upstream. In some cases GPEs are already active when they are enabled by acpi_ev_initialize_gpe_block() and whatever happens next may depend on the result of handling the events signaled by them, so the events should not be discarded (which is what happens currently) and they should be handled as soon as reasonably possible. For this reason, modify acpi_ev_initialize_gpe_block() to dispatch GPEs with the status flag set in-band right after enabling them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ecc1165b8b743fd1503b9c799ae3a9933b89877b upstream.

In some cases GPEs are already active when they are enabled by
acpi_ev_initialize_gpe_block() and whatever happens next may depend
on the result of handling the events signaled by them, so the
events should not be discarded (which is what happens currently) and
they should be handled as soon as reasonably possible.

For this reason, modify acpi_ev_initialize_gpe_block() to
dispatch GPEs with the status flag set in-band right after
enabling them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>