linux.git/drivers, branch v4.18.12

media: v4l: event: Prevent freeing event subscriptions while accessed

2018-10-03T23:59:27+00:00

commit ad608fbcf166fec809e402d548761768f602702c upstream.

The event subscriptions are added to the subscribed event list while
holding a spinlock, but that lock is subsequently released while still
accessing the subscription object. This makes it possible to unsubscribe
the event --- and freeing the subscription object's memory --- while
the subscription object is simultaneously accessed.

Prevent this by adding a mutex to serialise the event subscription and
unsubscription. This also gives a guarantee to the callback ops that the
add op has returned before the del op is called.

This change also results in making the elems field less special:
subscriptions are only added to the event list once they are fully
initialised.

Signed-off-by: Sakari Ailus 
Reviewed-by: Hans Verkuil 
Reviewed-by: Laurent Pinchart 
Cc: stable@vger.kernel.org # for 4.14 and up
Fixes: c3b5b0241f62 ("V4L/DVB: V4L: Events: Add backend")
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

clk: x86: Set default parent to 48Mhz

2018-10-03T23:59:27+00:00

[ Upstream commit bded6c03e398dc6e862dc8301fb9a60175740653 ]

System clk provided in ST soc can be set to:
48Mhz, non-spread
25Mhz, spread
To get accurate rate, we need it to set it at non-spread
option which is 48Mhz.

Signed-off-by: Akshu Agrawal 
Reviewed-by: Daniel Kurtz 
Fixes: 421bf6a1f061 ("clk: x86: Add ST oscout platform clock")
Signed-off-by: Stephen Boyd 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus

2018-10-03T23:59:27+00:00

[ Upstream commit 7fd6d98b89f382d414e1db528e29a67bbd749457 ]

Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict
with PCI BAR") made it possible for AML code to access SMBus I/O ports
by installing custom SystemIO OpRegion handler and blocking i80i driver
access upon first AML read/write to this OpRegion.

However, while ThinkPad T560 does have SystemIO OpRegion declared under
the SMBus device, it does not access any of the SMBus registers:

    Device (SMBU)
    {
        ...

        OperationRegion (SMBP, PCI_Config, 0x50, 0x04)
        Field (SMBP, DWordAcc, NoLock, Preserve)
        {
            ,   5,
            TCOB,   11,
            Offset (0x04)
        }

        Name (TCBV, 0x00)
        Method (TCBS, 0, NotSerialized)
        {
            If ((TCBV == 0x00))
            {
            TCBV = (\_SB.PCI0.SMBU.TCOB << 0x05)
            }

            Return (TCBV) /* \_SB_.PCI0.SMBU.TCBV */
        }

        OperationRegion (TCBA, SystemIO, TCBS (), 0x10)
        Field (TCBA, ByteAcc, NoLock, Preserve)
        {
            Offset (0x04),
            ,   9,
            CPSC,   1
        }
    }

Problem with the current approach is that it blocks all I/O port access
and because this system has touchpad connected to the SMBus controller
after first AML access (happens during suspend/resume cycle) the
touchpad fails to work anymore.

Fix this so that we allow ACPI AML I/O port access if it does not touch
the region reserved for the SMBus.

Fixes: 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200737
Reported-by: Yussuf Khalil 
Signed-off-by: Mika Westerberg 
Reviewed-by: Jean Delvare 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Need to set moved to true when evict bo

2018-10-03T23:59:26+00:00

[ Upstream commit 6ddd9769db4fc11a98bd7e58be1764e47fdb8384 ]

Fix the VMC page fault when the running sequence is as below:
1.amdgpu_gem_create_ioctl
2.ttm_bo_swapout->amdgpu_vm_bo_invalidate, as not called
amdgpu_vm_bo_base_init, so won't called
list_add_tail(&base->bo_list, &bo->va). Even the bo was evicted,
it won't set the bo_base->moved.
3.drm_gem_open_ioctl->amdgpu_vm_bo_base_init, here only called
list_move_tail(&base->vm_status, &vm->evicted), but not set the
bo_base->moved.
4.amdgpu_vm_bo_map->amdgpu_vm_bo_insert_map, as the bo_base->moved is
not set true, the function amdgpu_vm_bo_insert_map will call
list_move(&bo_va->base.vm_status, &vm->moved)
5.amdgpu_cs_ioctl won't validate the swapout bo, as it is only in the
moved list, not in the evict list. So VMC page fault occurs.

Signed-off-by: Emily Deng 
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

nvme-fcloop: Fix dropped LS's to removed target port

2018-10-03T23:59:26+00:00

[ Upstream commit afd299ca996929f4f98ac20da0044c0cdc124879 ]

When a targetport is removed from the config, fcloop will avoid calling
the LS done() routine thinking the targetport is gone. This leaves the
initiator reset/reconnect hanging as it waits for a status on the
Create_Association LS for the reconnect.

Change the filter in the LS callback path. If tport null (set when
failed validation before "sending to remote port"), be sure to call
done. This was the main bug. But, continue the logic that only calls
done if tport was set but there is no remoteport (e.g. case where
remoteport has been removed, thus host doesn't expect a completion).

Signed-off-by: James Smart 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ata: ftide010: Add a quirk for SQ201

2018-10-03T23:59:26+00:00

[ Upstream commit 46cb52ad414ac829680d0bb8cc7090ac2b577ca7 ]

The DMA is broken on this specific device for some unknown
reason (probably badly designed or plain broken interface
electronics) and will only work with PIO. Other users of
the same hardware does not have this problem.

Add a specific quirk so that this Gemini device gets
DMA turned off. Also fix up some code around passing the
port information around in probe while we're at it.

Signed-off-by: Linus Walleij 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Update power state at the end of smu hw_init.

2018-10-03T23:59:26+00:00

[ Upstream commit 2ab4d0e74256fc49b7b270f63c1d1e47c2455abc ]

For SI/Kv, the power state is managed by function
amdgpu_pm_compute_clocks.

when dpm enabled, we should call amdgpu_pm_compute_clocks
to update current power state instand of set boot state.

this change can fix the oops when kfd driver was enabled on Kv.

Reviewed-by: Alex Deucher 
Tested-by: Michel Dänzer 
Signed-off-by: Rex Zhu 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Enable/disable gfx PG feature in rlc safe mode

2018-10-03T23:59:26+00:00

[ Upstream commit 8ef23364b654d44244400d79988e677e504b21ba ]

This is required by gfx hw and can fix the rlc hang when
do s3 stree test on Cz/St.

Reviewed-by: Alex Deucher 
Signed-off-by: Hang Zhou 
Signed-off-by: Rex Zhu 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

hwmon: (adt7475) Make adt7475_read_word() return errors

2018-10-03T23:59:26+00:00

[ Upstream commit f196dec6d50abb2e65fb54a0621b2f1b4d922995 ]

The adt7475_read_word() function was meant to return negative error
codes on failure.

Signed-off-by: Dan Carpenter 
Reviewed-by: Tokunori Ikegami 
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

hwmon: (ina2xx) fix sysfs shunt resistor read access

2018-10-03T23:59:25+00:00

[ Upstream commit 3ad867001c91657c46dcf6656d52eb6080286fd5 ]

fix the sysfs shunt resistor read access: return the shunt resistor
value, not the calibration register contents.

update email address

Signed-off-by: Lothar Felten 
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman