linux.git/drivers, branch v4.9.50

nvme-fabrics: generate spec-compliant UUID NQNs

2017-09-13T21:13:36+00:00

commit 40a5fce495715c48c2e02668144e68a507ac5a30 upstream.

The default host NQN, which is generated based on the host's UUID,
does not follow the UUID-based NQN format laid out in the NVMe 1.3
specification.  Remove the "NVMf:" portion of the NQN to match the spec.

Signed-off-by: Daniel Verkamp 
Reviewed-by: Max Gurtovoy 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: qcom: fix config error for BCH

2017-09-13T21:13:36+00:00

commit 10777de570016471fd929869c7830a7772893e39 upstream.

The configuration for BCH is not correct in the current driver.
The ECC_CFG_ECC_DISABLE bit defines whether to enable or disable the
BCH ECC in which

	0x1 : BCH_DISABLED
	0x0 : BCH_ENABLED

But currently host->bch_enabled is being assigned to BCH_DISABLED.

Fixes: c76b78d8ec05a ("mtd: nand: Qualcomm NAND controller driver")
Signed-off-by: Abhishek Sahu 
Reviewed-by: Archit Taneja 
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: qcom: fix read failure without complete bootchain

2017-09-13T21:13:36+00:00

commit d8a9b320a26c1ea28e51e4f3ecfb593d5aac2910 upstream.

The NAND page read fails without complete boot chain since
NAND_DEV_CMD_VLD value is not proper. The default power on reset
value for this register is

    0xe - ERASE_START_VALID | WRITE_START_VALID | READ_STOP_VALID

The READ_START_VALID should be enabled for sending PAGE_READ
command. READ_STOP_VALID should be cleared since normal NAND
page read does not require READ_STOP command.

Fixes: c76b78d8ec05a ("mtd: nand: Qualcomm NAND controller driver")
Reviewed-by: Archit Taneja 
Signed-off-by: Abhishek Sahu 
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: mxc: Fix mxc_v1 ooblayout

2017-09-13T21:13:36+00:00

commit 3bff08dffe3115a25ce04b95ea75f6d868572c60 upstream.

Commit a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops")
introduced a bug in the OOB layout description. Even if the driver claims
that 3 ECC bytes are reserved to protect 512 bytes of data, it's actually
5 ECC bytes to protect 512+6 bytes of data (some OOB bytes are also
protected using extra ECC bytes).

Fix the mxc_v1_ooblayout_{free,ecc}() functions to reflect this behavior.

Signed-off-by: Boris Brezillon 
Fixes: a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops")
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()

2017-09-09T15:39:42+00:00

commit 6d5104c5a6b56385426e15047050584794bb6254 upstream.

In chasing down a previous issue with EDID probing from calling
drm_helper_hpd_irq_event() from irq context, Laurent noticed
that the DRM documentation suggests that
drm_kms_helper_hotplug_event() should be used instead.

Thus this patch replaces drm_helper_hpd_irq_event() with
drm_kms_helper_hotplug_event(), which requires we update the
connector.status entry and only call _hotplug_event() when the
status changes.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart 
Tested-by: Laurent Pinchart 
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho 
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context

2017-09-09T15:39:42+00:00

commit 518cb7057a59b9441336d2e88a396d52b6ab0cce upstream.

I was recently seeing issues with EDID probing, where
the logic to wait for the EDID read bit to be set by the
IRQ wasn't happening and the code would time out and fail.

Digging deeper, I found this was due to the fact that
IRQs were disabled as we were running in IRQ context from
the HPD signal.

Thus this patch changes the logic to handle the HPD signal
via a work_struct so we can be out of irq context.

With this patch, the EDID probing on hotplug does not time
out.

Cc: David Airlie 
Cc: Archit Taneja 
Cc: Wolfram Sang 
Cc: Lars-Peter Clausen 
Cc: Laurent Pinchart 
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart 
Tested-by: Laurent Pinchart 
Signed-off-by: John Stultz 
Signed-off-by: Archit Taneja 
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho 
Signed-off-by: Nhan Nguyen 
Signed-off-by: Greg Kroah-Hartman

scsi: sg: recheck MMAP_IO request length with lock held

2017-09-09T15:39:42+00:00

commit 8d26f491116feaa0b16de370b6a7ba40a40fa0b4 upstream.

Commit 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page
array") adds needed concurrency protection for the "reserve" buffer.
Some checks that are initially made outside the lock are replicated once
the lock is taken to ensure the checks and resulting decisions are made
using consistent state.

The check that a request with flag SG_FLAG_MMAP_IO set fits in the
reserve buffer also needs to be performed again under the lock to ensure
the reserve buffer length compared against matches the value in effect
when the request is linked to the reserve buffer.  An -ENOMEM should be
returned in this case, instead of switching over to an indirect buffer
as for non-MMAP_IO requests.

Signed-off-by: Todd Poynor 
Acked-by: Douglas Gilbert 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE

2017-09-09T15:39:42+00:00

commit 6a8dadcca81fceff9976e8828cceb072873b7bd5 upstream.

Take f_mutex around mmap() processing to protect against races with the
SG_SET_RESERVED_SIZE ioctl.  Ensure the reserve buffer length remains
consistent during the mapping operation, and set the "mmap called" flag
to prevent further changes to the reserved buffer size as an atomic
operation with the mapping.

[mkp: fixed whitespace]

Signed-off-by: Todd Poynor 
Acked-by: Douglas Gilbert 
Signed-off-by: Martin K. Petersen 
Signed-off-by: Greg Kroah-Hartman

cs5536: add support for IDE controller variant

2017-09-09T15:39:41+00:00

commit 591b6bb605785c12a21e8b07a08a277065b655a5 upstream.

Several legacy devices such as Geode-based Cisco ASA appliances
and DB800 development board do possess CS5536 IDE controller
with different PCI id than existing one. Using pata_generic is
not always feasible as at least DB800 requires MSR quirk from
pata_cs5536 to be used with vendor firmware.

Signed-off-by: Andrey Korolyov 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

drm/nouveau/pci/msi: disable MSI on big-endian platforms by default

2017-09-09T15:39:41+00:00

commit bc60c90f472b6e762ea96ef384072145adc8d4af upstream.

It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.

Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.

Signed-off-by: Ilia Mirkin 
Signed-off-by: Ben Skeggs 
Signed-off-by: Greg Kroah-Hartman