Pull driver core fixes from Greg KH:
 "Here is one fix, and three documentation updates for 5.18-rc7.

  The fix is for the firmware loader which resolves a long-reported
  problem where the credentials of the firmware loader could be set to a
  userspace process without enough permissions to actually load the
  firmware image. Many Android vendors have been reporting this for
  quite some time.

  The documentation updates are for the embargoed-hardware-issues.rst
  file to add a new entry, change an existing one, and sort the list to
  make changes easier in the future.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation/process: Update ARM contact for embargoed hardware issues
  Documentation/process: Add embargoed HW contact for Ampere Computing
  Documentation/process: Make groups alphabetical and use tabs consistently
  firmware_loader: use kernel credentials when reading firmware

Pull char/misc driver fixes from Greg KH:
 "Here are two small driver fixes for 5.18-rc7 that resolve reported
  problems:

   - slimbus driver irq bugfix

   - interconnect sync state bugfix

  Both of these have been in linux-next with no reported problems"

* tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  slimbus: qcom: Fix IRQ check in qcom_slim_probe
  interconnect: Restore sync state by ignoring ipa-virt in provider count

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
  that resolve reported problems. They include:

   - n_gsm fixes for reported issues

   - 8250_mtk driver fixes for some platforms

   - fsl_lpuart driver fix for reported problem.

   - digicolor driver fix for reported problem.

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  fsl_lpuart: Don't enable interrupts too early
  tty: n_gsm: fix invalid gsmtty_write_room() result
  tty: n_gsm: fix mux activation issues in gsm_config()
  tty: n_gsm: fix buffer over-read in gsm_dlci_data()
  serial: 8250_mtk: Fix register address for XON/XOFF character
  serial: 8250_mtk: Make sure to select the right FEATURE_SEL
  serial: 8250_mtk: Fix UART_EFR register address
  tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()

Pull USB fixes from Greg KH:
 "Here are some small fixes for reported issues with some USB drivers.
  They include:

   - xhci fixes for xhci-mtk platform driver

   - typec driver fixes for reported problems.

   - cdc-wdm read-stuck fix

   - gadget driver fix for reported race condition

   - new usb-serial driver ids

  All of these have been in linux-next with no reported problems"

* tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci-mtk: remove bandwidth budget table
  usb: xhci-mtk: fix fs isoc's transfer error
  usb: gadget: fix race when gadget driver register via ioctl
  usb: typec: tcpci_mt6360: Update for BMC PHY setting
  usb: gadget: uvc: allow for application to cleanly shutdown
  usb: typec: tcpci: Don't skip cleanup in .remove() on error
  usb: cdc-wdm: fix reading stuck on device close
  USB: serial: qcserial: add support for Sierra Wireless EM7590
  USB: serial: option: add Fibocom MA510 modem
  USB: serial: option: add Fibocom L610 modem
  USB: serial: pl2303: add device id for HP LM930 Display

Pull more drm fixes from Dave Airlie:
 "Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx
  ones also popped up later, but all seem like bad enough things to fix.
  The dma-buf, vc4 and nouveau ones are all pretty small.

  The fbdev fixes are a bit more complicated: a fix to cleanup fbdev
  devices properly, uncovered some use-after-free bugs in existing
  drivers. Then the fix for those bugs wasn't correct. This reverts that
  fix, and puts the proper fixes in place in the drivers to avoid the
  use-after-frees.

  This has had a fair number of eyes on it at this stage, and I'm
  confident enough that it puts things in the right place, and is less
  dangerous than reverting our way out of the initial change at this
  stage.

  fbdev:
   - revert NULL deref fix that turned into a use-after-free
   - prevent use-after-free in fbdev
   - efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees

  dma-buf:
   - fix panic in stats setup

  vc4:
   - fix hdmi build

  nouveau:
   - tegra iommu present fix
   - fix leak in backlight name

  vmwgfx:
   - Black screen due to fences using FIFO checks on SVGA3
   - Random black screens on boot due to uninitialized drm_mode_fb_cmd2
   - Hangs on SVGA3 due to command buffers being used with gbobjects"

* tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Disable command buffers on svga3 without gbobjects
  drm/vmwgfx: Initialize drm_mode_fb_cmd2
  drm/vmwgfx: Fix fencing on SVGAv3
  drm/vc4: hdmi: Fix build error for implicit function declaration
  dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
  fbdev: efifb: Fix a use-after-free due early fb_info cleanup
  drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
  drm/nouveau/tegra: Stop using iommu_present()
  fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: Prevent possible use-after-free in fb_release()
  Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"

Multiple fixes to fbdev to address a regression at unregistration, an
iommu detection improvement for nouveau, a memory leak fix for nouveau,
pointer dereference fix for dma_buf_file_release(), and a build breakage
fix for vc4

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers.

  These patches mosly fix error legs and exceptional conditions
  (scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with
  lpfc features"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
  scsi: lpfc: Fix split code for FLOGI on FCoE
  scsi: qla2xxx: Fix missed DMA unmap for aborted commands
  scsi: scsi_dh_alua: Properly handle the ALUA transitioning state

Pull hwmon fixes from Guenter Roeck:

 - Restrict ltq-cputemp to SOC_XWAY to fix build failure

 - Add OF device ID table to tmp401 driver to enable auto-load

* tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ltq-cputemp) restrict it to SOC_XWAY
  hwmon: (tmp401) Add OF device ID table

Pull drm fixes from Dave Airlie:
 "Pretty quiet week on the fixes front, 4 amdgpu and one i915 fix.

  I think there might be a few misc fbdev ones outstanding, but I'll see
  if they are necessary and pass them on if so.

  amdgpu:

   - Disable ASPM for VI boards on ADL platforms

   - S0ix DCN3.1 display fix

   - Resume regression fix

   - Stable pstate fix

  i915:

   - fix for kernel memory corruption when running a lot of OpenCL tests
     in parallel"

* tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)
  Revert "drm/amd/pm: keep the BACO feature enabled for suspend"
  drm/i915: Fix race in __i915_vma_remove_closed
  drm/amd/display: undo clearing of z10 related function pointers
  drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems

With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.

On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org