linux.git/fs/Kconfig, branch v5.12.5

s390,alpha: make TMPFS_INODE64 available again

2021-03-08T09:46:30+00:00

Both s390 and alpha have been switched to 64-bit ino_t with
commit 96c0a6a72d18 ("s390,alpha: switch to 64-bit ino_t").
Therefore enable TMPFS_INODE64 for both architectures again.

Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Link: https://lore.kernel.org/linux-mm/YCV7QiyoweJwvN+m@osiris/
Signed-off-by: Heiko Carstens

Merge tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

2021-02-21T18:22:20+00:00

Pull nfsd updates from Chuck Lever:

 - Update NFSv2 and NFSv3 XDR decoding functions

 - Further improve support for re-exporting NFS mounts

 - Convert NFSD stats to per-CPU counters

 - Add batch Receive posting to the server's RPC/RDMA transport

* tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (65 commits)
  nfsd: skip some unnecessary stats in the v4 case
  nfs: use change attribute for NFS re-exports
  NFSv4_2: SSC helper should use its own config.
  nfsd: cstate->session->se_client -> cstate->clp
  nfsd: simplify nfsd4_check_open_reclaim
  nfsd: remove unused set_client argument
  nfsd: find_cpntf_state cleanup
  nfsd: refactor set_client
  nfsd: rename lookup_clientid->set_client
  nfsd: simplify nfsd_renew
  nfsd: simplify process_lock
  nfsd4: simplify process_lookup1
  SUNRPC: Correct a comment
  svcrdma: DMA-sync the receive buffer in svc_rdma_recvfrom()
  svcrdma: Reduce Receive doorbell rate
  svcrdma: Deprecate stat variables that are no longer used
  svcrdma: Restore read and write stats
  svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter
  svcrdma: Convert rdma_stat_recv to a per-CPU counter
  svcrdma: Refactor svc_rdma_init() and svc_rdma_clean_up()
  ...

tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha

2021-02-10T01:26:44+00:00

As with s390, alpha is a 64-bit architecture with a 32-bit ino_t.  With
CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and
display "inode64" in the mount options, whereas passing "inode64" in the
mount options will fail.  This leads to erroneous behaviours such as
this:

  # mkdir mnt
  # mount -t tmpfs nodev mnt
  # mount -o remount,rw mnt
  mount: /home/ubuntu/mnt: mount point not mounted or bad option.

Prevent CONFIG_TMPFS_INODE64 from being selected on alpha.

Link: https://lkml.kernel.org/r/20210208215726.608197-1-seth.forshee@canonical.com
Fixes: ea3271f7196c ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee 
Acked-by: Hugh Dickins 
Cc: Chris Down 
Cc: Amir Goldstein 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: 	[5.9+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tmpfs: disallow CONFIG_TMPFS_INODE64 on s390

2021-02-10T01:26:44+00:00

Currently there is an assumption in tmpfs that 64-bit architectures also
have a 64-bit ino_t.  This is not true on s390 which has a 32-bit ino_t.
With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers
and display "inode64" in the mount options, but passing the "inode64"
mount option will fail.  This leads to the following behavior:

  # mkdir mnt
  # mount -t tmpfs nodev mnt
  # mount -o remount,rw mnt
  mount: /home/ubuntu/mnt: mount point not mounted or bad option.

As mount sees "inode64" in the mount options and thus passes it in the
options for the remount.

So prevent CONFIG_TMPFS_INODE64 from being selected on s390.

Link: https://lkml.kernel.org/r/20210205230620.518245-1-seth.forshee@canonical.com
Fixes: ea3271f7196c ("tmpfs: support 64-bit inums per-sb")
Signed-off-by: Seth Forshee 
Acked-by: Hugh Dickins 
Cc: Chris Down 
Cc: Hugh Dickins 
Cc: Amir Goldstein 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Christian Borntraeger 
Cc: 	[5.9+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

NFSv4_2: SSC helper should use its own config.

2021-01-28T15:55:37+00:00

Currently NFSv4_2 SSC helper, nfs_ssc, incorrectly uses GRACE_PERIOD
as its config. Fix by adding new config NFS_V4_2_SSC_HELPER which
depends on NFS_V4_2 and is automatically selected when NFSD_V4 is
enabled. Also removed the file name from a comment in nfs_ssc.c.

Signed-off-by: Dai Ngo 
Signed-off-by: Chuck Lever

tmpfs: support 64-bit inums per-sb

2020-08-07T18:33:24+00:00

The default is still set to inode32 for backwards compatibility, but
system administrators can opt in to the new 64-bit inode numbers by
either:

1. Passing inode64 on the command line when mounting, or
2. Configuring the kernel with CONFIG_TMPFS_INODE64=y

The inode64 and inode32 names are used based on existing precedent from
XFS.

[hughd@google.com: Kconfig fixes]
  Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008011928010.13320@eggly.anvils

Signed-off-by: Chris Down 
Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Reviewed-by: Amir Goldstein 
Acked-by: Hugh Dickins 
Cc: Al Viro 
Cc: Matthew Wilcox 
Cc: Jeff Layton 
Cc: Johannes Weiner 
Cc: Tejun Heo 
Link: http://lkml.kernel.org/r/8b23758d0c66b5e2263e08baf9c4b6a7565cbd8f.1594661218.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada

docs: filesystems: fix renamed references

2020-04-20T21:45:22+00:00

Some filesystem references got broken by a previous patch
series I submitted. Address those.

Signed-off-by: Mauro Carvalho Chehab 
Acked-by: David Sterba  # fs/affs/Kconfig
Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet

exfat: add Kconfig and Makefile

2020-03-06T02:00:40+00:00

This adds the Kconfig and Makefile for exfat.

Signed-off-by: Namjae Jeon 
Signed-off-by: Sungjong Seo 
Reviewed-by: Pali Rohár 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Al Viro

Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

2020-02-09T23:51:46+00:00

Pull new zonefs file system from Damien Le Moal:
 "Zonefs is a very simple file system exposing each zone of a zoned
  block device as a file.

  Unlike a regular file system with native zoned block device support
  (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
  sequential write constraint of zoned block devices to the user. As a
  result, zonefs is not a POSIX compliant file system. Its goal is to
  simplify the implementation of zoned block devices support in
  applications by replacing raw block device file accesses with a richer
  file based API, avoiding relying on direct block device file ioctls
  which may be more obscure to developers.

  One example of this approach is the implementation of LSM
  (log-structured merge) tree structures (such as used in RocksDB and
  LevelDB) on zoned block devices by allowing SSTables to be stored in a
  zone file similarly to a regular file system rather than as a range of
  sectors of a zoned device. The introduction of the higher level
  construct "one file is one zone" can help reducing the amount of
  changes needed in the application while at the same time allowing the
  use of zoned block devices with various programming languages other
  than C.

  Zonefs IO management implementation uses the new iomap generic code.
  Zonefs has been successfully tested using a functional test suite
  (available with zonefs userland format tool on github) and a prototype
  implementation of LevelDB on top of zonefs"

* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Add documentation
  fs: New zonefs file system