linux.git/fs/btrfs, branch v3.10.76

Btrfs:__add_inode_ref: out of bounds memory read when looking for extended ref.

2015-03-18T12:22:29+00:00

commit dd9ef135e3542ffc621c4eb7f0091870ec7a1504 upstream.

Improper arithmetics when calculting the address of the extended ref could
lead to an out of bounds memory read and kernel panic.

Signed-off-by: Quentin Casasnovas 
Reviewed-by: David Sterba 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix data loss in the fast fsync path

2015-03-18T12:22:29+00:00

commit 3a8b36f378060d20062a0918e99fae39ff077bf0 upstream.

When using the fast file fsync code path we can miss the fact that new
writes happened since the last file fsync and therefore return without
waiting for the IO to finish and write the new extents to the fsync log.

Here's an example scenario where the fsync will miss the fact that new
file data exists that wasn't yet durably persisted:

1. fs_info->last_trans_committed == N - 1 and current transaction is
   transaction N (fs_info->generation == N);

2. do a buffered write;

3. fsync our inode, this clears our inode's full sync flag, starts
   an ordered extent and waits for it to complete - when it completes
   at btrfs_finish_ordered_io(), the inode's last_trans is set to the
   value N (via btrfs_update_inode_fallback -> btrfs_update_inode ->
   btrfs_set_inode_last_trans);

4. transaction N is committed, so fs_info->last_trans_committed is now
   set to the value N and fs_info->generation remains with the value N;

5. do another buffered write, when this happens btrfs_file_write_iter
   sets our inode's last_trans to the value N + 1 (that is
   fs_info->generation + 1 == N + 1);

6. transaction N + 1 is started and fs_info->generation now has the
   value N + 1;

7. transaction N + 1 is committed, so fs_info->last_trans_committed
   is set to the value N + 1;

8. fsync our inode - because it doesn't have the full sync flag set,
   we only start the ordered extent, we don't wait for it to complete
   (only in a later phase) therefore its last_trans field has the
   value N + 1 set previously by btrfs_file_write_iter(), and so we
   have:

       inode->last_trans <= fs_info->last_trans_committed
           (N + 1)              (N + 1)

   Which made us not log the last buffered write and exit the fsync
   handler immediately, returning success (0) to user space and resulting
   in data loss after a crash.

This can actually be triggered deterministically and the following excerpt
from a testcase I made for xfstests triggers the issue. It moves a dummy
file across directories and then fsyncs the old parent directory - this
is just to trigger a transaction commit, so moving files around isn't
directly related to the issue but it was chosen because running 'sync' for
example does more than just committing the current transaction, as it
flushes/waits for all file data to be persisted. The issue can also happen
at random periods, since the transaction kthread periodicaly commits the
current transaction (about every 30 seconds by default).
The body of the test is:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our main test file 'foo', the one we check for data loss.
  # By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync'
  # bit from its flags (btrfs inode specific flags).
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \
                  -c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io

  # Now create one other file and 2 directories. We will move this second file
  # from one directory to the other later because it forces btrfs to commit its
  # currently open transaction if we fsync the old parent directory. This is
  # necessary to trigger the data loss bug that affected btrfs.
  mkdir $SCRATCH_MNT/testdir_1
  touch $SCRATCH_MNT/testdir_1/bar
  mkdir $SCRATCH_MNT/testdir_2

  # Make sure everything is durably persisted.
  sync

  # Write more 8Kb of data to our file.
  $XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io

  # Move our 'bar' file into a new directory.
  mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar

  # Fsync our first directory. Because it had a file moved into some other
  # directory, this made btrfs commit the currently open transaction. This is
  # a condition necessary to trigger the data loss bug.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1

  # Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of
  # data we wrote previously to be persisted and available if a crash happens.
  # This did not happen with btrfs, because of the transaction commit that
  # happened when we fsynced the parent directory.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # Now check that all data we wrote before are available.
  echo "File content after log replay:"
  od -t x1 $SCRATCH_MNT/foo

  status=0
  exit

The expected golden output for the test, which is what we get with this
fix applied (or when running against ext3/4 and xfs), is:

  wrote 8192/8192 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 8192/8192 bytes at offset 8192
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  File content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
  *
  0040000

Without this fix applied, the output shows the test file does not have
the second 8Kb extent that we successfully fsynced:

  wrote 8192/8192 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 8192/8192 bytes at offset 8192
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  File content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0020000

So fix this by skipping the fsync only if we're doing a full sync and
if the inode's last_trans is <= fs_info->last_trans_committed, or if
the inode is already in the log. Also remove setting the inode's
last_trans in btrfs_file_write_iter since it's useless/unreliable.

Also because btrfs_file_write_iter no longer sets inode->last_trans to
fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't
bail out if last_trans is 0, otherwise something as simple as the following
example wouldn't log the second write on the last fsync:

  1. write to file

  2. fsync file

  3. fsync file
       |--> btrfs_inode_in_log() returns true and it set last_trans to 0

  4. write to file
       |--> btrfs_file_write_iter() no longers sets last_trans, so it
            remained with a value of 0
  5. fsync
       |--> inode->last_trans == 0, so it bails out without logging the
            second write

A test case for xfstests will be sent soon.

Signed-off-by: Filipe Manana 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

btrfs: fix lost return value due to variable shadowing

2015-03-18T12:22:29+00:00

commit 1932b7be973b554ffe20a5bba6ffaed6fa995cdc upstream.

A block-local variable stores error code but btrfs_get_blocks_direct may
not return it in the end as there's a ret defined in the function scope.

Fixes: d187663ef24c ("Btrfs: lock extents as we map them in DIO")
Signed-off-by: David Sterba 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

Btrfs: don't delay inode ref updates during log replay

2015-01-16T14:59:02+00:00

commit 6f8960541b1eb6054a642da48daae2320fddba93 upstream.

Commit 1d52c78afbb (Btrfs: try not to ENOSPC on log replay) added a
check to skip delayed inode updates during log replay because it
confuses the enospc code.  But the delayed processing will end up
ignoring delayed refs from log replay because the inode itself wasn't
put through the delayed code.

This can end up triggering a warning at commit time:

WARNING: CPU: 2 PID: 778 at fs/btrfs/delayed-inode.c:1410 btrfs_assert_delayed_root_empty+0x32/0x34()

Which is repeated for each commit because we never process the delayed
inode ref update.

The fix used here is to change btrfs_delayed_delete_inode_ref to return
an error if we're currently in log replay.  The caller will do the ref
deletion immediately and everything will work properly.

Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix fs corruption on transaction abort if device supports discard

2015-01-08T17:58:17+00:00

commit 678886bdc6378c1cbd5072da2c5a3035000214e3 upstream.

When we abort a transaction we iterate over all the ranges marked as dirty
in fs_info->freed_extents[0] and fs_info->freed_extents[1], clear them
from those trees, add them back (unpin) to the free space caches and, if
the fs was mounted with "-o discard", perform a discard on those regions.
Also, after adding the regions to the free space caches, a fitrim ioctl call
can see those ranges in a block group's free space cache and perform a discard
on the ranges, so the same issue can happen without "-o discard" as well.

This causes corruption, affecting one or multiple btree nodes (in the worst
case leaving the fs unmountable) because some of those ranges (the ones in
the fs_info->pinned_extents tree) correspond to btree nodes/leafs that are
referred by the last committed super block - breaking the rule that anything
that was committed by a transaction is untouched until the next transaction
commits successfully.

I ran into this while running in a loop (for several hours) the fstest that
I recently submitted:

  [PATCH] fstests: add btrfs test to stress chunk allocation/removal and fstrim

The corruption always happened when a transaction aborted and then fsck complained
like this:

   _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
   *** fsck.btrfs output ***
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   read block failed check_tree_block
   Couldn't open file system

In this case 94945280 corresponded to the root of a tree.
Using frace what I observed was the following sequence of steps happened:

   1) transaction N started, fs_info->pinned_extents pointed to
      fs_info->freed_extents[0];

   2) node/eb 94945280 is created;

   3) eb is persisted to disk;

   4) transaction N commit starts, fs_info->pinned_extents now points to
      fs_info->freed_extents[1], and transaction N completes;

   5) transaction N + 1 starts;

   6) eb is COWed, and btrfs_free_tree_block() called for this eb;

   7) eb range (94945280 to 94945280 + 16Kb) is added to
      fs_info->pinned_extents (fs_info->freed_extents[1]);

   8) Something goes wrong in transaction N + 1, like hitting ENOSPC
      for example, and the transaction is aborted, turning the fs into
      readonly mode. The stack trace I got for example:

      [112065.253935]  [] dump_stack+0x4d/0x66
      [112065.254271]  [] warn_slowpath_common+0x7f/0x98
      [112065.254567]  [] ? __btrfs_abort_transaction+0x50/0x10b [btrfs]
      [112065.261674]  [] warn_slowpath_fmt+0x48/0x50
      [112065.261922]  [] ? btrfs_free_path+0x26/0x29 [btrfs]
      [112065.262211]  [] __btrfs_abort_transaction+0x50/0x10b [btrfs]
      [112065.262545]  [] btrfs_remove_chunk+0x537/0x58b [btrfs]
      [112065.262771]  [] btrfs_delete_unused_bgs+0x1de/0x21b [btrfs]
      [112065.263105]  [] cleaner_kthread+0x100/0x12f [btrfs]
      (...)
      [112065.264493] ---[ end trace dd7903a975a31a08 ]---
      [112065.264673] BTRFS: error (device sdc) in btrfs_remove_chunk:2625: errno=-28 No space left
      [112065.264997] BTRFS info (device sdc): forced readonly

   9) The clear kthread sees that the BTRFS_FS_STATE_ERROR bit is set in
      fs_info->fs_state and calls btrfs_cleanup_transaction(), which in
      turn calls btrfs_destroy_pinned_extent();

   10) Then btrfs_destroy_pinned_extent() iterates over all the ranges
       marked as dirty in fs_info->freed_extents[], and for each one
       it calls discard, if the fs was mounted with "-o discard", and
       adds the range to the free space cache of the respective block
       group;

   11) btrfs_trim_block_group(), invoked from the fitrim ioctl code path,
       sees the free space entries and performs a discard;

   12) After an umount and mount (or fsck), our eb's location on disk was full
       of zeroes, and it should have been untouched, because it was marked as
       dirty in the fs_info->pinned_extents tree, and therefore used by the
       trees that the last committed superblock points to.

Fix this by not performing a discard and not adding the ranges to the free space
caches - it's useless from this point since the fs is now in readonly mode and
we won't write free space caches to disk anymore (otherwise we would leak space)
nor any new superblock. By not adding the ranges to the free space caches, it
prevents other code paths from allocating that space and write to it as well,
therefore being safer and simpler.

This isn't a new problem, as it's been present since 2011 (git commit
acce952b0263825da32cf10489413dec78053347).

Signed-off-by: Filipe Manana 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

Btrfs: do not move em to modified list when unpinning

2015-01-08T17:58:17+00:00

commit a28046956c71985046474283fa3bcd256915fb72 upstream.

We use the modified list to keep track of which extents have been modified so we
know which ones are candidates for logging at fsync() time.  Newly modified
extents are added to the list at modification time, around the same time the
ordered extent is created.  We do this so that we don't have to wait for ordered
extents to complete before we know what we need to log.  The problem is when
something like this happens

log extent 0-4k on inode 1
copy csum for 0-4k from ordered extent into log
sync log
commit transaction
log some other extent on inode 1
ordered extent for 0-4k completes and adds itself onto modified list again
log changed extents
see ordered extent for 0-4k has already been logged
	at this point we assume the csum has been copied
sync log
crash

On replay we will see the extent 0-4k in the log, drop the original 0-4k extent
which is the same one that we are replaying which also drops the csum, and then
we won't find the csum in the log for that bytenr.  This of course causes us to
have errors about not having csums for certain ranges of our inode.  So remove
the modified list manipulation in unpin_extent_cache, any modified extents
should have been added well before now, and we don't want them re-logged.  This
fixes my test that I could reliably reproduce this problem with.  Thanks,

Signed-off-by: Josef Bacik 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup

2014-11-14T16:48:01+00:00

commit 6e5aafb27419f32575b27ef9d6a31e5d54661aca upstream.

If we hit any errors in btrfs_lookup_csums_range, we'll loop through all
the csums we allocate and free them.  But the code was using list_entry
incorrectly, and ended up trying to free the on-stack list_head instead.

This bug came from commit 0678b6185

btrfs: Don't BUG_ON kzalloc error in btrfs_lookup_csums_range()

Signed-off-by: Chris Mason 
Reported-by: Erik Berg 
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix race in WAIT_SYNC ioctl

2014-10-30T16:35:09+00:00

commit 42383020beb1cfb05f5d330cc311931bc4917a97 upstream.

We check whether transid is already committed via last_trans_committed and
then search through trans_list for pending transactions.  If
last_trans_committed is updated by btrfs_commit_transaction after we check
it (there is no locking), we will fail to find the committed transaction
and return EINVAL to the caller.  This has been observed occasionally by
ceph-osd (which uses this ioctl heavily).

Fix by rechecking whether the provided transid <= last_trans_committed
after the search fails, and if so return 0.

Signed-off-by: Sage Weil 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

Btrfs: fix build_backref_tree issue with multiple shared blocks

2014-10-30T16:35:09+00:00

commit bbe9051441effce51c9a533d2c56440df64db2d7 upstream.

Marc Merlin sent me a broken fs image months ago where it would blow up in the
upper->checked BUG_ON() in build_backref_tree.  This is because we had a
scenario like this

block a -- level 4 (not shared)
   |
block b -- level 3 (reloc block, shared)
   |
block c -- level 2 (not shared)
   |
block d -- level 1 (shared)
   |
block e -- level 0 (shared)

We go to build a backref tree for block e, we notice block d is shared and add
it to the list of blocks to lookup it's backrefs for.  Now when we loop around
we will check edges for the block, so we will see we looked up block c last
time.  So we lookup block d and then see that the block that points to it is
block c and we can just skip that edge since we've already been up this path.
The problem is because we clear need_check when we see block d (as it is shared)
we never add block b as needing to be checked.  And because block c is in our
path already we bail out before we walk up to block b and add it to the backref
check list.

To fix this we need to reset need_check if we trip over a block that doesn't
need to be checked.  This will make sure that any subsequent blocks in the path
as we're walking up afterwards are added to the list to be processed.  With this
patch I can now mount Marc's fs image and it'll complete the balance without
panicing.  Thanks,

Reported-by: Marc MERLIN 
Signed-off-by: Josef Bacik 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman

Btrfs: try not to ENOSPC on log replay

2014-10-30T16:35:09+00:00

commit 1d52c78afbbf80b58299e076a159617d6b42fe3c upstream.

When doing log replay we may have to update inodes, which traditionally goes
through our delayed inode stuff.  This will try to move space over from the
trans handle, but we don't reserve space in our trans handle on replay since we
don't know how much we will need, so instead we try to flush.  But because we
have a trans handle open we won't flush anything, so if we are out of reserve
space we will simply return ENOSPC.  Since we know that if an operation made it
into the log then we definitely had space before the box bought the farm then we
don't need to worry about doing this space reservation.  Use the
fs_info->log_root_recovering flag to skip the delayed inode stuff and update the
item directly.  Thanks,

Signed-off-by: Josef Bacik 
Signed-off-by: Chris Mason 
Signed-off-by: Greg Kroah-Hartman