linux.git/fs/debugfs, branch v5.0.4

debugfs: debugfs_lookup() should return NULL if not found

2019-01-30T11:39:49+00:00

Lots of callers of debugfs_lookup() were just checking NULL to see if
the file/directory was found or not.  By changing this in ff9fb72bc077
("debugfs: return error values, not NULL") we caused some subsystems to
easily crash.

Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Reported-by: syzbot+b382ba6a802a3d242790@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa 
Cc: Omar Sandoval 
Cc: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

debugfs: return error values, not NULL

2019-01-29T20:28:35+00:00

When an error happens, debugfs should return an error pointer value, not
NULL.  This will prevent the totally theoretical error where a debugfs
call fails due to lack of memory, returning NULL, and that dentry value
is then passed to another debugfs call, which would end up succeeding,
creating a file at the root of the debugfs tree, but would then be
impossible to remove (because you can not remove the directory NULL).

So, to make everyone happy, always return errors, this makes the users
of debugfs much simpler (they do not have to ever check the return
value), and everyone can rest easy.

Reported-by: Gary R Hook 
Reported-by: Heiko Carstens 
Reported-by: Masami Hiramatsu 
Reported-by: Michal Hocko 
Reported-by: Sebastian Andrzej Siewior 
Reported-by: Ulf Hansson 
Reviewed-by: Masami Hiramatsu 
Reviewed-by: Sebastian Andrzej Siewior 
Signed-off-by: Greg Kroah-Hartman

debugfs: fix debugfs_rename parameter checking

2019-01-25T11:56:32+00:00

debugfs_rename() needs to check that the dentries passed into it really
are valid, as sometimes they are not (i.e. if the return value of
another debugfs call is passed into this one.)  So fix this up by
properly checking if the two parent directories are errors (they are
allowed to be NULL), and if the dentry to rename is not NULL or an
error.

Cc: stable 
Signed-off-by: Greg Kroah-Hartman

Revert "debugfs: inode: debugfs_create_dir uses mode permission from parent"

2018-06-13T03:52:16+00:00

This reverts commit 95cde3c59966f6371b6bcd9e4e2da2ba64ee9775.

The commit had good intentions, but it breaks kvm-tool and qemu-kvm.

With it in place, "lkvm run" just fails with

  Error: KVM_CREATE_VM ioctl
  Warning: Failed init: kvm__init

which isn't a wonderful error message, but bisection pinpointed the
problematic commit.

The problem is almost certainly due to the special kvm debugfs entries
created dynamically by kvm under /sys/kernel/debug/kvm/.  See
kvm_create_vm_debugfs()

Bisected-and-reported-by: Linus Torvalds 
Cc: Wanpeng Li 
Cc: Greg Kroah-Hartman 
Cc: Thomas Richter 
Cc: Kees Cook 
Signed-off-by: Linus Torvalds

debugfs: inode: debugfs_create_dir uses mode permission from parent

2018-05-14T14:48:18+00:00

Currently function debugfs_create_dir() creates a new
directory in the debugfs (usually mounted /sys/kernel/debug)
with permission rwxr-xr-x. This is hard coded.

Change this to use the parent directory permission.

Output before the patch:
root@s8360047 ~]# tree -dp -L 1 /sys/kernel/debug/
/sys/kernel/debug/
├── [drwxr-xr-x]  bdi
├── [drwxr-xr-x]  block
├── [drwxr-xr-x]  dasd
├── [drwxr-xr-x]  device_component
├── [drwxr-xr-x]  extfrag
├── [drwxr-xr-x]  hid
├── [drwxr-xr-x]  kprobes
├── [drwxr-xr-x]  kvm
├── [drwxr-xr-x]  memblock
├── [drwxr-xr-x]  pm_qos
├── [drwxr-xr-x]  qdio
├── [drwxr-xr-x]  s390
├── [drwxr-xr-x]  s390dbf
└── [drwx------]  tracing

14 directories
[root@s8360047 linux]#

Output after the patch:
[root@s8360047 ~]# tree -dp -L 1 /sys/kernel/debug/
sys/kernel/debug/
├── [drwx------]  bdi
├── [drwx------]  block
├── [drwx------]  dasd
├── [drwx------]  device_component
├── [drwx------]  extfrag
├── [drwx------]  hid
├── [drwx------]  kprobes
├── [drwx------]  kvm
├── [drwx------]  memblock
├── [drwx------]  pm_qos
├── [drwx------]  qdio
├── [drwx------]  s390
├── [drwx------]  s390dbf
└── [drwx------]  tracing

14 directories
[root@s8360047 linux]#

Here is the full diff output done with:
[root@s8360047 ~]# diff -u treefull.before treefull.after |
	sed 's-^- # -' > treefull.diff
 # --- treefull.before	2018-04-27 13:22:04.532824564 +0200
 # +++ treefull.after	2018-04-27 13:24:12.106182062 +0200
 # @@ -1,55 +1,55 @@
 #  /sys/kernel/debug/
 # -├── [drwxr-xr-x]  bdi
 # -│   ├── [drwxr-xr-x]  1:0
 # -│   ├── [drwxr-xr-x]  1:1
 # -│   ├── [drwxr-xr-x]  1:10
 # -│   ├── [drwxr-xr-x]  1:11
 # -│   ├── [drwxr-xr-x]  1:12
 # -│   ├── [drwxr-xr-x]  1:13
 # -│   ├── [drwxr-xr-x]  1:14
 # -│   ├── [drwxr-xr-x]  1:15
 # -│   ├── [drwxr-xr-x]  1:2
 # -│   ├── [drwxr-xr-x]  1:3
 # -│   ├── [drwxr-xr-x]  1:4
 # -│   ├── [drwxr-xr-x]  1:5
 # -│   ├── [drwxr-xr-x]  1:6
 # -│   ├── [drwxr-xr-x]  1:7
 # -│   ├── [drwxr-xr-x]  1:8
 # -│   ├── [drwxr-xr-x]  1:9
 # -│   └── [drwxr-xr-x]  94:0
 # -├── [drwxr-xr-x]  block
 # -├── [drwxr-xr-x]  dasd
 # -│   ├── [drwxr-xr-x]  0.0.e18a
 # -│   ├── [drwxr-xr-x]  dasda
 # -│   └── [drwxr-xr-x]  global
 # -├── [drwxr-xr-x]  device_component
 # -├── [drwxr-xr-x]  extfrag
 # -├── [drwxr-xr-x]  hid
 # -├── [drwxr-xr-x]  kprobes
 # -├── [drwxr-xr-x]  kvm
 # -├── [drwxr-xr-x]  memblock
 # -├── [drwxr-xr-x]  pm_qos
 # -├── [drwxr-xr-x]  qdio
 # -│   └── [drwxr-xr-x]  0.0.f5f2
 # -├── [drwxr-xr-x]  s390
 # -│   └── [drwxr-xr-x]  stsi
 # -├── [drwxr-xr-x]  s390dbf
 # -│   ├── [drwxr-xr-x]  0.0.e18a
 # -│   ├── [drwxr-xr-x]  cio_crw
 # -│   ├── [drwxr-xr-x]  cio_msg
 # -│   ├── [drwxr-xr-x]  cio_trace
 # -│   ├── [drwxr-xr-x]  dasd
 # -│   ├── [drwxr-xr-x]  kvm-trace
 # -│   ├── [drwxr-xr-x]  lgr
 # -│   ├── [drwxr-xr-x]  qdio_0.0.f5f2
 # -│   ├── [drwxr-xr-x]  qdio_error
 # -│   ├── [drwxr-xr-x]  qdio_setup
 # -│   ├── [drwxr-xr-x]  qeth_card_0.0.f5f0
 # -│   ├── [drwxr-xr-x]  qeth_control
 # -│   ├── [drwxr-xr-x]  qeth_msg
 # -│   ├── [drwxr-xr-x]  qeth_setup
 # -│   ├── [drwxr-xr-x]  vmcp
 # -│   └── [drwxr-xr-x]  vmur
 # +├── [drwx------]  bdi
 # +│   ├── [drwx------]  1:0
 # +│   ├── [drwx------]  1:1
 # +│   ├── [drwx------]  1:10
 # +│   ├── [drwx------]  1:11
 # +│   ├── [drwx------]  1:12
 # +│   ├── [drwx------]  1:13
 # +│   ├── [drwx------]  1:14
 # +│   ├── [drwx------]  1:15
 # +│   ├── [drwx------]  1:2
 # +│   ├── [drwx------]  1:3
 # +│   ├── [drwx------]  1:4
 # +│   ├── [drwx------]  1:5
 # +│   ├── [drwx------]  1:6
 # +│   ├── [drwx------]  1:7
 # +│   ├── [drwx------]  1:8
 # +│   ├── [drwx------]  1:9
 # +│   └── [drwx------]  94:0
 # +├── [drwx------]  block
 # +├── [drwx------]  dasd
 # +│   ├── [drwx------]  0.0.e18a
 # +│   ├── [drwx------]  dasda
 # +│   └── [drwx------]  global
 # +├── [drwx------]  device_component
 # +├── [drwx------]  extfrag
 # +├── [drwx------]  hid
 # +├── [drwx------]  kprobes
 # +├── [drwx------]  kvm
 # +├── [drwx------]  memblock
 # +├── [drwx------]  pm_qos
 # +├── [drwx------]  qdio
 # +│   └── [drwx------]  0.0.f5f2
 # +├── [drwx------]  s390
 # +│   └── [drwx------]  stsi
 # +├── [drwx------]  s390dbf
 # +│   ├── [drwx------]  0.0.e18a
 # +│   ├── [drwx------]  cio_crw
 # +│   ├── [drwx------]  cio_msg
 # +│   ├── [drwx------]  cio_trace
 # +│   ├── [drwx------]  dasd
 # +│   ├── [drwx------]  kvm-trace
 # +│   ├── [drwx------]  lgr
 # +│   ├── [drwx------]  qdio_0.0.f5f2
 # +│   ├── [drwx------]  qdio_error
 # +│   ├── [drwx------]  qdio_setup
 # +│   ├── [drwx------]  qeth_card_0.0.f5f0
 # +│   ├── [drwx------]  qeth_control
 # +│   ├── [drwx------]  qeth_msg
 # +│   ├── [drwx------]  qeth_setup
 # +│   ├── [drwx------]  vmcp
 # +│   └── [drwx------]  vmur
 #  └── [drwx------]  tracing
 #      ├── [drwxr-xr-x]  events
 #      │   ├── [drwxr-xr-x]  alarmtimer

Fixes: edac65eaf8d5c ("debugfs: take mode-dependent parts of debugfs_get_inode() into callers")
Signed-off-by: Thomas Richter 
Reviewed-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

debugfs: Re-use kstrtobool_from_user()

2018-05-14T14:48:18+00:00

Re-use kstrtobool_from_user() instead of open coded variant.

Signed-off-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

debugfs_lookup(): switch to lookup_one_len_unlocked()

2018-03-29T19:07:47+00:00

Signed-off-by: Al Viro

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro 
Signed-off-by: Linus Torvalds

use linux/poll.h instead of asm/poll.h

2018-02-01T21:23:11+00:00

The only place that has any business including asm/poll.h
is linux/poll.h.  Fortunately, asm/poll.h had only been
included in 3 places beyond that one, and all of them
are trivial to switch to using linux/poll.h.

Signed-off-by: Al Viro

fs: annotate ->poll() instances

2017-11-27T21:20:05+00:00

Signed-off-by: Al Viro