linux.git/fs/exec.c, branch v3.10.65

metag: Reduce maximum stack size to 256MB

2014-06-07T20:25:38+00:00

commit d71f290b4e98a39f49f2595a13be3b4d5ce8e1f1 upstream.

Specify the maximum stack size for arches where the stack grows upward
(parisc and metag) in asm/processor.h rather than hard coding in
fs/exec.c so that metag can specify a smaller value of 256MB rather than
1GB.

This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased
beyond a safe value by root. E.g. when starting a process after running
"ulimit -H -s unlimited" it will then attempt to use a stack size of the
maximum 1GB which is far too big for metag's limited user virtual
address space (stack_top is usually 0x3ffff000):

BUG: failure at fs/exec.c:589/shift_arg_pages()!

Signed-off-by: James Hogan 
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin 
Signed-off-by: Greg Kroah-Hartman

exec/ptrace: fix get_dumpable() incorrect tests

2013-11-29T19:11:44+00:00

commit d049f74f2dbe71354d43d393ac3a188947811348 upstream.

The get_dumpable() return value is not boolean.  Most users of the
function actually want to be testing for non-SUID_DUMP_USER(1) rather than
SUID_DUMP_DISABLE(0).  The SUID_DUMP_ROOT(2) is also considered a
protected state.  Almost all places did this correctly, excepting the two
places fixed in this patch.

Wrong logic:
    if (dumpable == SUID_DUMP_DISABLE) { /* be protective */ }
        or
    if (dumpable == 0) { /* be protective */ }
        or
    if (!dumpable) { /* be protective */ }

Correct logic:
    if (dumpable != SUID_DUMP_USER) { /* be protective */ }
        or
    if (dumpable != 1) { /* be protective */ }

Without this patch, if the system had set the sysctl fs/suid_dumpable=2, a
user was able to ptrace attach to processes that had dropped privileges to
that user.  (This may have been partially mitigated if Yama was enabled.)

The macros have been moved into the file that declares get/set_dumpable(),
which means things like the ia64 code can see them too.

CVE-2013-2929

Reported-by: Vasily Kulikov 
Signed-off-by: Kees Cook 
Cc: "Luck, Tony" 
Cc: Oleg Nesterov 
Cc: "Eric W. Biederman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Fix TLB gather virtual address range invalidation corner cases

2013-08-20T15:43:05+00:00

commit 2b047252d087be7f2ba088b4933cd904f92e6fce upstream.

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc67f97 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c3580b7 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin 
Build-testing-by: Stephen Rothwell 
Build-testing-by: Richard Weinberger 
Reviewed-by: Michal Hocko 
Acked-by: Peter Zijlstra 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

perf: Disable monitoring on setuid processes for regular users

2013-06-26T09:40:18+00:00

There was a a bug in setup_new_exec(), whereby
the test to disabled perf monitoring was not
correct because the new credentials for the
process were not yet committed and therefore
the get_dumpable() test was never firing.

The patch fixes the problem by moving the
perf_event test until after the credentials
are committed.

Signed-off-by: Stephane Eranian 
Tested-by: Jiri Olsa 
Acked-by: Peter Zijlstra 
Cc: 
Signed-off-by: Ingo Molnar

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-05-02T00:51:54+00:00

Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...

exec: do not abuse ->cred_guard_mutex in threadgroup_lock()

2013-05-01T00:04:07+00:00

threadgroup_lock() takes signal->cred_guard_mutex to ensure that
thread_group_leader() is stable.  This doesn't look nice, the scope of
this lock in do_execve() is huge.

And as Dave pointed out this can lead to deadlock, we have the
following dependencies:

	do_execve:		cred_guard_mutex -> i_mutex
	cgroup_mount:		i_mutex -> cgroup_mutex
	attach_task_by_pid:	cgroup_mutex -> cred_guard_mutex

Change de_thread() to take threadgroup_change_begin() around the
switch-the-leader code and change threadgroup_lock() to avoid
->cred_guard_mutex.

Note that de_thread() can't sleep with ->group_rwsem held, this can
obviously deadlock with the exiting leader if the writer is active, so it
does threadgroup_change_end() before schedule().

Reported-by: Dave Jones 
Acked-by: Tejun Heo 
Acked-by: Li Zefan 
Signed-off-by: Oleg Nesterov 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

set_task_comm: kill the pointless memset() + wmb()

2013-05-01T00:04:07+00:00

set_task_comm() does memset() + wmb() before strlcpy().  This buys
nothing and to add to the confusion, the comment is wrong.

- We do not need memset() to be "safe from non-terminating string
  reads", the final char is always zero and we never change it.

- wmb() is paired with nothing, it cannot prevent from printing
  the mixture of the old/new data unless the reader takes the lock.

Signed-off-by: Oleg Nesterov 
Cc: Andi Kleen 
Cc: John Stultz 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: allow arch code to control the user page table ceiling

2013-04-29T22:54:34+00:00

On architectures where a pgd entry may be shared between user and kernel
(e.g.  ARM+LPAE), freeing page tables needs a ceiling other than 0.
This patch introduces a generic USER_PGTABLES_CEILING that arch code can
override.  It is the responsibility of the arch code setting the ceiling
to ensure the complete freeing of the page tables (usually in
pgd_free()).

[catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes]
Signed-off-by: Hugh Dickins 
Signed-off-by: Catalin Marinas 
Cc: Russell King 
Cc: 	[3.3+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

new helper: read_code()

2013-04-29T19:40:23+00:00

switch binfmts that use ->read() to that (and to kernel_read()
in several cases in binfmt_flat - sure, it's nommu, but still,
doing ->read() into kmalloc'ed buffer...)

Signed-off-by: Al Viro

coredump: remove redundant defines for dumpable states

2013-02-28T03:10:11+00:00

The existing SUID_DUMP_* defines duplicate the newer SUID_DUMPABLE_*
defines introduced in 54b501992dd2 ("coredump: warn about unsafe
suid_dumpable / core_pattern combo").  Remove the new ones, and use the
prior values instead.

Signed-off-by: Kees Cook 
Reported-by: Chen Gang 
Cc: Alexander Viro 
Cc: Alan Cox 
Cc: "Eric W. Biederman" 
Cc: Doug Ledford 
Cc: Serge Hallyn 
Cc: James Morris 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds