linux.git/fs/ext4/inline.c, branch v6.18.21 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio 2026-04-02T11:23:27+00:00 Yuto Ohnuki ytohnuki@amazon.com 2026-02-23T12:33:46+00:00 823849a26af089ffc5dfdd2ae4b9d446b46a0cda commit 356227096eb66e41b23caf7045e6304877322edf upstream. Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Link: https://patch.msgid.link/20260223123345.14838-2-ytohnuki@amazon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 356227096eb66e41b23caf7045e6304877322edf upstream.

Replace BUG_ON() with proper error handling when inline data size
exceeds PAGE_SIZE. This prevents kernel panic and allows the system to
continue running while properly reporting the filesystem corruption.

The error is logged via ext4_error_inode(), the buffer head is released
to prevent memory leak, and -EFSCORRUPTED is returned to indicate
filesystem corruption.

Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Link: https://patch.msgid.link/20260223123345.14838-2-ytohnuki@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: add i_data_sem protection in ext4_destroy_inline_data_nolock() 2025-12-12T17:42:45+00:00 Alexey Nepomnyashih sdl@nppct.ru 2025-11-04T09:33:25+00:00 5cad18e527ba8a9ca5463cc170073eeb5a4826f4 commit 0cd8feea8777f8d9b9a862b89c688b049a5c8475 upstream. Fix a race between inline data destruction and block mapping. The function ext4_destroy_inline_data_nolock() changes the inode data layout by clearing EXT4_INODE_INLINE_DATA and setting EXT4_INODE_EXTENTS. At the same time, another thread may execute ext4_map_blocks(), which tests EXT4_INODE_EXTENTS to decide whether to call ext4_ext_map_blocks() or ext4_ind_map_blocks(). Without i_data_sem protection, ext4_ind_map_blocks() may receive inode with EXT4_INODE_EXTENTS flag and triggering assert. kernel BUG at fs/ext4/indirect.c:546! EXT4-fs (loop2): unmounting filesystem. invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:ext4_ind_map_blocks.cold+0x2b/0x5a fs/ext4/indirect.c:546 Call Trace: <TASK> ext4_map_blocks+0xb9b/0x16f0 fs/ext4/inode.c:681 _ext4_get_block+0x242/0x590 fs/ext4/inode.c:822 ext4_block_write_begin+0x48b/0x12c0 fs/ext4/inode.c:1124 ext4_write_begin+0x598/0xef0 fs/ext4/inode.c:1255 ext4_da_write_begin+0x21e/0x9c0 fs/ext4/inode.c:3000 generic_perform_write+0x259/0x5d0 mm/filemap.c:3846 ext4_buffered_write_iter+0x15b/0x470 fs/ext4/file.c:285 ext4_file_write_iter+0x8e0/0x17f0 fs/ext4/file.c:679 call_write_iter include/linux/fs.h:2271 [inline] do_iter_readv_writev+0x212/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10f/0x170 fs/splice.c:950 splice_direct_to_actor+0x33a/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: c755e251357a ("ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru> Message-ID: <20251104093326.697381-1-sdl@nppct.ru> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0cd8feea8777f8d9b9a862b89c688b049a5c8475 upstream.

Fix a race between inline data destruction and block mapping.

The function ext4_destroy_inline_data_nolock() changes the inode data
layout by clearing EXT4_INODE_INLINE_DATA and setting EXT4_INODE_EXTENTS.
At the same time, another thread may execute ext4_map_blocks(), which
tests EXT4_INODE_EXTENTS to decide whether to call ext4_ext_map_blocks()
or ext4_ind_map_blocks().

Without i_data_sem protection, ext4_ind_map_blocks() may receive inode
with EXT4_INODE_EXTENTS flag and triggering assert.

kernel BUG at fs/ext4/indirect.c:546!
EXT4-fs (loop2): unmounting filesystem.
invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:ext4_ind_map_blocks.cold+0x2b/0x5a fs/ext4/indirect.c:546

Call Trace:
 <TASK>
 ext4_map_blocks+0xb9b/0x16f0 fs/ext4/inode.c:681
 _ext4_get_block+0x242/0x590 fs/ext4/inode.c:822
 ext4_block_write_begin+0x48b/0x12c0 fs/ext4/inode.c:1124
 ext4_write_begin+0x598/0xef0 fs/ext4/inode.c:1255
 ext4_da_write_begin+0x21e/0x9c0 fs/ext4/inode.c:3000
 generic_perform_write+0x259/0x5d0 mm/filemap.c:3846
 ext4_buffered_write_iter+0x15b/0x470 fs/ext4/file.c:285
 ext4_file_write_iter+0x8e0/0x17f0 fs/ext4/file.c:679
 call_write_iter include/linux/fs.h:2271 [inline]
 do_iter_readv_writev+0x212/0x3c0 fs/read_write.c:735
 do_iter_write+0x186/0x710 fs/read_write.c:861
 vfs_iter_write+0x70/0xa0 fs/read_write.c:902
 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685
 do_splice_from fs/splice.c:763 [inline]
 direct_splice_actor+0x10f/0x170 fs/splice.c:950
 splice_direct_to_actor+0x33a/0xa10 fs/splice.c:896
 do_splice_direct+0x1a9/0x280 fs/splice.c:1002
 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255
 __do_sys_sendfile64 fs/read_write.c:1323 [inline]
 __se_sys_sendfile64 fs/read_write.c:1309 [inline]
 __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Fixes: c755e251357a ("ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Message-ID: <20251104093326.697381-1-sdl@nppct.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: refresh inline data size before write operations 2025-12-12T17:42:44+00:00 Deepanshu Kartikey kartikey406@gmail.com 2025-10-20T06:09:36+00:00 58df743faf21ceb1880f930aa5dd428e2a5e415d commit 892e1cf17555735e9d021ab036c36bc7b58b0e3b upstream. The cached ei->i_inline_size can become stale between the initial size check and when ext4_update_inline_data()/ext4_create_inline_data() use it. Although ext4_get_max_inline_size() reads the correct value at the time of the check, concurrent xattr operations can modify i_inline_size before ext4_write_lock_xattr() is acquired. This causes ext4_update_inline_data() and ext4_create_inline_data() to work with stale capacity values, leading to a BUG_ON() crash in ext4_write_inline_data(): kernel BUG at fs/ext4/inline.c:1331! BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); The race window: 1. ext4_get_max_inline_size() reads i_inline_size = 60 (correct) 2. Size check passes for 50-byte write 3. [Another thread adds xattr, i_inline_size changes to 40] 4. ext4_write_lock_xattr() acquires lock 5. ext4_update_inline_data() uses stale i_inline_size = 60 6. Attempts to write 50 bytes but only 40 bytes actually available 7. BUG_ON() triggers Fix this by recalculating i_inline_size via ext4_find_inline_data_nolock() immediately after acquiring xattr_sem. This ensures ext4_update_inline_data() and ext4_create_inline_data() work with current values that are protected from concurrent modifications. This is similar to commit a54c4613dac1 ("ext4: fix race writing to an inline_data file while its xattrs are changing") which fixed i_inline_off staleness. This patch addresses the related i_inline_size staleness issue. Reported-by: syzbot+f3185be57d7e8dda32b8@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f3185be57d7e8dda32b8 Cc: stable@kernel.org Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Message-ID: <20251020060936.474314-1-kartikey406@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 892e1cf17555735e9d021ab036c36bc7b58b0e3b upstream.

The cached ei->i_inline_size can become stale between the initial size
check and when ext4_update_inline_data()/ext4_create_inline_data() use
it. Although ext4_get_max_inline_size() reads the correct value at the
time of the check, concurrent xattr operations can modify i_inline_size
before ext4_write_lock_xattr() is acquired.

This causes ext4_update_inline_data() and ext4_create_inline_data() to
work with stale capacity values, leading to a BUG_ON() crash in
ext4_write_inline_data():

  kernel BUG at fs/ext4/inline.c:1331!
  BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

The race window:
1. ext4_get_max_inline_size() reads i_inline_size = 60 (correct)
2. Size check passes for 50-byte write
3. [Another thread adds xattr, i_inline_size changes to 40]
4. ext4_write_lock_xattr() acquires lock
5. ext4_update_inline_data() uses stale i_inline_size = 60
6. Attempts to write 50 bytes but only 40 bytes actually available
7. BUG_ON() triggers

Fix this by recalculating i_inline_size via ext4_find_inline_data_nolock()
immediately after acquiring xattr_sem. This ensures ext4_update_inline_data()
and ext4_create_inline_data() work with current values that are protected
from concurrent modifications.

This is similar to commit a54c4613dac1 ("ext4: fix race writing to an
inline_data file while its xattrs are changing") which fixed i_inline_off
staleness. This patch addresses the related i_inline_size staleness issue.

Reported-by: syzbot+f3185be57d7e8dda32b8@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=f3185be57d7e8dda32b8
Cc: stable@kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Message-ID: <20251020060936.474314-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr 2025-07-25T13:14:17+00:00 Theodore Ts'o tytso@mit.edu 2025-07-17T14:54:34+00:00 099b847ccc6c1ad2f805d13cfbcc83f5b6d4bc42 A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data() when an inode had the INLINE_DATA_FL flag set but was missing the system.data extended attribute. Since this can happen due to a maiciouly fuzzed file system, we shouldn't BUG, but rather, report it as a corrupted file system. Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii ext4_create_inline_data() and ext4_inline_data_truncate(). Reported-by: syzbot+544248a761451c0df72f@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data()
when an inode had the INLINE_DATA_FL flag set but was missing the
system.data extended attribute.

Since this can happen due to a maiciouly fuzzed file system, we
shouldn't BUG, but rather, report it as a corrupted file system.

Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii
ext4_create_inline_data() and ext4_inline_data_truncate().

Reported-by: syzbot+544248a761451c0df72f@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4: refactor the inline directory conversion and new directory codepaths 2025-07-18T03:25:21+00:00 Theodore Ts'o tytso@mit.edu 2025-07-12T18:12:49+00:00 90f097b1403f232a202c501bfd49b1b196e840ea There was a lot of common code in the codepaths used to convert an inline directory and to creaet a new directory. To address this, rename ext4_init_dot_dotdot() to ext4_init_dirblock() and then move common code into that function. This reduces the lines of code count in fs/ext4/inline.c and fs/ext4/namei.c, as well as reducing the size of their object files. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://patch.msgid.link/20250712181249.434530-3-tytso@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
There was a lot of common code in the codepaths used to convert an
inline directory and to creaet a new directory.  To address this,
rename ext4_init_dot_dotdot() to ext4_init_dirblock() and then move
common code into that function.

This reduces the lines of code count in fs/ext4/inline.c and
fs/ext4/namei.c, as well as reducing the size of their object files.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20250712181249.434530-3-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4: use memcpy() instead of strcpy() 2025-07-18T03:25:21+00:00 Theodore Ts'o tytso@mit.edu 2025-07-12T18:12:48+00:00 a35454ecf8a320c49954fdcdae0e8d3323067632 The strcpy() function is considered dangerous and eeeevil by people who are using sophisticated code analysis tools such as "grep". This is true even when a quick inspection would show that the source is a constant string ("." or "..") and the destination is a fixed array which is guaranteed to have enough space. Make the "grep" code analysis tool happy by using memcpy() isstead of strcpy(). :-) Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://patch.msgid.link/20250712181249.434530-2-tytso@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
The strcpy() function is considered dangerous and eeeevil by people
who are using sophisticated code analysis tools such as "grep".  This
is true even when a quick inspection would show that the source is a
constant string ("." or "..") and the destination is a fixed array
which is guaranteed to have enough space.  Make the "grep" code
analysis tool happy by using memcpy() isstead of strcpy().  :-)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20250712181249.434530-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4: Make sure BH_New bit is cleared in ->write_end handler 2025-07-18T03:25:21+00:00 Jan Kara jack@suse.cz 2025-07-09T08:48:32+00:00 91b8ca8b26729b729dda8a4eddb9aceaea706f37 Currently we clear BH_New bit in case of error and also in the standard ext4_write_end() handler (in block_commit_write()). However ext4_journalled_write_end() misses this clearing and thus we are leaving stale BH_New bits behind. Generally ext4_block_write_begin() clears these bits before any harm can be done but in case blocksize < pagesize and we hit some error when processing a page with these stale bits, we'll try to zero buffers with these stale BH_New bits and jbd2 will complain (as buffers were not prepared for writing in this transaction). Fix the problem by clearing BH_New bits in ext4_journalled_write_end() and WARN if ext4_block_write_begin() sees stale BH_New bits. Reported-by: Baolin Liu <liubaolin12138@163.com> Reported-by: Zhi Long <longzhi@sangfor.com.cn> Fixes: 3910b513fcdf ("ext4: persist the new uptodate buffers in ext4_journalled_zero_new_buffers") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250709084831.23876-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Currently we clear BH_New bit in case of error and also in the standard
ext4_write_end() handler (in block_commit_write()). However
ext4_journalled_write_end() misses this clearing and thus we are leaving
stale BH_New bits behind. Generally ext4_block_write_begin() clears
these bits before any harm can be done but in case blocksize < pagesize
and we hit some error when processing a page with these stale bits,
we'll try to zero buffers with these stale BH_New bits and jbd2 will
complain (as buffers were not prepared for writing in this transaction).
Fix the problem by clearing BH_New bits in ext4_journalled_write_end()
and WARN if ext4_block_write_begin() sees stale BH_New bits.

Reported-by: Baolin Liu <liubaolin12138@163.com>
Reported-by: Zhi Long <longzhi@sangfor.com.cn>
Fixes: 3910b513fcdf ("ext4: persist the new uptodate buffers in ext4_journalled_zero_new_buffers")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250709084831.23876-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4: replace ext4_writepage_trans_blocks() 2025-07-14T03:41:52+00:00 Zhang Yi yi.zhang@huawei.com 2025-07-07T14:08:12+00:00 57661f28756c59510e31543520b5b8f5e591f384 After ext4 supports large folios, the semantics of reserving credits in pages is no longer applicable. In most scenarios, reserving credits in extents is sufficient. Therefore, introduce ext4_chunk_trans_extent() to replace ext4_writepage_trans_blocks(). move_extent_per_page() is the only remaining location where we are still processing extents in pages. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250707140814.542883-10-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
After ext4 supports large folios, the semantics of reserving credits in
pages is no longer applicable. In most scenarios, reserving credits in
extents is sufficient. Therefore, introduce ext4_chunk_trans_extent()
to replace ext4_writepage_trans_blocks(). move_extent_per_page() is the
only remaining location where we are still processing extents in pages.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-10-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4: inline: fix len overflow in ext4_prepare_inline_data 2025-05-14T03:02:09+00:00 Thadeu Lima de Souza Cascardo cascardo@igalia.com 2025-04-15T14:53:04+00:00 227cb4ca5a6502164f850d22aec3104d7888b270 When running the following code on an ext4 filesystem with inline_data feature enabled, it will lead to the bug below. fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666); ftruncate(fd, 30); pwrite(fd, "a", 1, (1UL << 40) + 5UL); That happens because write_begin will succeed as when ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len will be truncated, leading to ext4_prepare_inline_data parameter to be 6 instead of 0x10000000006. Then, later when write_end is called, we hit: BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); at ext4_write_inline_data. Fix it by using a loff_t type for the len parameter in ext4_prepare_inline_data instead of an unsigned int. [ 44.545164] ------------[ cut here ]------------ [ 44.545530] kernel BUG at fs/ext4/inline.c:240! [ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb [ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100 [ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49 [ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216 [ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006 [ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738 [ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000 [ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738 [ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000 [ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0 [ 44.546523] PKRU: 55555554 [ 44.546523] Call Trace: [ 44.546523] <TASK> [ 44.546523] ext4_write_inline_data_end+0x126/0x2d0 [ 44.546523] generic_perform_write+0x17e/0x270 [ 44.546523] ext4_buffered_write_iter+0xc8/0x170 [ 44.546523] vfs_write+0x2be/0x3e0 [ 44.546523] __x64_sys_pwrite64+0x6d/0xc0 [ 44.546523] do_syscall_64+0x6a/0xf0 [ 44.546523] ? __wake_up+0x89/0xb0 [ 44.546523] ? xas_find+0x72/0x1c0 [ 44.546523] ? next_uptodate_folio+0x317/0x330 [ 44.546523] ? set_pte_range+0x1a6/0x270 [ 44.546523] ? filemap_map_pages+0x6ee/0x840 [ 44.546523] ? ext4_setattr+0x2fa/0x750 [ 44.546523] ? do_pte_missing+0x128/0xf70 [ 44.546523] ? security_inode_post_setattr+0x3e/0xd0 [ 44.546523] ? ___pte_offset_map+0x19/0x100 [ 44.546523] ? handle_mm_fault+0x721/0xa10 [ 44.546523] ? do_user_addr_fault+0x197/0x730 [ 44.546523] ? do_syscall_64+0x76/0xf0 [ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60 [ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90 [ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 44.546523] RIP: 0033:0x7f42999c6687 [ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff [ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012 [ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687 [ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003 [ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000 [ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000000000000000 [ 44.546523] R13: 00007ffeae4a7ac8 R14: 00007f4299b86000 R15: 000055ea61493dd8 [ 44.546523] </TASK> [ 44.546523] Modules linked in: [ 44.568501] ---[ end trace 0000000000000000 ]--- [ 44.568889] RIP: 0010:ext4_write_inline_data+0xfe/0x100 [ 44.569328] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49 [ 44.570931] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216 [ 44.571356] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006 [ 44.571959] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738 [ 44.572571] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 44.573148] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000 [ 44.573748] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738 [ 44.574335] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000 [ 44.575027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 44.575520] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0 [ 44.576112] PKRU: 55555554 [ 44.576338] Kernel panic - not syncing: Fatal exception [ 44.576517] Kernel Offset: 0x1a600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Reported-by: syzbot+fe2a25dae02a207717a0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fe2a25dae02a207717a0 Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Cc: stable@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://patch.msgid.link/20250415-ext4-prepare-inline-overflow-v1-1-f4c13d900967@igalia.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
When running the following code on an ext4 filesystem with inline_data
feature enabled, it will lead to the bug below.

        fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666);
        ftruncate(fd, 30);
        pwrite(fd, "a", 1, (1UL << 40) + 5UL);

That happens because write_begin will succeed as when
ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len
will be truncated, leading to ext4_prepare_inline_data parameter to be 6
instead of 0x10000000006.

Then, later when write_end is called, we hit:

        BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);

at ext4_write_inline_data.

Fix it by using a loff_t type for the len parameter in
ext4_prepare_inline_data instead of an unsigned int.

[   44.545164] ------------[ cut here ]------------
[   44.545530] kernel BUG at fs/ext4/inline.c:240!
[   44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[   44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full)  112853fcebfdb93254270a7959841d2c6aa2c8bb
[   44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[   44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100
[   44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49
[   44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216
[   44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006
[   44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738
[   44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[   44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000
[   44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738
[   44.546523] FS:  00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000
[   44.546523] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0
[   44.546523] PKRU: 55555554
[   44.546523] Call Trace:
[   44.546523]  <TASK>
[   44.546523]  ext4_write_inline_data_end+0x126/0x2d0
[   44.546523]  generic_perform_write+0x17e/0x270
[   44.546523]  ext4_buffered_write_iter+0xc8/0x170
[   44.546523]  vfs_write+0x2be/0x3e0
[   44.546523]  __x64_sys_pwrite64+0x6d/0xc0
[   44.546523]  do_syscall_64+0x6a/0xf0
[   44.546523]  ? __wake_up+0x89/0xb0
[   44.546523]  ? xas_find+0x72/0x1c0
[   44.546523]  ? next_uptodate_folio+0x317/0x330
[   44.546523]  ? set_pte_range+0x1a6/0x270
[   44.546523]  ? filemap_map_pages+0x6ee/0x840
[   44.546523]  ? ext4_setattr+0x2fa/0x750
[   44.546523]  ? do_pte_missing+0x128/0xf70
[   44.546523]  ? security_inode_post_setattr+0x3e/0xd0
[   44.546523]  ? ___pte_offset_map+0x19/0x100
[   44.546523]  ? handle_mm_fault+0x721/0xa10
[   44.546523]  ? do_user_addr_fault+0x197/0x730
[   44.546523]  ? do_syscall_64+0x76/0xf0
[   44.546523]  ? arch_exit_to_user_mode_prepare+0x1e/0x60
[   44.546523]  ? irqentry_exit_to_user_mode+0x79/0x90
[   44.546523]  entry_SYSCALL_64_after_hwframe+0x55/0x5d
[   44.546523] RIP: 0033:0x7f42999c6687
[   44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
[   44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012
[   44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687
[   44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003
[   44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000
[   44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000000000000000
[   44.546523] R13: 00007ffeae4a7ac8 R14: 00007f4299b86000 R15: 000055ea61493dd8
[   44.546523]  </TASK>
[   44.546523] Modules linked in:
[   44.568501] ---[ end trace 0000000000000000 ]---
[   44.568889] RIP: 0010:ext4_write_inline_data+0xfe/0x100
[   44.569328] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49
[   44.570931] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216
[   44.571356] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006
[   44.571959] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738
[   44.572571] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[   44.573148] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000
[   44.573748] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738
[   44.574335] FS:  00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000
[   44.575027] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   44.575520] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0
[   44.576112] PKRU: 55555554
[   44.576338] Kernel panic - not syncing: Fatal exception
[   44.576517] Kernel Offset: 0x1a600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Reported-by: syzbot+fe2a25dae02a207717a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fe2a25dae02a207717a0
Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20250415-ext4-prepare-inline-overflow-v1-1-f4c13d900967@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4: for committing inode, make ext4_fc_track_inode wait 2025-05-09T01:56:17+00:00 Harshad Shirwadkar harshadshirwadkar@gmail.com 2025-05-08T17:59:01+00:00 4d3266463ed06af2916b306bdb0ebd647726ba49 If the inode that's being requested to track using ext4_fc_track_inode is being committed, then wait until the inode finishes the commit. Also, add calls to ext4_fc_track_inode at the right places. With this patch, now calling ext4_reserve_inode_write() results in inode being tracked for next fast commit. This ensures that by the time ext4_reserve_inode_write() returns, it is ready to be modified and won't be committed until the corresponding handle is open. A subtle lock ordering requirement with i_data_sem (which is documented in the code) requires that ext4_fc_track_inode() be called before grabbing i_data_sem. So, this patch also adds explicit ext4_fc_track_inode() calls in places where i_data_sem grabbed. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://patch.msgid.link/20250508175908.1004880-3-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
If the inode that's being requested to track using ext4_fc_track_inode
is being committed, then wait until the inode finishes the
commit. Also, add calls to ext4_fc_track_inode at the right places.
With this patch, now calling ext4_reserve_inode_write() results in
inode being tracked for next fast commit. This ensures that by the
time ext4_reserve_inode_write() returns, it is ready to be modified
and won't be committed until the corresponding handle is open.

A subtle lock ordering requirement with i_data_sem (which is
documented in the code) requires that ext4_fc_track_inode() be called
before grabbing i_data_sem. So, this patch also adds explicit
ext4_fc_track_inode() calls in places where i_data_sem grabbed.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20250508175908.1004880-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>