linux.git/fs/nilfs2/btnode.c, branch v4.14.311

nilfs2: fix lockdep warnings in page operations for btree nodes

2022-10-26T11:16:56+00:00

commit e897be17a441fa637cd166fc3de1445131e57692 upstream.

Patch series "nilfs2 lockdep warning fixes".

The first two are to resolve the lockdep warning issue, and the last one
is the accompanying cleanup and low priority.

Based on your comment, this series solves the issue by separating inode
object as needed.  Since I was worried about the impact of the object
composition changes, I tested the series carefully not to cause
regressions especially for delicate functions such like disk space
reclamation and snapshots.

This patch (of 3):

If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at
inode_to_wb() during page/folio operations for btree nodes:

  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline]
  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline]
  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
  Modules linked in:
  ...
  RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline]
  RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline]
  RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
  ...
  Call Trace:
    __set_page_dirty include/linux/pagemap.h:834 [inline]
    mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145
    nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline]
    nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085
    nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
    nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625
    nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009
    nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048
    nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline]
    nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline]
    nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036
    nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372
    nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline]
    nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563
    kthread+0x405/0x4f0 kernel/kthread.c:327
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

This is because nilfs2 uses two page caches for each inode and
inode->i_mapping never points to one of them, the btree node cache.

This causes inode_to_wb(inode) to refer to a different page cache than
the caller page/folio operations such like __folio_start_writeback(),
__folio_end_writeback(), or __folio_mark_dirty() acquired the lock.

This patch resolves the issue by allocating and using an additional
inode to hold the page cache of btree nodes.  The inode is attached
one-to-one to the traditional nilfs2 inode if it requires a block
mapping with b-tree.  This setup change is in memory only and does not
affect the disk format.

Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com
Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org
Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.com
Signed-off-by: Ryusuke Konishi 
Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com
Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com
Reported-by: Hao Sun 
Reported-by: David Hildenbrand 
Tested-by: Ryusuke Konishi 
Cc: Matthew Wilcox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

fs: add i_blocksize()

2017-02-28T02:43:46+00:00

Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.

This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'

Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.

[geliangtang@gmail.com: truncate: use i_blocksize()]
  Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick 
Signed-off-by: Geliang Tang 
Cc: Alexander Viro 
Cc: Ross Zwisler 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: use BIT() macro

2016-08-02T23:35:21+00:00

Replace bit shifts by BIT macro for clarity.

Link: http://lkml.kernel.org/r/1465825507-3407-3-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: have submit_bh users pass in op and flags separately

2016-06-07T19:41:38+00:00

This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.

Signed-off-by: Mike Christie 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

nilfs2: clean up old e-mail addresses

2016-05-24T00:04:14+00:00

E-mail addresses of osrg.net domain are no longer available.  This
removes them from authorship notices and prevents reporters from being
confused.

Link: http://lkml.kernel.org/r/1461935747-10380-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: remove FSF mailing address from GPL notices

2016-05-24T00:04:14+00:00

This removes the extra paragraph which mentions FSF address in GPL
notices from source code of nilfs2 and avoids the checkpatch.pl error
related to it.

Link: http://lkml.kernel.org/r/1461935747-10380-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

2016-04-04T17:41:08+00:00

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 -  << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 -  >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov 
Acked-by: Michal Hocko 
Signed-off-by: Linus Torvalds

nilfs2: use mark_buffer_dirty to mark btnode or meta data dirty

2011-05-10T13:21:57+00:00

This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty
macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty,
an own mark buffer dirty function.

Signed-off-by: Ryusuke Konishi

nilfs2: always set back pointer to host inode in mapping->host

2011-05-10T13:21:57+00:00

In the current nilfs, page cache for btree nodes and meta data files
do not set a valid back pointer to the host inode in mapping->host.

This will change it so that every address space in nilfs uses
mapping->host to hold its host inode.

Signed-off-by: Ryusuke Konishi

nilfs2: get rid of NILFS_I_NILFS

2011-05-10T13:21:56+00:00

This replaces all references of NILFS_I_NILFS(inode)->ns_bdev with
inode->i_sb->s_bdev and unfolds remaining uses of NILFS_I_NILFS inline
function.

Before 2.6.37, referring to a nilfs object from inodes needed a
conditional judgement, and NILFS_I_NILFS was helpful to simplify it.
But now we can simply do it by going through a super block instance
like inode->i_sb->s_fs_info.

Signed-off-by: Ryusuke Konishi