This modifies and extends the existing lcdc platform code to support
the new atmel_lcdfb driver. The ATSTK1000 board code is set up to use
the on-board Samsung LTV350QV LCD panel.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Avoid the costly notifier list in the pagefault path and call
the kprobes code directly.  The same change went into the 2.6.22
cycle for powerpc, 2s390 and sparc64 already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  [ARM] Use new get_irqnr_preamble
  [ARM] Ensure machine class menu is sorted alphabetically
  [ARM] 4333/2: KS8695: Micrel Development board
  [ARM] 4332/2: KS8695: Serial driver
  [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor
  [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board
  [ARM] 4372/1: Define byte sizes in asm-arm/sizes.h
  [ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.
  [ARM] Update mach-types
  [ARM] export symbol csum_partial_copy_from_user
  [ARM] iop13xx: msi support
  [ARM] stacktrace fix
  [ARM] Spinlock initializer cleanup
  [ARM] remove useless config option GENERIC_BUST_SPINLOCK
  [ARM] 4303/3: base kernel support for TI DaVinci
  [ARM] 4369/1: AT91: Fix circular dependency in header files
  [ARM] 4368/1: S3C24xx: build fix
  [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EK
  [ARM] Fix iop32x/iop33x build
  [ARM] EBSA110: fix build errors caused by missing "const"
  ...

Add support for Atmel's new AT91SAM9RL range of processors.
Includes similar peripherals as other AT91SAM9 processors, but with a
High-speed USB controller and various sizes of internal SRAM.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

These files are almost all the same.

This patch could be made even simpler if we don't mind POLLREMOVE turning
up in a few architectures that didn't have it previously (which should be
OK as POLLREMOVE is not used anywhere in the current tree).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Wire up sys_utimensat
  [AVR32] Fix section mismatch .taglist -> .init.text
  [AVR32] Implement dma_{alloc,free}_writecombine()
  AVR32: Spinlock initializer cleanup
  [AVR32] Use correct config symbol when setting cpuflags

Several drivers shared between AT91 and AVR32 chips use cpu_is_xxx()
to handle CPU-specific differences. Currently, such code needs to be
inside #ifdef CONFIG_ARCH_AT91 because the macros don't exist on AVR32.

By defining the same macros on both AT91 and AVR32, these #ifdefs can
be eliminated. Since the macros will evaluate to a constant value for
CPUs that aren't supported by the current architecture, any code that
is only needed on AT91 will be optimized away on AVR32 and vice versa.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tested with a slightly hacked version of the test case included with
the original utimensat patch. All OK.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Rename .taglist to .taglist.init to silence section mismatch warnings.
The .taglist.init section was already placed in the .init output
section along with .init.text, so the warning didn't indicate any real
problems.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>