linux.git/include/asm-powerpc/firmware.h, branch master

powerpc: Move include files to arch/powerpc/include/asm

2008-08-04T02:02:00+00:00

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where  was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell 
Signed-off-by: Paul Mackerras

powerpc/pseries: Enable CMO feature during platform setup

2008-07-25T05:44:42+00:00

For Cooperative Memory Overcommitment (CMO), set the FW_FEATURE_CMO
flag in powerpc_firmware_features from the rtas ibm,get-system-parameters
table prior to calling iommu_init_early_pSeries.

With this, any CMO specific functionality can be controlled by checking:
 firmware_has_feature(FW_FEATURE_CMO)

Signed-off-by: Robert Jennings 
Acked-by: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Consolidate CPU and firmware feature fixup macros

2008-07-01T01:28:25+00:00

The CPU and firmware feature fixup macros are currently spread across
three files, firmware.h, cputable.h and asm-compat.h.  Consolidate them
into their own file, feature-fixups.h

Signed-off-by: Michael Ellerman 
Acked-by: Kumar Gala 
Signed-off-by: Paul Mackerras

[POWERPC] celleb: Add support for native CBE

2007-12-11T02:34:40+00:00

This adds support for native CBE on Celleb, that is, without the BEAT
hypervisor.  Many codes in platforms/cell/ are used in native CBE
environment.

Signed-off-by: Kou Ishizaki 
Signed-off-by: Paul Mackerras

[POWERPC] Only use H_BULK_REMOVE if the firmware supports it

2007-02-08T04:02:35+00:00

The previous patch changing pSeries to use H_BULK_REMOVE broke the
JS20 blade, where the firmware doesn't support H_BULK_REMOVE.  This
adds a firmware check so that on machines that don't have H_BULK_REMOVE,
we just use the H_REMOVE call as before.

Signed-off-by: Paul Mackerras

[POWERPC] Celleb: basic support

2007-02-07T03:03:21+00:00

This patch adds base support for Celleb platform.

Signed-off-by: Kou Ishizaki 
Acked-by: Arnd Bergmann 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[POWERPC] ps3: multiplatform build fixes

2006-12-04T09:41:16+00:00

A few code paths need to check whether or not they are running
on the PS3's LV1 hypervisor before making hcalls. This introduces
a new firmware feature bit for this, FW_FEATURE_PS3_LV1.

Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES,
FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time,
which is a bug. The same problem can also happen for (PPC_ISERIES &&
!PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I
introduce a new CONFIG_PPC_NATIVE option that is set when at least
one platform is selected that can run without a hypervisor and then
turns the firmware feature check into a run-time option.

The new cell oprofile support that was recently merged does not
work on hypervisor based platforms like the PS3, therefore make
it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change
if we get oprofile support for PS3.

Signed-off-by: Arnd Bergmann

[POWERPC] ps3: Missed renames of CONFIG_PS3 to CONFIG_PPC_PS3

2006-12-04T09:41:14+00:00

When renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been
missed.

I also fixed up the alignment in arch/powerpc/platforms/Makefile.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Arnd Bergmann

[POWERPC] ps3: add feature bits

2006-12-04T09:40:46+00:00

Adds the needed firmware feature bits for the PS3.

Signed-off-by: Geoff Levand 
Signed-off-by: Arnd Bergmann

[POWERPC] Support feature fixups in vdso's

2006-10-25T01:54:07+00:00

This patch reworks the feature fixup mecanism so vdso's can be fixed up.
The main issue was that the construct:

        .long   label  (or .llong on 64 bits)

will not work in the case of a shared library like the vdso. It will
generate an empty placeholder in the fixup table along with a reloc,
which is not something we can deal with in the vdso.

The idea here (thanks Alan Modra !) is to instead use something like:

1:
        .long   label - 1b

That is, the feature fixup tables no longer contain addresses of bits of
code to patch, but offsets of such code from the fixup table entry
itself. That is properly resolved by ld when building the .so's. I've
modified the fixup mecanism generically to use that method for the rest
of the kernel as well.

Another trick is that the 32 bits vDSO included in the 64 bits kernel
need to have a table in the 64 bits format. However, gas does not
support 32 bits code with a statement of the form:

        .llong  label - 1b  (Or even just .llong label)

That is, it cannot emit the right fixup/relocation for the linker to use
to assign a 32 bits address to an .llong field. Thus, in the specific
case of the 32 bits vdso built as part of the 64 bits kernel, we are
using a modified macro that generates:

        .long   0xffffffff
        .llong  label - 1b

Note that is assumes that the value is negative which is enforced by
the .lds (those offsets are always negative as the .text is always
before the fixup table and gas doesn't support emiting the reloc the
other way around).

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras