linux.git/include/asm-ppc/mpc8260.h, branch master

powerpc: Remove arch/ppc and include/asm-ppc

2008-06-10T11:40:22+00:00

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk 
Acked-by: Arnd Bergmann 
Acked-by: Becky Bruce 
Acked-by: Benjamin Herrenschmidt 
Acked-by: Geert Uytterhoeven 
Acked-by: Grant Likely 
Acked-by: Jochen Friedrich 
Acked-by: John Linn 
Acked-by: Jon Loeliger 
Acked-by: Josh Boyer 
Acked-by: Kumar Gala 
Acked-by: Olof Johansson 
Acked-by: Peter Korsgaard 
Acked-by: Scott Wood 
Acked-by: Sean MacLennan 
Acked-by: Segher Boessenkool 
Acked-by: Stefan Roese 
Acked-by: Stephen Neuendorffer 
Acked-by: Wolfgang Denk 
Signed-off-by: Paul Mackerras

[PPC] Remove mpc8272 ads board from arch/ppc

2008-04-21T15:19:09+00:00

We have a board port in arch/powerpc so we dont need this one anymore.

Signed-off-by: Kumar Gala

[PATCH] ppc32: board-specific part of fs_enet update

2006-08-19T21:44:31+00:00

This contains board-specific portion to respect driver changes (for 8272ads ,
885ads and 866ads).  Altered platform_data structures as well as initial setup
routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in arch/powerpc.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Andrew Morton 
Signed-off-by: Jeff Garzik

Don't include linux/config.h from anywhere else in include/

2006-04-26T11:56:16+00:00

Signed-off-by: David Woodhouse

[PATCH] ppc32: Make platform devices being able to assign functions

2006-02-10T05:52:46+00:00

Implemented by  modification of the .name field of the platform device,
when PDs with the
same names are to be used within different drivers, as
 -> :
Corresponding drivers should change the .name in struct device_driver to
reflect upper of course.

Added ppc_sys_device_disable/enable function set, making it easier to
disable all the inexistent/not utilized platform device way pdevs. By the
check of the "disabled" bit in the config field of ppc_sys_specs, disabled
platform devices will be either added/removed from the bus, or simply not
registered on it, depending on the time when disable/enable call asserted.

The default behaviour when nothing is disabled/enabled will be "all devices
are enabled", which is the same as before.

Also helper platform_notify_map function added, making assignment of
board-specific platform_info more consistent and generic.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Paul Mackerras

[PATCH] ppc32: ppc_sys fixes for 8xx and 82xx

2005-10-29T04:49:29+00:00

This patch fixes a numbers of issues regarding to that both 8xx and 82xx
began to use ppc_sys model:
	- Platform is now identified by default deviceless SOC, if no
BOARD_CHIP_NAME is specified in the bard-specific header. For the list
of supported names refer to (arch/ppc/syslib/) mpc8xx_sys.c and
mpc82xx_sys.c for 8xx and 82xx respectively.
	- Fixed a bug in identification by name - if the name was not found,
it returned -1 instead of default deviceless ppc_spec.
	- fixed devices amount in the 8xx platform system descriptions

Signed-off-by: Vitaly Bordug 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Paul Mackerras

[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC II devices

2005-09-05T07:05:56+00:00

Added ppc_sys device and system definitions for PowerQUICC II devices.
This will allow drivers for PQ2 to be proper platform device drivers.
Which can be shared on PQ3 processors with the same peripherals.

Signed-off-by: Matt McClintock 
Signed-off-by: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge

2005-05-28T23:46:15+00:00

This patch adds on-chip PCI bridge support for the PQ2 family.  The
incomplete existent code is updated with interrupt handling stuff and
board-specific bits for 8272ADS and PQ2FADS; the related files were renamed
(from m8260_pci to m82xx_pci) to be of more generic fashion.  This is
tested with 8266ADS and 8272ADS, should work on PQ2FADS as well.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Linux-2.6.12-rc2

2005-04-16T22:20:36+00:00

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!