Remove all the MMIO support from the per-CPU timer driver, and switch
over to the standalove driver.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250814154622.10193-4-maz@kernel.org

Pull KVM/arm64 updates from Will Deacon:
 "New features:

   - Support for non-protected guest in protected mode, achieving near
     feature parity with the non-protected mode

   - Support for the EL2 timers as part of the ongoing NV support

   - Allow control of hardware tracing for nVHE/hVHE

  Improvements, fixes and cleanups:

   - Massive cleanup of the debug infrastructure, making it a bit less
     awkward and definitely easier to maintain. This should pave the way
     for further optimisations

   - Complete rewrite of pKVM's fixed-feature infrastructure, aligning
     it with the rest of KVM and making the code easier to follow

   - Large simplification of pKVM's memory protection infrastructure

   - Better handling of RES0/RES1 fields for memory-backed system
     registers

   - Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
     from a pretty nasty timer bug

   - Small collection of cleanups and low-impact fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
  arm64/sysreg: Get rid of TRFCR_ELx SysregFields
  KVM: arm64: nv: Fix doc header layout for timers
  KVM: arm64: nv: Apply RESx settings to sysreg reset values
  KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
  KVM: arm64: Fix selftests after sysreg field name update
  coresight: Pass guest TRFCR value to KVM
  KVM: arm64: Support trace filtering for guests
  KVM: arm64: coresight: Give TRBE enabled state to KVM
  coresight: trbe: Remove redundant disable call
  arm64/sysreg/tools: Move TRFCR definitions to sysreg
  tools: arm64: Update sysreg.h header files
  KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
  KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
  KVM: arm64: Drop pkvm_mem_transition for FF-A
  KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
  KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
  arm64: kvm: Introduce nvhe stack size constants
  KVM: arm64: Fix nVHE stacktrace VA bits mask
  KVM: arm64: Fix FEAT_MTE in pKVM
  Documentation: Update the behaviour of "kvm-arm.mode"
  ...

Switch to using hvhdk.h everywhere in the kernel. This header
includes all the new Hyper-V headers in include/hyperv, which form a
superset of the definitions found in hyperv-tlfs.h.

This makes it easier to add new Hyper-V interfaces without being
restricted to those in the TLFS doc (reflected in hyperv-tlfs.h).

To be more consistent with the original Hyper-V code, the names of
some definitions are changed slightly. Update those where needed.

Update comments in mshyperv.h files to point to include/hyperv for
adding new definitions.

Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-5-git-send-email-nunodasneves@linux.microsoft.com
Link: https://lore.kernel.org/r/20250108222138.1623703-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Inject some sanity in CNTHCTL_EL2, ensuring that we don't handle
more than we advertise to the guest.

Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

Although FEAT_NV2 makes most things fast, it also makes it impossible
to correctly emulate the timers, as the sysreg accesses are redirected
to memory.

FEAT_ECV addresses this by giving a hypervisor the ability to trap
the EL02 sysregs as well as the virtual timer.

Add the required trap setting to make use of the feature, allowing
us to elide the ugly resync in the middle of the run loop.

Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

Add the required handling for EL2 and EL02 registers, as
well as EL1 registers used in the E2H context. This includes
handling the virtual timer accesses when CNTHCTL_EL2.EL1TVT
or CNTHCTL_EL2.EL1TVCT are set.

Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>

read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).

Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.

Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() ->  tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().

Cc: stable@vger.kernel.org
Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>

This timer HW supports 8, 16 and 32-bit timer widths. This
driver currently uses a u32 to store the max possible value
of the timer. However, statements perform addition of 2 in
xilinx_pwm_apply() when calculating the period_cycles and
duty_cycles values. Since priv->max is a u32, this will
result in an overflow to 1 which will not only be incorrect
but fail on range comparison. This results in making it
impossible to set the PWM in this timer mode.

There are two obvious solutions to the current problem:
1. Cast each instance where overflow occurs to u64.
2. Change priv->max from a u32 to a u64.

Solution #1 requires more code modifications, and leaves
opportunity to introduce similar overflows if other math
statements are added in the future. These may also go
undetected if running in non 32-bit timer modes.

Solution #2 is the much smaller and cleaner approach and
thus the chosen method in this patch.

This was tested on a Zynq UltraScale+ with multiple
instances of the PWM IP.

Signed-off-by: Ken Sloat <ksloat@designlinxhs.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/SJ0P222MB0107490C5371B848EF04351CA1E19@SJ0P222MB0107.NAMP222.PROD.OUTLOOK.COM
Signed-off-by: Michal Simek <michal.simek@amd.com>

Currently hv_read_tsc_page_tsc() (ab)uses the (valid) time value of
U64_MAX as an error return. This breaks the clean wrap-around of the
clock.

Modify the function signature to return a boolean state and provide
another u64 pointer to store the actual time on success. This obviates
the need to steal one time value and restores the full counter width.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>  # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.775630881@infradead.org

With ECV and CNTPOFF_EL2, it is very easy to offer an offset for
the physical timer. So let's do just that.

Nothing can set the offset yet, so this should have no effect
whatsoever (famous last words...).

Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-5-maz@kernel.org